How to install a wall mount and charger for your dyson hand held vacuum
Вставка
- Опубліковано 5 лют 2025
- Click here amzn.to/476CeZU
How to install a wall mount and charger for your dyson hand held vacuum. The tricky thing is installing the charge cord through the plastic wall mount. It is not very intuitive. Don't screw it to the wall before you insert the cord and charge nipple.
THANK YOU! You explained how to do the install clearly and without a lot of personal banter... some people get caught up in hearing themselves talk rather than cutting to the chase and helping us non-handy people out! BIG THUMBS UP!
I try to get to the point thanks for watching
Definitely the best Dyson wall mount installation instructions on UA-cam. Thank you for sharing with the world!
I appreciate those kind words. Thanks for watching and enjoy your new Dyson.
The best video on how to install a wall mount for Dyson. I gave him 100 out of 100.
thanks and thanks for watching I don't know why they make it so difficult but we did it right!
Everyone said Dyson wall mount and showed how it pierced the wall. You explained in detail how to place the charging cable and charging port 🤩 Thank you very much, exactly the video I was looking for👏.
Glad I could help it’s that very intuitive how you do that it took me a while to figure it out and we didn’t have the explanation in the directions glad I could help again thanks for watching
You are genius. The only person to explain the cable path. Thanks so much
Wow, thanks! Enjoy your Dyson
You have the talent to explain with clarity.
Thank you I appreciate that and good luck on your installation thanks for watching
Thank you for this video-for the life of me, I couldn’t figure out how to fit the charging piece in until you showed to open it first!!
You are welcome! they don't make it easy do they
THANK YOU SO MUCH !! I didn’t know how to take off the cord from that little pary
You're welcome!!
Thank you! There is no way I would have figured that out from the instructions. This video was what I needed!
I know the directions don’t really give you good directions thanks for watching
OMG !!, thank you so much for this video, very well explained. You go right into the the topic, I've been looking for instructions on this installation but none like yours.
Thanks again !
Glad it was helpful!
Great video, followed your instructions, went perfectly. Thank you!!
Glad I could help. Good luck on that install and thanks a lot for watching.
Great video, straight to the point and clearly explained. Thank you 😀
Thanks they don't make it easy
Thanks so much for the detailed video of putting the plug in the dock. I liked how you hung the long bit to the size to use the wall space you have super clear and simple super duper 🥳
Thank you and thanks for the comments I don’t know why Dyson doesn’t give you clear directions in their instructions but this one was a definite puzzle but we got it figured out thanks for watching
@@TomLeeman hi it seems they don’t want to print multiple languages and use icons/Ikea argggg mine also is without a face plate which many had… very confusing 🤣
Lol if it wasn’t for your video I would have never did this. I didn’t know you needed to push the charger so hard up the little nozzle tube for your charger. Thank you
You’re welcome I don’t know why they don’t put in the proper directions for this it’s not very intuitive good luck and thanks for watching
Many thanks for the video. I way scratching my head. From Cyprus
Good luck on your install and thanks for watching
Thank you the best explanation on UA-cam.
You are welcome and thanks for watching
Thank you so much you saved my evening
Glad I could help
So helpful since an otherwise useful product fails to explain clearly what you managed to demonstrate. Cheers!
You're welcome! Thanks for watching!
Awesome video! Question - how did you know how big of a hole to make for the anchors? Sorry if that’s a dumb question, just moved into my first apartment!
I just look for a bit that was about the same size and just kinda like eyeballed it and then use that bit or drill. Thanks for watching.
Thank you! the instructions were really hard to follow!
I know I don’t understand why they don’t make it clear or have a website that you can go to and to figure it out thanks for watching
Great video although I wish someone would discuss how to find a stud in a wall and even making initial hole and what anchors even are 😔
You can buy stud finders cheap on amazon amzn.to/3rqPatP
Big shout out to Dyson for having this in the instructions that came with the vacuum ........NOT ! ! Thanks Tom
I know right why don't they?
My v7 has it.
I second that! No directions and even the website scan was invalid-nice intro to Dyson. My question is for Tom or anyone else. Do the screws need to be drilled into studs or will the dry wall be sufficient enough to hold? It appears drywall. Can you use a hand held screw driver or do you need a drill?
Great video! I couldn’t find one that was clear until I found yours. Thank you!
great video. just fitted my charging dock into garage wall as instructed. Thx.
Glad it helped
Yep, I had it upside down. Makes a lot more sense now 😂
Yeah, that probably wouldn’t work upside down. Good luck on your install.
Thanks for the gr8 detailed video Tom. Do you need to screw into studs or is the drywall sufficient? It appears like the drywall will hold since you didn't mention anything about finding the studs. Since it is just drywall, can you use a hand held screw driver or do you need a drill? That is a good idea to mount it in the laundry room with just the base. The Dyson video show the mount with the entire leg attached to the mount on the wall. That is nice bcuz everything is all together, however, it takes up more space and it's not as easy to mount it next to an outlet in a more confined space like next to a washer or dryer. You could fit the charging base next to an outlet better with only having the base mounted and I guess just store the leg somewhere else.
