I picked this up from Lowe’s, threw away everything and attempted to assemble this hard hat and just about had a stroke. Thank god this video was out there😂🤣
Thank you for showing the actual folding of the clips and insertion. I could see by the instructions it wanted to fold the keys first, but I was trying to insert the folded portion like wtf! Thanks man!
Thank you. My supervisor just dumped these on us day one and expected us to figure it out with no instruction :( but this helped and I got it! thanks so much!
This video was SUPER helpful but must admit that I had to watch it at least 5x. The comments helped because you have to look closely to see what part of the tab goes into the slot! It is the solid part of the tab, not the "forked" part!
Thank you, I couldn't figure it out, until I watched your video, I tried another person's video, but it was not as detailed as yours, good job thank you very much, you took my frustration away👍👍
Everyone in the comments, you’re not alone. We’re complex human beings who were all stomped by this simple piece of plastic. Interesting 🤔 Thanks for this video though my good man. Really👌🏾
Thanks man, your a life saver. The instructions made no sense. This video was very helpful. Maybe instead of their instructions they should just put a link to your video. Haha.
I can't stop lmao at all the people in the comments who spent hours trying to assemble. When i looked in the mirror and seen that hat floating 3 feet above my head I said hell naw not today and went straight to youtube.
OMG Thanks! I was about ready to throw this damn thing in the trash! 3M should really ship these things pre-assembled. I went into a remote area one day without my helmet, but found one of these at a True Valley hardware store. I couldn't read the instructions without glasses, so the store clerk tried to help me, but it just fell back apart, because he didn't fold the mounts over first. So wound up doing an 85 ft rappel without a helmet.
Duh... As others have said, I spent way too long trying to figure this out! Video saved me from throwing it across the room. Once I saw what part of the "key" slipped into the slot I felt pretty stupid.
Mine came with an extra thin band that is not the 3M standard that go in the slots in the middle. What is it for? I just notice it fits perfectly in a hole in the back.
After finally getting this thing put together and wearing if for almost 2 months, the fact is that they don't give you enough harness for the hat to sit properly on the head. It doesn't sit down close enough to the ears so it looks goofy sitting on anyone's head. I realize there has to be a certain amount of space between the top of your head and the top of the helmet, but the helmet is too small to fit properly. It's a horrible design and should be chucked.
Me: throws out instruction. I guess I can just put this baby on. Wait I need to insert this!?!??!?!... omgooodness what can I do to fix this problem. :D UA-cam... ahhh
Dude! I spend like 3 hrs trying to figure this one out 🤣🤣🤣thank you!
Hahah me too! Thanks
For real dude I did it every wrong way
The instructions that come are TRASH
Hahah nigga me too loo
Same 😅
Yikes! For someone who stacks stone wall and lays complex patios, this hardhat had me stumped for hours! Thanks man! :)
Glad to hear, Jeff! More good content on the way! Subscribe to my channel to get more helpful videos! 👍
Thanks dude I was really trying to figure this out with the instructions for like 20 minutes. With your video I got it in under 5 🤙🏽
I picked this up from Lowe’s, threw away everything and attempted to assemble this hard hat and just about had a stroke. Thank god this video was out there😂🤣
Same still struggling
Oh, that was too easy. So easy that I couldn't solve it without this straightforward video. Thanks!
Thank you for showing the actual folding of the clips and insertion. I could see by the instructions it wanted to fold the keys first, but I was trying to insert the folded portion like wtf! Thanks man!
Me too man
Me also
Me too 😆
Me too 😭
I am still very confused and frustrated
I tried to understand the instructions, watched 3 videos (even from 3M), and I finally made it with your video!!
SAME !!!
CRAZY 5 hour process....
Thank god. Sounds like I’m not the only one that couldn’t get this. You’re a lifesaver
Thank you. My supervisor just dumped these on us day one and expected us to figure it out with no instruction :( but this helped and I got it! thanks so much!
This video saved my life😂 First day on the oil fields and I was not about to go ask my supervisor how to setup a hard hat
3M should hire you , thank you !
Thank you!!! My husband discarded the instructions and we couldn't figure it out. Thanks to you we are now wearing them correctly assembled 🎉🙌🏾
Be thankful he discarded the instructions before you wasted another half hour.
i sat in the home depot parking lot for 15 minutes trying to figure this out then got on youtube😂
thanks man!
Your instruction was SO much better than package. Thank you!
I think you just saved me from jumping off a building or something this has been irritating me for a while thank god you made this video
Thank u man, I just bought one for my dad and your video really came to the rescue...
Thanks a lot!!!! i spent 30 mins and a broken nail trying to figure this out .
This video was SUPER helpful but must admit that I had to watch it at least 5x. The comments helped because you have to look closely to see what part of the tab goes into the slot! It is the solid part of the tab, not the "forked" part!
Thank you, I couldn't figure it out, until I watched your video, I tried another person's video, but it was not as detailed as yours, good job thank you very much, you took my frustration away👍👍
Glad it helped!
I watched this ten times before I got it to work I’m hopeless 😭 thank you for the video!!
I spent so much time trying to figure it out. Thank you bro. Definitely didn't wanna ask someone on the job how to do it 😂
Good video. Very simple and easy and most of all, TO THE POINT.
Thank you Motley Guy! I just bought one at Lowes. I need it in order to take stuff to the local landfill.
Everyone in the comments, you’re not alone. We’re complex human beings who were all stomped by this simple piece of plastic. Interesting 🤔
Thanks for this video though my good man. Really👌🏾
Thanks man, your a life saver. The instructions made no sense. This video was very helpful. Maybe instead of their instructions they should just put a link to your video. Haha.
