DO NOT WATCH!! You will want one of these Foam Cannons. MJJC S V3.0 vs MJJC PRO V2.0
Вставка
- Опубліковано 30 кві 2023
- YOU NEED ONE OF THESE FOAM CANNONS. MJJC makes a high quality foam cannon for auto detailing. The snow foam is thickest in the detailing industry. The new MJJC S V3.0 is new foam cannon in their lineup. I test it against MJJC foam cannon pro V2.0. Old faithful. I have used the MJJC foam cannon pro V2.0 for several years and really like it. I have almost every foam cannon (Foam Lance) out there and this is the one. Let me know what you think about these MJJC foam cannons. IMO MJJC makes the best snow foam gun. It feels nice in the hand and is made of all high end components. Use this MJJC Foam cannon for a pre wash, Foam cannon soap application, wheel cleaner or anything else you want to spray foam with. flush it out with water after use to prolong filter life.
Check out my website for all of my favorite car detailing products, deeper explanations and links to purchase. Thank you for supporting the HAWAII DETAILING channel.
www.hawaiidetailing.com
www.hawaiidetailing.com/foamc...
Here are the links to the Foam Cannon products used in the video:
Grape Koolaid Foam Cannon Soap bit.ly/4aevdGR
MJJC Foam Cannon Pro V2.0 (DIRECT FROM MJJC MANUFACTURER $89) www.mjjc.com/products/foam-ca...
MJJC Foam Cannon Pro V2.0 amzn.to/3I8H26r
Unbranded Bottle and Cap Kit www.mjjc.com/products/this-is...
Branded Spare Bottle www.mjjc.com/products/1200ml-...
Bottle Cap www.mjjc.com/products/this-is...
Spare Parts MJJC Foam Cannon Pro V2.0
Filter www.mjjc.com/products/mesh-fi...
Filter Amazon amzn.to/3M4q37G
Intake Hose www.mjjc.com/products/chemica...
MJJC Foam Cannon S V3.0 (DIRECT FROM MJJC MANUFACTURER $89) www.mjjc.com/products/mjjc-fo...
MJJC Foam Cannon S V3.0 amzn.to/3HKKjsn
MJJC S V3.0 Spare Bottle www.mjjc.com/products/spare-b...
Spare Parts MJJC S V 3.0
Filter www.mjjc.com/products/mesh-fi...
Intake Hose www.mjjc.com/products/chemica...
Filter Amazon amzn.to/3M4q37G
Links to my website. See all my product recommendations and get more in depth details and product links. www.hawaiidetailing.com/
MY FAVORITE AMAZON PRODUCTS www.amazon.com/shop/hawaiites...
SUBSCRIBE / @hawaiidetailing
UA-cam / @hawaiidetailing
FACEBOOK / hawaiitesladetailing
INSTAGRAM / hawaiidetailinghq
TIKTOK / hawaiidetailing
PLAYLISTS
PRESSURE WASHER • CUSTOM PRESSURE WASHER...
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
GRILL • Grill Videos
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.
#detailing #hawaiidetailing #cleaning - Авто та транспорт
I am Back. Hopefully with a more steady flow of content. Thanks for following the channel. Without all of my supporters there is no channel. I appreciate you. Check out my website for links to all my favorite products with detailed info and my way of using them. www.hawaiidetailing.com/foamcannon
It's great to see you back. I missed seeing your entertaining videos.
Awesome! Glad to see you are back and I hope everything is all good! Now on with the videos!
Thank You
Yes! The best Detailing channel on the planet is back baby! Everyone needs to subscribe to you. I can’t believe your channel doesn’t have over 100k yet!
Thanks man. I really appreciate it.
When you see the foam, You're in the zone 😂
Bruh you been in TikTok huh 😂😂
Fz150
I just saved myself a hundred and fifty bucks.
@@Mr.SparkleOG 😂😂😂 truly original
Don’t do my boy like that! 😉
I just recently got into detailing, you’re channel has been my favorite. Your laugh and sense of humor rocks. I do wish you would make some back to the basics videos now and then such as showing a full exterior wash. Thanks for the work, I’m sure it takes several hours of your time to crank out one of these videos.
I have some great ideas for the channel. Hopefully you will like some of the videos that will be coming.
New favorite detailer , you’re videos are very well made and you cut straight to the point no bs . Cheers man you’re teaching me a lot.
Thanks a lot. I appreciate you following the channel.
Glad you’re back! Some of the best content on UA-cam! Keep it coming man!
