I think electricity line should be prepared first, and the colour of the ceiling could be painted first on the ground. We see excellent skill in this video.
Such a great job.. But I'm kinda confused by how the electrician is gonna fish wires from concrete slab. it seems like you covered it all up and didnt see hanging wires that can be grabbed from the holes on the gypsum.
kalau kaya gitu cecek ,apider,capung pd betah kl ay mau ngerubah biar dirapatkan bisa g om itu sgt bgs tp kl dikamoungkua buat sarang tawon mkn nyaman kl sy mau moddel ini dirapatkan biar seranggak g od sembunyi
good job You mount the moldings to the plasterboard with some type of special tips, or they are the basic tips that are used to nail the tight covers of a door frame to the guides.
can you please tell me the size of that room ? i want to make similar design but i'm worried about the room space being too small for such design. Thanks in advanced 🙏
@@constructiontech2411 Nail gun? You got it all wrong 🤣. That's what I use to shoot down the track to the floor and ceiling. Screw gun screws in screws
Wires are usually hanging in place any ceiling Ive done and they fish them out after. Didn't see any hanging b4 they put this ceiling up. "Right lads boards off again"
@@gojo6252, I think they didn't read your whole comment or just doesn't speak English so they translated your first sentence and thought you were complementing them :) By the way I don't think getting visa to USA is easy so try doing yourself a bit practice and you can do it easly.
Can it be done without fixing a board on the concrete. I mean plastering and painting the middle and fixing the boards on the sides to create the same look?
I have question how are you guys doing this so easily? My arm gets really fatigued when holding the plaster board. I can never do this job properly, I always mess up
@@constructiontech2411 thank you for your reply but how? They are already sealed where do you run the wires? I am planning to make my DIY ceiling like this,
Boss may okay ba gamitin ang gypsum board pag gawa ng cove ceiling? Tingin ko kasi mas okay kasi di na kailangang mag grinder ng rebit pag ginamit ang hardiflex. Ang gypsum kasi black screw at medyo na lubog na ang ulo ng screw. Tama ba boss?
Hello I live in New York. Do you work in New York!!! I am willing to do a renovation in my home with your help please. Thank you. How can I get in contact with you??
I didn’t know they were out of USA but Thank you so much.
thank you
I think electricity line should be prepared first, and the colour of the ceiling could be painted first on the ground. We see excellent skill in this video.
thank you very much
Yes that’s true
Only skilled people can do this work, the results are very beautiful 👍👍👍❤️
thank you very much
Such a great job.. But I'm kinda confused by how the electrician is gonna fish wires from concrete slab. it seems like you covered it all up and didnt see hanging wires that can be grabbed from the holes on the gypsum.
Hi - the electrician will run a flexible plastic tube and wire to each light location.
The quality of this video is fantastic.
Great job guys... from Kenyan gypsum designer
Thank you for watching the video💕💕💕
kalau kaya gitu cecek ,apider,capung pd betah kl ay mau ngerubah biar dirapatkan bisa g om itu sgt bgs tp kl dikamoungkua buat sarang tawon mkn nyaman kl sy mau moddel ini dirapatkan biar seranggak g od sembunyi
thank you for sharing
You are a genius!
Thank you 🌺❤️
good job
You mount the moldings to the plasterboard with some type of special tips, or they are the basic tips that are used to nail the tight covers of a door frame to the guides.
Thank you for watching and supporting the video
Light Laga karke bhi to aapko dikhana chahie tha na
you are really good workers
thank you for watching the video
Thanks for your detail info sharing .
Hi
They make it look so easy
Thank you for watching the video
can you please tell me the size of that room ? i want to make similar design but i'm worried about the room space being too small for such design. Thanks in advanced 🙏
Hello - this room has dimensions of 3600x3400 mm, sir
Mau tanya lur.. Untuk lis nya pakai lis apa yah.. Kayu apa gibsum
Halo - Plafon ini seluruhnya terbuat dari plester pak
wow, very skilled workers...