I had a stud right behind the screws so it went right into the wood which you know really liked it down. Otherwise you could use anchors in the drywall. Good luck. Thanks for watching.
@@TomLeeman Thanks
@@MT-wo5fs my pleasure thanks for watching
Omgosh thank you so much! I totally was going to screw it on the wall and have the cord hang from the side haha
ur welcome thanks for watching
Thank you. I was stuck at this step.
My pleasure they don’t make it easy
All these videos skip the actual drilling and anchor parts and that’s what people need to see
Thanks and thanks for watching. Good luck with your Dyson.
Amazing explanation. Thank you
You are welcome! Thanks for watching
They need a link to this video on the actual Dyson manual because their video was 💩. Thank you sir!
Thanks I appreciate that. Good luck with your Dyson and thanks for watching.
Nice little setup.
Thanks!
Should I use a longer screw or shorter
If you’re going into a 2 x 4 you just need to get about an inch and a half maybe two
Thanks so much for this!
You're so welcome!
Well done, brilliant video, thanks
Thank you too!
Where can I find the red attachment on wall ? And what is it called! I want to buy one.
I just bought that at Home Depot. It was like something that you would hang a rake or a shovel on. They have them on that one aisle. Good luck thanks for watching.
Thanks!!!
I haven’t bought one yet but I’m planning to. I just don’t know where I’m going to put it. How much space does it need to be away from the wall? I’m thinking I could potentially put it behind a door… But I may not have enough space. I’d sure like to know how much space is needed for the Dyson docking station
Once you put the vacuum and it sticks out about it, I would say eight or 9 inches so you gonna need some space
Thanks for your reply… actually I noticed in your video that you mounted your docking station close to your washing machine. And then you hung up the wand beside it. I am going to do exactly that. The only difference is that I will hang up the wand in another location close by. Thanks for your help! This made my life so much easier.
Looking for some advice:
With a wireless vacuum, would you install the mount high enough for the vacuum to be resting solely on the mount, or would it be best to have the base of the vacuum resting on the floor to take some of the weight off the mount? My bf just installed our mount but it's high up enough the vacuum isn't touching the ground and all its weight relies on the mount. I am pretty nervous about it falling because I have a cat. I have been watching countless videos and searching Google but haven't found an answer yet. Is there anyone who could give some advice, or suggest an additional way to secure it as I'm not sure if this mount required double sided tape and if so-I would assume it can't be re-mounted with out it...
If you screwed it into a stud or a 2 x 4 in your wall it’ll be fine we made additional hook to hold our long, vacuum wand and head but you can do it the way you did it you just Gotta make sure that it is firmly attached to the wall Good luck thanks for watching.
Thank you for the video. What screws do you recommend to use?
I think I used drywall screws
Thank you from France 👌🏽
Welcome! thanks for watching!
Thank you for the great instructions!!
You are so welcome!
Yeah the actual drilling of the holes and what to use and what is an anchor, etc...is what is needed
I used drywall screws had studs
@@TomLeeman Thank you. What size/kind drywall screws and how big drill bit?
Thank you very much for this video ! 👍👍👍
You are welcome!
The light on my one doesn't come on. When it's in the charger.
Sounds like it may not be charging. You have to make sure that the contact goes inside of the charging port on the Dyson. It may not be getting in there or it may not be plugged in properly. Good luck thank you for watching.
Can I set up this dock on a wood closet? Do I still need anchors for it?
You’re screwed directly in the world you should be fine you’re really don’t need to anchors if you do that
@@TomLeeman it worked, thank you
you are a gem. thank you.
Glad I could help. Enjoy your Dyson.
Thank you for this video!
You are so welcome!
Mine was nice and secure for months until it got very lose I used bigger plugs and still no good.... please help 😬
You may need some drywall anchors which are the big steel ones that expand behind or get a stud finder and screw it into a stud that’ll never come off good luck thanks for watching
Do you need to put in studs only?
It needs to be fastened securely because the vacuum weighs a lot it all depends on the board and your anchors good luck thanks for watching
Thanks Tom, great video.. My V-8 came with studs (as you used) and screws. Is it really necessary to use the studs if I am screwing into a stud? Thanks in advance.
If you’re screwing it directly in the wood it should hold and you shouldn’t need the anchors good luck and enjoy your Dyson thanks for watching
Where did you buy your wall anchor (red) from? I need this for some of the other components. Great video!
You can get them at Home Depot or Walmart
Lost the screws in my move and I don't want to take the mount to the hardware store. What size screws did you use? All my inventory screws are too fat.
I used drywall screws inch and a half maybe
I wish this showed the anchor installation ☹️
To install the anchors I just need to drill the holes and then place the plastic anchor in and then screw in your screws. You can use a template such as a piece of paper on the back of the unit and mark where the holes are supposed to go and then put it on the wall or you can just try to find some studs and screw in some drywall screws. You may need a stud finder to do that. Good luck. Thanks for watching.
