METAL Vauxhall Opel Mokka Handbrake Handle Release Replacement Button Kit Install Instructions Guide

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 23

  • @Budget-Cars-And-Bikes
    @Budget-Cars-And-Bikes 2 роки тому +3

    Perfect solution, watched this video, ordered on-line, arrived next day, and fitted in 1 min! great product guys 😁

  • @paulsaunders6635
    @paulsaunders6635 2 роки тому +2

    Tip: if you are struggling to remove old plastic bits, I found an old syringe needle could be forced gently into the remnant and carefully extracted!
    In my case the bottom horizontal bar of the ‘square’ was in situ still, but the syringe point lifted it upwards but be careful!

  • @samrodian919
    @samrodian919 3 роки тому +2

    Thank you! It looks a far better item than the original OEM one.

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      Hi there, yes we agree! - Georgina, X8R Ltd

  • @SarahCourbetsarahjanemarketing
    @SarahCourbetsarahjanemarketing 2 роки тому

    You show how to take the spring out... but then when we next look there is a spring back in there... if you already have the spring do you need to replace it?

    • @X8RLtdUK
      @X8RLtdUK  2 роки тому +1

      Hi there, sometimes the springs can wear out and not work as well, however you might not have to replace your spring depending on its condition.

  • @zakmountas
    @zakmountas 3 роки тому

    Very helpful, thenk you

  • @scottymillotti
    @scottymillotti 3 роки тому

    I just bought a new one the same as this, the problem i have is some of the old plastic 1 is stuck in the groove.

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      Hi there, we recommend using a metal pick or trim removal tool to pry it out. - Georgina, X8R Ltd

    • @paulsaunders6635
      @paulsaunders6635 2 роки тому

      @@X8RLtdUK I found a syringe needle would penetrate the plastic to enable lifting out!

  • @jayneeex1411
    @jayneeex1411 2 роки тому

    Howwww!? How did yours go in so easily.. mine seema to not want to fit in 🙈

    • @X8RLtdUK
      @X8RLtdUK  2 роки тому

      Hi Jayne, did you manage to get the button in? It can be a little bit fiddly but if the button isn't going in at all it is likely there is parts of the old button still stuck in the mechanism. We found using the pick/small screwdriver really helped getting it in. - Georgina, X8R Ltd

  • @lespodraza6604
    @lespodraza6604 2 роки тому +1

    will this fit crossland x

    • @X8RLtdUK
      @X8RLtdUK  2 роки тому +4

      Hi there,
      Yes, the Crossland and the Mokka have the same handbrake system so this will fit!

  • @juancarlosrogerlopez3564
    @juancarlosrogerlopez3564 8 місяців тому

    Hola cómo pedirlo...???

    • @X8RLtdUK
      @X8RLtdUK  8 місяців тому

      x8r.co.uk/vauxhall-opel-handbrake-button-repair.html

  • @carmelnobes7570
    @carmelnobes7570 3 роки тому

    Where can you buy a replacement?

    • @X8RLtdUK
      @X8RLtdUK  3 роки тому

      x8r.co.uk/vauxhall-opel-mokka-handbrake-button-repair.html

    • @charmaineeaton2327
      @charmaineeaton2327 Рік тому

      Amazon and eBay just type in your model of your car and age and type handbrake button

  • @Sgoburgos
    @Sgoburgos 2 роки тому +2

    The original is a shit! I had to mend it by a clip and loctite.

  • @cikanesa8537
    @cikanesa8537 10 місяців тому

    gde i kako mogu kupiti u srbiji

    • @X8RLtdUK
      @X8RLtdUK  10 місяців тому

      Hi, here is the link to purchase on our website. We ship internationally: x8r.co.uk/vauxhall-opel-handbrake-button-repair.html

  • @orkneyed6528
    @orkneyed6528 9 місяців тому

    My stupid dog chewed mine off.