Thanks! I felt like an idiot trying to figure it out a good 5 minutes from the instructions on the bag, before I decided to look up a video on it.
damn this actually was helpful thanks dude
Thank you for making this man I was struggling
I'm spent 1 hour trying to figure out. thanks your video
Just saved my hours of frustration! Thank you!
I can't stop lmao at all the people in the comments who spent hours trying to assemble. When i looked in the mirror and seen that hat floating 3 feet above my head I said hell naw not today and went straight to youtube.
Man you’re a lifesaver!!!
Welder here and had to put it in backwards. Was confused as hell how I’m going to put this together thank man!
Thank you so much for showing us this I about had a fit trying to put this together
OMG....I tried several combinations and permutations. Thanks bro .
Thank you! I was watching the 3M and could NOT figure out inserting the keys
Thank you, the video was really useful!
Bro thank you so much. I was having an issue with installation.
Thank you. I've been trying to figure this out since forever.
Thank you very much. Been messing with it for an hour
I'm not one to use instructions, but even with the instructions I could not figure it out. Thank for the video!
yeah agreed, I had struggle for the first time assembling it. After watching this, it was super simple
Ammar Sabahul y jus t hug g y u yuh y hit up it u gf
Ammar Sabahul y jus t hug g y u yuh y hit up it u gf
Much better than the 3M vid- thanks!
Aye man thanks you help a lot me and my dad spent a whole hour just to fix this or clip it on thank you so much
JuanIsDaddy1 glad to hear! What’s your dad do for work?
The Motley Guy well I'm really not sure but he's learning to do different stuff in construction
Thank you! The most useful video ever
OMG Thanks! I was about ready to throw this damn thing in the trash! 3M should really ship these things pre-assembled. I went into a remote area one day without my helmet, but found one of these at a True Valley hardware store. I couldn't read the instructions without glasses, so the store clerk tried to help me, but it just fell back apart, because he didn't fold the mounts over first. So wound up doing an 85 ft rappel without a helmet.
I agree with you 100% ship them preassembled take the frustration out of it for your normal person
You’re a legend!
Duh... As others have said, I spent way too long trying to figure this out! Video saved me from throwing it across the room. Once I saw what part of the "key" slipped into the slot I felt pretty stupid.
I think the hard hat instructions on the package skipped the folding step….oh my… I was struggling. Thank you for this
Got one today, couldn't understand the guide. Found this vdu, thanks
You are a life saver!
Thanks, this helped me out alot
Very helpful video Thank you
Glad it was helpful!
Best video on this. Thanks man.
I can't believe I just had to watch a video on this assembly. 😳 😆
The Engineer called, he wants his hat back
Thank you so much! I watched the 3m video and was still stuck! I watched yours...wala!
Thank you very much. your video really help me
Glad to hear! You're most welcome.
Thank you. Sat here for 20 minutes getting mad
You made my day man 👍👍👍😂
Mine came with an extra thin band that is not the 3M standard that go in the slots in the middle. What is it for? I just notice it fits perfectly in a hole in the back.
Omg it’s ruined my night I couldn’t figure it out how to
I want a clasp where you can adjust the hat height
Thanks for helping me not look like a doofus
I almost murdered someone, trying to put this together before watching your video. Good Job. Thank you.
You just saved my ass 😂😂😂😂
thank you my boyfriend was having trouble putting it together
Thanks. The folding part was what i was doing wrong.
I threw out my instructions by accident and couldn't figure it out, thanks 😅
Glad to hear! Subscribe and get more helpful videos! 👍
Thanks man I used to just tape it to my head
THANKS
😍
thanks a million. I could not understand the diagram on the packaging
I still couldn't figure it out. The 3M bands are pulled too tight and the helmet sits up way too high on my head.
After finally getting this thing put together and wearing if for almost 2 months, the fact is that they don't give you enough harness for the hat to sit properly on the head. It doesn't sit down close enough to the ears so it looks goofy sitting on anyone's head. I realize there has to be a certain amount of space between the top of your head and the top of the helmet, but the helmet is too small to fit properly. It's a horrible design and should be chucked.
Thank you for saving my time! I read the instructions and still don’t understand.
Thanks, this helped! 👍
Thank man I was sitting with this thing for 20 mins 😅😂
Thanks man. Great help
Thank you so much. My first day on a job site as an electrician and I'm not trying to be that stupid apprentice that doesn't know anything lol
Thanks homie good looks
Thanks so much, this had me feeling like an idiot lol
Thank 👍
Thank you. I couldn’t figure it out for the life of me. I fee stupid now lol
Thank you 🙏
Thanks
Dude the straps on mine don’t even match sizes
Thanks..I had like a hour trying to do it.. I was like let me UA-cam it lol
Mũ bảo hộ chống tĩnh điện giúp người dùng tránh được nguy cơ cháy nổ do tĩnh điện.
sh*t i put it backwads and it is real hard to undo it. 😢
Whoever designed this needs to have his helmet tested. Who's up first?
Great video, thanks! Thought I was ready for a mental institution, lol
Thanks bro I appreciate it
You're welcome!
Thank you so much
Bro i actually thought i was fucking stupid thanks bro
I still have no clue how the straps go and can't figure this out I feel like I've flipped them all every wich way
EERY FUC#ING TIME I TRY TO PUT THE THIRD ONE ON THE OTHER ONE FUC#ING BURSTS OUT!!! Damn im mad asf rn
Thank you 🙏💪🤘
Me: throws out instruction. I guess I can just put this baby on. Wait I need to insert this!?!??!?!... omgooodness what can I do to fix this problem. :D UA-cam... ahhh
This is when the iQ gets tested lol
Tell me about it!
Bless you.
Thank you
He sounds like Benson from regular Show
Ha! Hopefully that's a compliment! :-)