Thank you. I appreciate it.
You are the only detailing channel I watch , so entertaining and good reviews .Don’t ever stop the slams at the end as that’s you and I laugh for an hour 😂😂😂👍
Glad you like them!
Glad you are back man. Missed you on the tube!
Thanks a lot
Great to see you back at it… we missed your videos!
Thanks.
Awesome vid dude, glad you are back!!!
Thanks. Good to be back.
Always love your content Jeremy. I think I laughed 5 times during this video. Good information and I like thick foam also!! :) Keep the content coming, you do a great job!
Thank you. I appreciate it.
Glad to see you back! Right on!
Yes. Will be making some more regular content this summer. Thanks.
I love your energy! Subscribed.
Thank you.
FINALLY!! My favorite straight shooter is back!! Awesome video, as always. Thanks for the comparison. It's going to be nearly impossible to beat that MJJC Pro. I purchased a Griots 'The Boss' for my shop and it's been pretty impressive. Maybe one day you'll give it a title shot.
Even the griots brilliant finish isn't bad
I have tried it and it pretty good for sure. My favorite right now is the MJJC Pro. Thanks.
I have the MJJC Pro and I love it. There's no reason to look elsewhere when this unit works perfectly, especially with the 1.1 orifice installed. I use Bilt Hamber Auto Foam for most of my prewashes and it's designed to be runny, but sometimes I'll use a PH neutral soap so I can see the thick foam. I like the ending where you're showing that you're rinsing out the foam cannon to get rid of any residual chemicals. Awesome video as usual Jeremy.
Thank you. I appreciate you following the channel
where do I get the 1 to 1 orface
amzn.to/42kL9Uh
New follower, I had to comment.. this channel is amazing.
Thanks a lot.
My V3 just came in the mail yesterday. Can’t wait for some decent weather to use it. 😀
Yeah. Will be good. Swap the orifice and foam it up.
That's some darn good foam!
The only thing I hate about this channel is there’s not enough content 😂 Jeramy is awesome love the channel love his laugh laugh his style. Keep it up 👍
Thanks you. I appreciate you following the channel.
I have been thinking about getting another foam canon and have been wondering which MJJC model to get so this was a helpful video. Also I have been using DIY's incredible suds too and it is great stuff.
You can’t go wrong with an MJJC and some incredible suds. Thanks for watching
Awesome channel man new subscriber, do you have any advice for white wall tires
I love thick foam. That sound when it slaps the ground. Also it gets a ton of looks from the neighbors and people passing by. I might get a bottle of that purple colored stuff from Adams just for fun during the summer months. Show off a little for the neighbors. 😂
Yeah. It makes it fun. I like it too.
Such an awesome channel!
Thank you. I appreciate it
Thanks for the water bottle tip thread tip with the Pro V2. Works great for rinsing out the cannon when the bottle still has leftover product in it. I usually throw a ziploc sandwich bag or Saran/plastic food wrap over the lid with an elastic when I have some extra product leftover too.
Thanks.
Great video - I just bought an MJJC pro like it but not getting the foam you are - what pressure washing are you using? I have a Craftsman 1900 psi, is this enough?
Just got mine haven’t used it yet I’m excited!
Let us know how you like it.
I've missed the crap out of your content man! For now I will have to rock the IK Foam 12 since I don't have access to running water. Hopefully soon it will be setup with their new battery compressor!
Thank you. Yeah buddy good to hear you are making it happen.
No doubt that is some good looking foam! I am now a Bilt Hambre touchless fan so I don't worry about foam anymore just cleaning power.
Awesome.
This is for the foam finatics! Great video.
Thanks
Thank you for using DIY Detail Incredible Suds
It’s a great soap. It has a home on my shelf now. Thanks for watching
Love your vibe. Yeahhhhh.
I’ve been waiting patiently for a new Pro V 3 that is rumored to be coming out this summer. Heard anything about ETA or possible specs?
No. I have not heard anything. If I do it will get a test right here. Thanks for watching
Maybe the longest arms I ever seen.
Now that’s awesome.
Hahahah
Hi Jeremy, I'm a big fan! Thanks for an amazing content, you're awesome!!!!
Quick question - what dilution ratio would you recommend for Adam's Mega Foam with MJJC Pro Foam Cannon?
Thanks again!
I would start with 2oz of mega foam and the rest warm water. That's what I use. Give it a test and you can go up or down from there.
@@HawaiiDetailing Thanks Jeremy!
I use the MTM and it’s the only one I have experience with but MJJC pro would be my next cannon if needed.
