Эта перемычка 100 кг не весит , всегда такие руками ставили в проём , а эти поднять не хотят . И как он собрался на этой телеге по стройки ездить . Тот кто не строил - тому шикарно . На стройке когда перемычки ставят - ровных стяжек ещё нет , а все перемычки лежат на улице рядом с плитами перекрытия , их надо в здание по ступеням занести , на ровный пол положить( которого ещё нет ) , потом на улицу вынести , и краном положить , ну или как всегда руками , лучше верёвкой и вчетвером , по 50 кг на человека нормально , значит перемычку на 200 кг ложат руками.
VERY NICE BUILD! You could add one or two fold out outriggers with feet you could lower on the side where the crane mounts. This way you can prevent the cart from tipping over if the load is too much for the crane side and if you have to unload on the crane side. Love the locking brake on the front wheel, excellent idea!
Very interesting build, I would have put Akerman geometry on the steering so the wheels turn correctly relative to each other, the rest I would build as you did. One thing in your use of the crane, never choke your lifting wire, always use a strop, (you could make a box to sit underneath to hold strops and chains), choking the wire damages it and can cause it to fail eventually, stay safe so we can watch your future builds.
Me asombra la técnica y la facilidad con que aplica la soldadura de argón tig hojala y diera una cátedra en la aplicación de sueldar un abrazo fuerte de su amigo saludos de Iztacalco Cd de México gracias
It lacks some extendable supports to avoid tipping due to displacement of the center of gravity. The cranes have four extendable arms that increase the safe surface of the load movement. I would have put the crane in the middle just above the front axle. You could have designed the same car without so much height to the ground (it is not necessary to lift the load so much to move it). For the rest, this is very good. Congratulations for being so creative.
So what gives a given vehicle its strength? Is it the gwv or the materials used as the reinforcements to support such a load? Lets say we have a typical car, say panda @ 3,800. 4banger 220hp, 200pf, how much could this said vehicle pull or lift with a prefabed harden steel bracket modified at some point where the unibody frame is structurally sound? I ask because you seem to be knowledgeable about crane tolerances, booms, lifts, ECT. Im trying to understand these tolerances that are sometimes given for safety, but can probably exceed there limits if reinforced by fabricated brackets like a winch plate or something chemically engineered to flex, bushings/ spring loads that withstand major forces & remain intact.
I think that is good enough to win the Noble peace prize for fabrication
Many thanks for your compliment!
Va
I want one of these, for absolutely no reason!
I don't sell. Sorry!
Rất thích,Hoàn toàn tuyệt vời xây dựng! Rất ấn tượng với kết quả cuối cùng!👍
Thanks!
thông minh và sáng tạo,cảm ơn anh
Thanks!
you have wonderful hands and brains, creating useful products, looking forward to interacting with you, thanks
Thank you so much!
Thank you so much!
Very creative idea thanks for sharing this new friend
Thank you so much!
tôi học được ở anh rất nhiều,cảm ơn Anh
Thanks!
Nice thought, congratulations
very good job .. up to you
Thank you so much!
Огонь. Шикарная работа. Мастеру браво и респект. 🔥🔥🔥👍👍👍👋👋👋🤝🤝🤝
Thank you so much!
@@fawabros 1111
Эта перемычка 100 кг не весит , всегда такие руками ставили в проём , а эти поднять не хотят . И как он собрался на этой телеге по стройки ездить . Тот кто не строил - тому шикарно . На стройке когда перемычки ставят - ровных стяжек ещё нет , а все перемычки лежат на улице рядом с плитами перекрытия , их надо в здание по ступеням занести , на ровный пол положить( которого ещё нет ) , потом на улицу вынести , и краном положить , ну или как всегда руками , лучше верёвкой и вчетвером , по 50 кг на человека нормально , значит перемычку на 200 кг ложат руками.
VERY NICE BUILD!
You could add one or two fold out outriggers with feet you could lower on the side where the crane mounts. This way you can prevent the cart from tipping over if the load is too much for the crane side and if you have to unload on the crane side. Love the locking brake on the front wheel, excellent idea!
Many thanks for your advise!
U⁷788i
Ç
Lp
Sfj
My grandson would love that, nice job..
Thank you!