Thank you
عمل جميل جداً ❤❤ تحياتي لكم من اليمن 🇾🇪❤❤❤
Thank you ❤️🙏
😂 Is this from the 1970's wires on your screwguns, sweet lord 😅. Battery guns lads
Hello - nail gun, sir
@@constructiontech2411 Nail gun? You got it all wrong 🤣. That's what I use to shoot down the track to the floor and ceiling. Screw gun screws in screws
mantap bos ku. sukses selalu
thank you
Great work, on minute 5:20, what is the measure of the cuts on the drywall? Thanks
Thank you for watching the video
Nice video
Thank you for watching the video🌺🌺❤️
thợ thi công quá chuyên nghiệp
cám ơn bạn đã xem và ủng hộ video
Simply elegant!!
thank you for watching the video
بما ان الواح الجبس لا تتحمل الوزن الثقيل، هل عند استعمال السقف الثاني بهذه الطريقة لايسقط؟ لانه مثبت في السقف الاول
thank you
Gypsum celing kitne sal thik se rahega bhaiya plz bataw
नमस्ते - प्लास्टर की उम्र 20 साल होगी सर
Great job guys. From the UK
Thank you ❤️❤️❤️❤️❤️
research acha kia h bhai ne❤
thank you for watching the video
What are those brackets you installed onto the concrete?
😅mas; mmmmnnmmmmmmmm😅😅
Hello - that is a v-shaped zinc bar used to support plasterboard panels
thank you
How will an electrician fit the lights.
hi - they will run the wires over the light holes and the lights will be connected in series with each other
Wires are usually hanging in place any ceiling Ive done and they fish them out after. Didn't see any hanging b4 they put this ceiling up. "Right lads boards off again"
beautiful job!
Thank you for watching the video
Great job! 👏 If you guys do this as business, I want you to do this job for me and I’m in USA.
thank you for watching the video
You didn’t answer my question
@@gojo6252, I think they didn't read your whole comment or just doesn't speak English so they translated your first sentence and thought you were complementing them :) By the way I don't think getting visa to USA is easy so try doing yourself a bit practice and you can do it easly.
Can it be done without fixing a board on the concrete. I mean plastering and painting the middle and fixing the boards on the sides to create the same look?
So nicely work and so fast
Hi 👋
@@constructiontech2411 hello sir
Very nice good skills 👌👌👌👍👍👍
Hi
Now how to get install the cable for lighting lamp.?
Hello, there is a power source waiting on the concrete ceiling - the electrician just needs to pull the wire and install the light.
tuyệt vời quá
thank you
good job but ,check on those joints some are weak
Thank you for watching the video
Your work is extremely pleasing to the eyes…. Excellent craftsmanship right there.👏👏👏🥂🫶🏿🤝🤝👍👍✅✅✅🤝🤝🤝🤝🦾🦾👊🏿👊🏿🍺👍🤝🏆
thank you very much
My ceilings are thin how do you attach rails if there like this ?
Hello - these workers only tried to fix 50mm long screws on a ceiling with a thickness of about 80 - 100mm to be able to do it like this.
Oh yes 👍 brother
Am doing this skills now. 22:02
But i really need support from you sir. Please 🙏 mass Allah 🤲 brother
thank you for watching the video
whats that tape you used?
?
Hi - it's a mesh tape used to cover scratches - dear
good job... but i prefer without molding.... look it more simple
Thank you very much🙏
I have question how are you guys doing this so easily?
My arm gets really fatigued when holding the plaster board. I can never do this job properly, I always mess up
thank you for watching the video
Good job 💯👍👍
Thank you very much
Should i go for gypsum or pop
thank you
This is dope...
thank you for watching the video
Did u use pop or wooden beading at the centre?
Thank you 🙏
Well done
Thank you for watching the video
I'm interested, from Nigeria
thank you for watching the video
Baru sebulan pakai udh roboh ini mah dmn letak kekuatanya
thank you for watching the video
Gypsum board ke upar kya apply kiya hai??? Kis cheez ka coating kiya jata hai???
Hello - plasterboard is made from gypsum powder and small mesh fibers - after completion it will be covered with a layer of paint to protect
Excellent job
Thank you for watching the video🙏
Good
Where did you buy crown Moulding?
Hello - we import these molds from China, sir
10x10 fut room price same design please reply
4000 USD sir
Can you comment with list of material we need for completely job thank you
Hello - materials include zinc bars and screws to make hangers - plasterboard and decorative bars
عمل جميل رائع جدا ❤❤
Thank you for watching the video
Mmman
😮
May I know how wide the wall angel is?
Hello - you want to ask the width of the 2nd ceiling level, right?
How can you install the lights?? And switch where you gonna insert the wires?
Hello - the lights will be connected in series with one or two switches
@@constructiontech2411 thank you for your reply but how? They are already sealed where do you run the wires? I am planning to make my DIY ceiling like this,
Super excellent
Thank you for watching the video
S'il-vous-plaît, le produit que vous appliquez diffère du mastic ?
Bonjour - ce produit est moulé à partir de poudre de plâtre
God jobs
Thank you for watching the video
Alat untuk pasang lis itu necis tembak y
thank you
Hello my friend. What is the width of the side drop ceiling?
Hello - 600mm sir
Beautiful❤❤❤❤
Thank you very much❤️❤️💕💕🙏🙏🙏
Очен красивая
thank you for watching the video
بالتوفيق والنجاح الداءم دعم واشتراك 🎉
hi
@@constructiontech2411 Welcome
Very focus noninterupted.
thank you for watching the video
هذا عمل جميل ورائع جدا
Fan ke liye bich me hole karna padega kya ?? Uska wiring kaise hoga??
नमस्ते - यह शयनकक्ष है, हम कमरे के बीच में पंखा नहीं लगाएंगे लेकिन ठंडा करने के लिए एयर कंडीशनिंग का उपयोग करेंगे
Wahhh....
عمل جميل ورائع جدا
thank you
What is the size of room ??
Good job
What's the name of that yellow aluminum you screw on the wall ?
Hello - those are thin zinc bars used to hang plasterboard
baklas uli, ala pa wiring for lightings...
thank you for watching the video
Vii ek 11×12 ghar me gypsem board ki ceiling karne ka kitni price ayega
good job
Thank you 🙏🌺🌺🌺🌺🌺
what are the materials u use?
Thank you for watching the video
Inih dimana sayah mau pasang
thank you
Welcome. good job. Where are you from
Thank you for watching the video
Very nice
Thank you
Room ka height kya h???
नमस्ते - कमरे की ऊंचाई 3800 है
@@constructiontech2411 inch, meter, feet ???
Do you work in Kolkata, India ?
no sir
Be ready for termites on gypsum
thank you for watching the video
Boss may okay ba gamitin ang gypsum board pag gawa ng cove ceiling? Tingin ko kasi mas okay kasi di na kailangang mag grinder ng rebit pag ginamit ang hardiflex. Ang gypsum kasi black screw at medyo na lubog na ang ulo ng screw. Tama ba boss?
right - sir
Is hardiflex same as gypsum board? I tot itbis a fiber cement board?
Can you training me this work
Thank you for watching the video
NICE AND GOOD
Thank you for watching the video
🎉🎉🎉🎉🎉
Thank you for watching the video
musiknya sangat mengganggu, biarkan dengan suara aslinya
Terima kasih atas komentar Anda
I think Room size is 12x15
Hello - the room size is 3650 x 3800 mm, sir
Hello I live in New York. Do you work in New York!!!
I am willing to do a renovation in my home with your help please. Thank you. How can I get in contact with you??
Hello - we are from Vietnam - thank you for watching the video
You forgot downlighters electrical wiring
Thank you - the electrician will wire and install light bulbs after the house is completed and put into use
👍
Thank you for watching the video
Kha se ho bro states name
thank you for watching the video
Kitna kharcha aayega 10/12 me
Halo - total biaya plafon plester ini adalah 700 USD
Prices?
Hi - the cost for this room made in Vietnam is 400 USD
Which country are you located?
Hello - we are from Vietnam
How to put the light bulb
Hello - the electrician will wire the bulbs in series and install the bulbs into the drilled holes
Dimension plz
thank you
I want learn well it.
thank you for watching the video
Good jop
Thank you for watching the video❤️❤️🙏
❤❤❤❤
Thank you
Price ??