@@TomLeeman maybe a dumb Q but did you use the screws that came with the anchors or a bigger screw/drill bit? I tried drilling with the screws first but couldn't get the anchor in after. Tysm for responding!
Is it just me, or are the mounting screws that come with the V8 way too long? Like, dangerously long? I'm afraid I'm going to hit a wire or a water pipe or something!
If you can find us wooden stud in the wall, you should be OK. I have a special stud finder that tells me if there’s wood or metal. Good luck. Thank you for watching.
|😊 Dyson supersize doesn’t fit in hanger. Battery a bit too big
When you buy it, it should come with its own cradle and hanger. Good luck thanks for watching.
You skipped the most important part about installing it on the wall. What size bit did you use for the supplied wall anchors?
Sorry have to make an additional video
I watched this in hopes of doing reverse engineering. I have to take an old one off the wall, one that came with this house. Trouble is, there are nuts in the recessed place where the screws should be. I am clueless as to why AND how to remove them!
Need a ratchet if they’re nuts
Thanks for the video. Do you recall if the screws were provided with the vacuum?
I don’t remember to tell you the truth but I do know I use my own
I just got a Dyson and got no screws with mine , surely they should give you the right screws??
Sadly no anchors, no screws & no instruction / recommendation about the wall mount installation :/
@@MihalsSapovalovs Hi! I truly thought mine came without screws and anchors!!! Until recently I found that they are taped to the back of the wall mount! I don’t know how the baggie camouflaged into it 😅😅 double check your screws aren’t inside a little bag taped to the back of the grey wall anchor!! I hope yours were included!!
Does it have to be in the stud ?
not really but the stud holds better
Were screws/rawlplugs included for you guys? I couldn't find them.
I just use screws that I have in the garage and tried to find a stud good luck thanks for watching
hi, does it come with 2 chargers in case you want to use the wall charger or charge it away from the wall mount? if only one charger and you do the wall mount sounds like you are always stuck using the wall mount since you can't remove the charger cord once mount is screwed into the wall.
No only one charger unfortunately
Mine was screws missing. Called Dyson but sent me much smaller screws. Did you buy screws sperately?
I used screws and anchors that I had not the ones that came with
thank you very much for this video.
Ur r welcome it was a little tricky but doable
Thank you. You saved a marriage
Glad I could help
Thank you! :)
You're welcome!
Thank you very much
You’re welcome enjoy your Dyson
I installed the wall mount for my Dyson V11 Torque Drive vacuum using just the screws and not the anchors. However, there is no stud behind the wall and while I am able to mount the canister and a small tool, the top of the mount is just a tad away from the wall. I am concerned about whether this will hold. Has anyone else installed a wall mount without the anchors/stud and was the wall mount able to adhere to the wall and not break away?
Usually best to use some type of anchor
Thank you so much!!!
You’re welcome I don’t know why they make it so hard Good luck and thanks for watching
What size screws did you use?
I just used some short drywall screws I had lying around
@@TomLeeman So did I and its all up and running now. Thank you!!
What size drill did you use? What mm?
Awesome - cheers mate!
Thank you! Cheers!
Thank you. I was looking to buy this exact wall mount from eBay. Do you know if this will fit with my DC34? The eBay listing doesn't include my DC34 model in the compatibility list, but the DC34 looks almost the exact same as the V6 V7 V8.
check the measurement on the port for charging
Thanks Tom!
You bet!
Easy to fit the plug, nightmare to get it back out!
Yeah it does stick a little bit doesn’t it thanks for watching
@@TomLeeman Just found out how to get the plug out, its actually quite easy... ua-cam.com/video/Q3Zza9kb68M/v-deo.html&ab_channel=AskDyson
So- am I the only one who is concerned about it reaching full battery but it’s still plugged in?! I was about to mount the wall hanger-but of course this thought came to mind. I just prefer that I disconnect the charger from the vacuum once it’s reached full charge. I’m guessing I can just pop out the charger head once I see it’s reached full battery? Anyone do this? Or ???
Great video by the way! To the point!
we just leave it in all the time
I have a v8 model with no screws or anchors. Do you know what size to use? Thanks.
I used screws I had but if you can find the stud in the wall it should hold the weight I use drywall screws sometimes to screw right into the stud if not anchors
What a legend
thanks for watching
Thanks!
Welcome!
thank you so much ;)
You're welcome!
Thank you!
You're welcome!
Done!
excellent!
Sorry to point this out but you have installed it the wrong way around. The cups at the end go on top to store attachments.
The attachments clip in
Dyson !! If i knew i have to screw by myself station to the wall i will buy other model of vacuum!! Big NO ! And no parts inside as well to do this !
I had some anchors and drywall screws it’s not that hard the tough part was figuring out where to put the cord thanks for watching
That must be the cheapest stand very little money can . What a fail
it works
Thank you!
You're welcome!😎🤙