Measurements would be great
Wow
Very nice
Thank for shearing
You are welcome!
Congratulações ❤😊🎉 Brasil 💚 💛
Вдвоем перенесли бы этот столбик без тележки. А тележка мощная.
You're too strong!
nice work well done. thanks
you are welcome!
Manteppppp mas bro sangat bermanfaat sekali....
Semangat dan sukses selalu mas bro
Salam sukses dari kalbar mas bro
Thank you and welcome!
Хороший подъёмный кран
Thank you so much!
Nice, a few little changes would make it great
Thank you!
I'll build a larger one, with variations, is a very good job
SUPER COOL!
Thank you!
Excellent 👍👍👍. Thanks for sharing
You are welcome!
Yes me
thanks you mate👋🇮🇩from indonesia
Да получилось круто.
Отличный ролик.
Авторы на славу заморочились
лайкос за сторания
😎👍
Thanks!
Very useful video.👍
Thank you!
Good job.
Thanks!
Pretty slick.. 👍🏽👍🏽
Thank you!
I'd like to know what the 486 people know that I don't know. This is brilliant. Thanks for sharing.
Thank you so much!
Obriga Fawa Bros, idéia genial e excelente demonstração. Mas, por favor, me diga que aparelho de solda você utilizou?
Absolutely brilliant build! Very impressed with the final result!
Thank you so much!
🙏🏿 good 👍
Thank you!
super technique
Thanks!
Meu amigo está de parabéns falo de São Paulo Brasil
Thank you so much! I love Brasil too.
It's nice video... 👍🏻👍🏻 Success for you Brother 🙏🏻🙏🏻🙏🏻
Thank you so much!
just three words... center of gravity
Superb!! 👏🏼👏🏼👏🏼👏🏼
Thank you so much!
Very interesting build, I would have put Akerman geometry on the steering so the wheels turn correctly relative to each other, the rest I would build as you did. One thing in your use of the crane, never choke your lifting wire, always use a strop, (you could make a box to sit underneath to hold strops and chains), choking the wire damages it and can cause it to fail eventually, stay safe so we can watch your future builds.
Many thanks for your useful opinions!
Agree about the steering. I didn't know about the wire, thanks for the advice I'll keep that in mind. Cheers.
Э
Хэхэ
the woo wow song is driving me insane
Sorry!
Very good
Thanks!
tài nghệ của anh thật là tuyệt vời
Jejksudjsydh e você pode ser uma boa
Muito bom! Inscrito aqui no Brasil... Very good!
Классный манипулятор получился.🔥🔥🔥🔥🔥
I don't understnad your opinions!
Very cool.
Thanks!
MANTAP 👍👍👍
Thank you!
Pritty neat i could see it come handy
Yes, sure! Thank you so much!
Buena idea y bonito trabajo gracias por enceñarlos estos bonitos trabajos e ideas gracias 🇨🇱👍👍👍👍
You are welcome!
Hola me gustan sus ideas para poner a trabajar el cerebro un saludo desde Iztacalco cd de México felicidades
Thank you and welcome!
👍👍👍👍👍👍👍 !!!!!!! 🔥🔥🔥🔥🔥🔥🔥
Great video. Really appreciate it when you speed up the repetitive work. Great idea and I'll bet you will wear it out from using it so much.
Many thanks for your advise!
Good job my friend well done
Thank you so much!
0
You are really an expert.
Thank you!
Super awesome 👏
Thank you, my friend!
الله غربله على هالفضاوه
Thank you!
Pretty neat invention.
Thank you so much!
Very gooooooood
I laik your project.
Thank you so much!
Looks great. One small point... Ackerman angles on your tie rod ends. Will make the cart steer better.
Many thanks for your advise!
Nice, but a cheap hand truck would work as well.
Many thanks for your compliment!
Now! That is awesome
Very good.Mr.Good....
Thank you!
exelente trabajo desde venezuela , para trabajar con mas suavidad en el esfuerso, admirable magnifico.
Thank you so much!
Gostei, Muito bom esse pequeno guincho!
Thank bro!
78à1
It's very useful to lift and transfer heavy things like hard metallic in the corner
Yes, sir!
Well,,,,,,,, saludos desde el salvador c a
Welcome!
Invenção iteligenti eu do valor.0brigado meu irmão.
