@@hardskilltallent1655 matibay at malakas ba ang mga produkto ng total kumusta na yang hammer drill mo ngayon gumagana pa ba madali bang uminit ang kanyang motor copper winding ba sya?
@@katherinezamora4880 matibay naman hangang ngayon gamit ko parin normal lang yun init niya. switch lang yun nasira yun low speed to high speed na sira
@@hardskilltallent1655 araw2x mo ba sya ginagamit gaano mo katagal gamitin yang total mo pag nagtratrabaho ka aabot ba sya ng ilang oras bago uminit bakit nasira kaagad yung switch nka isang taon pa yung hammer drill mo ang dali nmn masira meron ba service center ang total?
@@katherinezamora4880 mag 3years na ngayon. yup araw araw ko siya na gagamit my time na 1 to 3 hours ko siya ginagamit. nakontact ko na seller kung pwede sana silang mag sale ng mga parts ng total pero wala daw.
@@กัมฟาตาขาว Makita,Hilti or bosch are mainly good brand but Budget machine brand is Benyu,ingco, Total is good brand but chiseling work is very bad if you are normal hammer drilling use total brand is enough.
Looks cheap ,But does the job ,Good demonstrating, 👍
Amazing.
The chuck does not show any wobbling.
thankyou :)
ทำไมคุณซื้อ2เครื่องครับ
i like thin machine for real
help me so much
Rpm control ??? / Forward and reverse movement ?
there is a forward and reverse. sorry i forgot to show :) thanks for the comment. i'll show next time. :)
@@hardskilltallent1655 Is there a rpm control for the speed trigger?
@@ckh353 yes there is
Your applying too much pressure to the drill when chiseling - light pressure let the drill do the work not you.
sorry sir i just only test if i applying pressure if the drill chuck if not quickly damage.
@@hardskilltallent1655 matibay at malakas ba ang mga produkto ng total kumusta na yang hammer drill mo ngayon gumagana pa ba madali bang uminit ang kanyang motor copper winding ba sya?
@@katherinezamora4880 matibay naman hangang ngayon gamit ko parin normal lang yun init niya. switch lang yun nasira yun low speed to high speed na sira
@@hardskilltallent1655 araw2x mo ba sya ginagamit gaano mo katagal gamitin yang total mo pag nagtratrabaho ka aabot ba sya ng ilang oras bago uminit bakit nasira kaagad yung switch nka isang taon pa yung hammer drill mo ang dali nmn masira meron ba service center ang total?
@@katherinezamora4880 mag 3years na ngayon. yup araw araw ko siya na gagamit my time na 1 to 3 hours ko siya ginagamit. nakontact ko na seller kung pwede sana silang mag sale ng mga parts ng total pero wala daw.
Buen video
thankyou..
650watt
Or
850watt
800watts sir
@@hardskilltallent1655
Thank you
Rate
It is total rubbish for chiseling from my experience
The oil seal went it it start leaking oil in two days.. bosh and dewalt is good
Total rubbish😠
@@กัมฟาตาขาว Makita,Hilti or bosch are mainly good brand but Budget machine brand is Benyu,ingco,
Total is good brand but chiseling work is very bad if you are normal hammer drilling use total brand is enough.