I like the MTM too but I like these better.
Love the foam!
Thanks
I might have to buy myself the pro version as it looks like it would be more stable when you set it down. 👏
Thanks for watching Paul.
On my Pro 2.0 there are no inner threads quite like yours but it does have two little notches which seem to grab the threads of a standard 16oz spray bottle. Doesn't hold quite as tight but still does hold.
Interesting they did away with that. It was a cool feature.
Hey Jeremy with a Comet 1700 pressure washer or a Kranzle 1322TS you still swap to the 1.1 nozzle or you use the 1.25? Nice video! I use the PF22.2 and the Griots Brilliant shine foam cannon butI think I will give the Pro a try!
I would be careful pushing your Kranzle pressure washer too hard with the smaller 1.1. It can make it run hard and wear it out premature. For some people they don't care but you have to be the judge of your tolerance on that. If it were to break it would be a bummer. The manufacturer definitely does not recommend it. For lower output PW's its a must do mod.
HES BACK!!!!!!
Yessss
The v3 works great. More of a tip over risk but I like that I don’t need a measuring cup. If you use 2-3 oz of incredible suds, the stock orifice is enough
Nice. Thanks for sharing
I like Bilt Hamber’s Panel Impact Ratio. It’s perfect for how much product to use.
All the places I shop at say not to use a 1.1 orifice when you have a high psi/gpm power washer. You read up on that?
If you have a high output pressure washer be careful with too small of an orifice. It’s not recommended by the manufacturer. If you have a lower output PW it’s a must do mod.
Well I do want one
I told you. Hahahaha
Did know about the cap for the pro ! No more waste.
Yeah its a cool add on for sure
I have the Pro and love it. I just wanna get a 1/4 inch set up with a short trigger gun too
Yes. That’s a must have item when you can. It makes the user experience way better.
@@HawaiiDetailing funnily, I'm looking at the MJJC short trigger gun and the MJJC adapter, full set up. I'm just waiting on the 1/4 MJJC adapter to turn up on stock....come on In2detailing! Haha 😄
Hmmm looking at the inside of the cap for the pro version it looks like it just adapts the small neck to a wide cap. Have you tried taking it off and putting it on a small neck cannon such as the mtm? Could be used to turn old foam Cannon into wide necks
Not sure will have to look.
I bought the 3.0 just because it's blue lol to match my setup. Honestly wish they would have kept the same design as the PRO just offered it in blue.
Yeah. Thats a great idea.
I just did the same thing because of the color!
Great video! MJJC Pro is still the best 💪😎
I agree. Thanks.
Is it safe to run a 1.1 orifice foam canon on a kranzle 1322ts? Obsessed garage stated using a 1.1 can cause damage to the pump but I'm guessing it's something you've been doing for quite awhile now. I have a 20 amp dedicated outlet so no worries on that end. Have you noticed any issues with a 1.1 on the kranzle?
I would not use anything that will void you warranty of cause damage. I am not sure if a 1.1 will mess up the Kranny or not?? Sorry I don't have a better answer.
Can you review the Feng pai foam Cannons? They're a clone of these but for 13-25$ very very very good foam for the price
Sure. Thanks for the suggestion
@@HawaiiDetailingnice. Can't wait you got the best reviews
I will be absolutely shocked if there is ever a better foam cannon than the MJJC pro v2 and the day that comes I will buy it too
I agree. Thanks for watching
What size hose are using I don’t like mine to stiff. So what would you recommend?
I use a 3/8 x 100' here are a few good economical options amzn.to/3VsRoTX if you want top of line line I can help you with that too
Cool personality
Thank you.
If you’re still doing snow foam comparisons you gotta get Technicians Choice Grape & Glow in!
Will give it a look
I have a question man , I have the MJJC pro I changed the orfice to 1.1 and on my green works pro 3000 psi for some reason idk if I got the soap amounts wrong but my foam comes out more runny then thick is it the soap or the pressure can you help ?
What soap are you using? Try this: diydetail.com/collections/all/products/incredible-suds?ref=ySA6chMa or this: amzn.to/3HyRXG0 also @3000 psi I would use consider using the larger orifice
You need to try Griots Boss cannon bro. Hands down the best Wash experience
He did about a year ago! ua-cam.com/video/4g3G3xNorCY/v-deo.html
He has. It's great and higher quality but doesn't foam as well as either MJJC.
@@KiranPatel-fk1pg oh ok gotcha. Yeah it’s the quality I love the most
Yes I want one lol I’ve been saying that I’m going to wait for my MTM pf 22.2 to die, but I’ll end up giving in and buying one of these 😂
It’s a good cannon. I have a few. I still use the MTM for my wheels.
I just go the 2.0 pro , best ive ever used
Yea I agree.
where do you get the caps to the foam cannons?
Links in the description. Thanks
How much psi does the pressure washer need to be able to produce this kind of thick foam? Is it possible to be able to use a wireless pressure washer?
Mine is about 1000 psi. 800 and below would be pushing it.
Jeremy of Hawaii Detailing is the Rex Kwon Do foam dojo sensei!
Hahahaha. Thanks.
Trust no man with flip flops😂 still here watching ur vids👍🏽
I will never bullshit any of you. I am able to do this channel because of the viewers and will never let you guys down. I want everyone to get good stuff and be amped about it. Thanks for watching.
😂😂😂 the end of the video is the best
Thanks
What the ratio you put in the foam cannon I think I missed that part?
2oz
I don't think the MJJC pro has threads for a smaller bottle anymore (the Griots Boss does). I just checked my 2xMJJC Pros ,1 year old and both are blank on the inner cap :(. Is your MJJC Pro an older unit?
Not sure why they would take them away.
Also miss the weighted ball on the MJJC does not have room for a metering tip, not a huge deal but the option would be nice..
Wow yes i just noticed my new one does not have the threads. Thats a bummer.
I'll stick with my old MJCC. I get the clear plastic bottle.. But I don't know why they didn't make the mouth and the base wider like the old one.
Mee too. The new one is cool but I like the pro version.
Same top assembly -- the only difference is from the top down. That's why I'm going to wait until the Pro v3 comes out. Also, I would definitely not recommend using a 1.1 orifice with your Kranzle. It puts far too much wear and tear on the motor.
I listed it as an option for owners of less powerful electric PW’s. Thanks though.
How durable is the bottle of the new one?
I have not had any issues with it at all.
I have the pro 2. The threads on the bottle stripped therefore I have to order a new bottle. On the new version I like to bottle better.
Thanks for watching. Bummer the threads stripped out. Man I have beat mine up and still good to go.
does that oriface come with it?
Yes.
So this is how they create snow in the movies.
What pressure setting?
About 1000 psi.
Does it come with a 1mm orifice?
Yes
@@HawaiiDetailing sorry I just rewatched the video and saw that you mentioned it. Thanks!
Jeremy. Best way to remove pine tree sap from my black Tesla model 3?
He replied to your other comment on the other video with the best solution
I would use a tar and sap remover like this. amzn.to/42a2H60 Test and get familiar with the product before you go all in. its easy to use but better to get your technique and plan down in an inconspicuous area first. Clean the car before you do this process. Spray Sap remover on and let the product do its work before you wipe it off. Be careful not to leave it on for too long before you wipe it off. Use a high quality microfiber towel to avoid marring the paint. Something like this amzn.to/3LCFnGP You will know its going good if you are able to wipe it off without any real pressure on the towel. Adjust dwell time to get it right. With detailing its always a balance between dwell time to avoid scrubbing but not so long it drys or has any other negative affects. After the sap is removed wash the car or do a rinseless wash on the panel to remove any residual product. Hope that helps.
@@HawaiiDetailing thank you!
@@HawaiiDetailing just wanted to say thank you! The tar and sap remover you recommended worked great!!! Can’t say thanks enough!
How's the soap smell?
Like grape koolaid. It smells good.
Foam then flex?
Yeah.
Have them both, looking to sell the V3. 🤷🏾
I like the Pro better
I'll buy one of these cannons but first I need an Electric ⚡ Pressure Washer
Yes. It’s the way to go.
I want to win one of theses. Lol
They have a cap? 🤦🏻♂️ damn learned something new 😂😂😂
Yes they are awesome. Links in the description
hahaha 10 times better than my pf22
It has a an edge for sure.
Pro version is better. They needed to make a substantial upgrade for people to switch over and buy the new one.
In my opinion, they foam the same, I already did the test myself. There is no way to get more foam out of those things that’s the maximum foam you can get nobody is going to come out with something that foams better or thicker is not possible ,gravity remember that gravity I did test with 10 ounces of foam on different ratios, same thickness, foam , people there is no way to get more foam than this period
First!
Yeah Buddy
Alittle Over Priced.😂😂😂
You get what our pay for with any tool. But I agree it’s not cheap. Thanks for watching
One useless an under entertaining Video...