What kind of welder is that. Doing a good job for a small one. Good show.
Thank you. I use TIG welder. You should refer this one: bit.ly/3uha3Tl
@@fawabros р-н
Awsome , thank you
Thank you!
А колодезные кольца ентот погрузчик возьмет???😊😊😊
I don't understand your question.
@@fawabros Русские поймут !! Не беспокойтесь))
@@alexgfds294 игрушку смастерил мужик
Looks amazing love this
Thank you so much!
Da para tira motor de carro para manutenção! Ótima ideia
Yes, thank you!
Great job 2 T up , can you put wheel char motor to run by battery ? and brace bar support leg not to collab when you lift heavy stuff ,
❤Thank you❤❤❤❤❤❤❤
Super brother 💪 I make in try.please square pipe inches
Me asombra la técnica y la facilidad con que aplica la soldadura de argón tig hojala y diera una cátedra en la aplicación de sueldar un abrazo fuerte de su amigo saludos de Iztacalco Cd de México gracias
Solo escondo el polo negativo del soldador. Puede consultar los parámetros de esta máquina de soldar: bit.ly/3zRuNUY
Excelente trabajo muy útil gracias por compartirlo 💯💯💪🏽💪🏽 saludos desde Argentina 🇦🇷
Welcome and thank you!
ZARZA
скок епли чтоб жб столбик погрузить. я бы уже его давно сам унес в одиночку )))
Два человека вручную всё поднимут и отвезут!
It will better when you working for long time.
Awesome work 👍, I wish I could be that inventive.
You can do better than me. Come on!
Great job! Ingenious!
Thank you so much!
Ótimo carrinho para levantar e transportar cargas. Um desses iria bem na minha oficina, quando eu montá-la.
Abraços!
Thank you!
Op pp klllllpo99oo7. Iiiiii
Sensacional 👏👏👏👏👏👏👏👏😃😃😃
The video editing was excellent.
Thank you so much!
Brilliant work!
Many thanks!
Muito bom projeto, caprichado, útil. Valeu pela postagem, parabéns! Saúde, paz e sucesso, Deus o abençoe!!!!!
Thank you so much!
Você é um Gênio!!!
Thank you!
Muito top sua fabricação parabéns
Thank you so much!
wow good
Thanks!
It lacks some extendable supports to avoid tipping due to displacement of the center of gravity. The cranes have four extendable arms that increase the safe surface of the load movement. I would have put the crane in the middle just above the front axle.
You could have designed the same car without so much height to the ground (it is not necessary to lift the load so much to move it). For the rest, this is very good. Congratulations for being so creative.
Many thanks for your opinions!
So what gives a given vehicle its strength? Is it the gwv or the materials used as the reinforcements to support such a load?
Lets say we have a typical car, say panda @ 3,800. 4banger 220hp, 200pf, how much could this said vehicle pull or lift with a prefabed harden steel bracket modified at some point where the unibody frame is structurally sound?
I ask because you seem to be knowledgeable about crane tolerances, booms, lifts, ECT.
Im trying to understand these tolerances that are sometimes given for safety, but can probably exceed there limits if reinforced by fabricated brackets like a winch plate or something chemically engineered to flex, bushings/ spring loads that withstand major forces & remain intact.
👍
👍
Күшті
Great job!
Thank you!
Great video congratulations
Thank you so much!
Gostei Fawa muito bom ,um abraço.
Thank you so much!
Génial !
Thank you!
Hola "Genio". Excelente tu creación, y sobre todo para los que hacemos movimientos de cosas y nos tenemos que arreglar solos. Saludos de 🇦🇷. 👏👏👏👌👌👍😉
Muchas gracias por tu cumplido!
ü
Jhhnf
that was great if you know what to do with it god bless
Thanks!
Nice!
Thanks!
Awesome build. I'd have put a loop around the cable at the end of the crane
Nice done!
Nice build
Very nice 👍👍
Thank you!
@@fawabros 9
❤Super❤❤❤❤❤❤
Nice job, it would be good to have a better turning circle.
Many thanks for your opinions!
Hello, how are you waiting and can you answer me? What's that one minute 25:56 thing? and what are those little red things from minute 4:46
They are pulley that support for loader wire.