How To Add a Rim Lock to Your Adventure & Dual Sport Motorcycle
Вставка
- Опубліковано 2 жов 2024
- Many dual sport and adventure motorcycles don't come equipped with rim locks from the factory, but adding one to your bike can have many benefits and offer piece of mind while riding. Rim locks help ensure the tire doesn't spin on the wheel by pinching the rim and tire together. In this video Charles gives a closer look at the benefits of adding a rim lock to your motorcycle and how to properly install one on your dual sport and adv motorcycles.
Shop Now | How To Install a Motorcycle Rim Lock
www.rockymount...
Check out www.rockymount... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM... - Навчання та стиль
You should put the rim strap over the rim lock as shown unless you have a rim strap which has an extra hole at the right place for the rim lock. Some advocate using duct tape or the tape which comes with TuBliss. Tape goes under the rim lock.
Wheel weight set screws need to clamp on the spoke nipple. A set screw gripping the spoke will create a dimple where your spoke will break when sufficiently stressed. We all break a spoke eventually, there is no point in doing it sooner than later.
Factory rim locks are almost never installed directly opposite of the valve stem. There is a repeating pattern every 4 spokes and most wheels will be 36 spokes. The valve stem is located between 2 spokes angled away from each other, this repeats every 4, half way around is 18 where the spokes cross each other making it harder to put a wrench on the rim lock.
Another comment made a good point: Put the rim lock 4 spokes either side of the valve stem. This way you only have to treat one side of the wheel special when putting the tire on/off. If you are going to balance the wheel anyway then "Wo what? Its no more than 1/2 oz." But if you were to install 2 rim locks this is what you would do, the first (4) spokes from the valve stem, the next (16) spokes around, and then the valve stem is another (16) spokes continuing around the wheel.
The method of mounting the tire, mostly skipped, works but is not my favorite. Go find the TuBliss installation video. Basically put the innertube in your tire. Spread the tire beads at the valve stem then insert the entire wheel into the tire over the valve stem. So now the entire wheel is floating inside the tire with tire beads outside but you have the dreaded valve stem threaded through the rim. Now you lever the bead over the rim from one side, then flip the wheel and lever the bead over the other rim rather than putting both beads over from the same side. This way you don't have to pull the tire over the rim lock then place the bead between the rim lock and far rim. And makes things a million times easier if installing 2 rim locks.
Very helpful, thank you!
very helpful comment, thanks for sharing!
love it how they cut the part where the actual tire goes over the rim xD then you know that was a hard time
I’m here to remind you to use safety glasses. I just had a tire iron pop out and hit me in the right eye. It was painful!
Ouch!
@ The 3:58 mark in the video, you are showing the rubber band liner OVER the Rim Lock. Is this the way you leave it? You don't poke the Rim Lock stem through the rubber band?
Yes the rim strip goes over the rim lock
Place the lock 1dm / 4 inches(?) to either side of the valve-stem instead. