Hi Ken, Make sure the shield is properly clamped on the feedback cable to the 2090-K6CK Breakout Board, and refer to the Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual, Publication 2094-UM002 for error code details: literature.rockwellautomation.com/idc/groups/literature/documents/um/2094-um002_-en-p.pdf If you continue experiencing a fault or have further questions, please reach out to your local Rockwell Automation distributor for personalized support.
Hello, There are approximately 30 unique errors that can occur for a variety of reasons, as well as unique feedback configurations. The troubleshooting instructions on pages 197-218 of the Kinetix 6200 and 6500 user manual may help you narrow down what your specific error refers to: literature.rockwellautomation.com/idc/groups/literature/documents/um/2094-um002_-en-p.pdf This TechNote also discusses a fault on a Kinetix Drive: rockwellautomation.custhelp.com/app/answers/detail/a_id/507437 If you have any further questions or concerns, please reach out to your local Rockwell Automation distributor for assistance. Thank you.
@@harichandrcidubeyllpl7518 Hello, Fault E07 is a motor feedback fault. It is important that the wires are landed properly in the terminal, not loose or shorted. Also verify that the wiring is for the proper type of encoder that is on the motor. A hookup test through Studio 5000 can be ran and may fix this issue. If you have further questions or concerns, please reach out to your local Rockwell Automation distributor for personalized support. locator.rockwellautomation.com/
Flt M04
I follow as manual all but fault again. how to fix?
Hi Ken,
Make sure the shield is properly clamped on the feedback cable to the 2090-K6CK Breakout Board, and refer to the Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual, Publication 2094-UM002 for error code details:
literature.rockwellautomation.com/idc/groups/literature/documents/um/2094-um002_-en-p.pdf
If you continue experiencing a fault or have further questions, please reach out to your local Rockwell Automation distributor for personalized support.
what's the reason for the feedback error in kinetix 6500 servo motor drives ?
Hello, There are approximately 30 unique errors that can occur for a variety of reasons, as well as unique feedback configurations. The troubleshooting instructions on pages 197-218 of the Kinetix 6200 and 6500 user manual may help you narrow down what your specific error refers to: literature.rockwellautomation.com/idc/groups/literature/documents/um/2094-um002_-en-p.pdf
This TechNote also discusses a fault on a Kinetix Drive: rockwellautomation.custhelp.com/app/answers/detail/a_id/507437
If you have any further questions or concerns, please reach out to your local Rockwell Automation distributor for assistance. Thank you.
How to check it
As per your instructions we have connected wire but alarm coming E07
@@harichandrcidubeyllpl7518 Hello, Fault E07 is a motor feedback fault. It is important that the wires are landed properly in the terminal, not loose or shorted. Also verify that the wiring is for the proper type of encoder that is on the motor. A hookup test through Studio 5000 can be ran and may fix this issue. If you have further questions or concerns, please reach out to your local Rockwell Automation distributor for personalized support.
locator.rockwellautomation.com/
@@mcnaughtonmckay ok right I will check confirm with soon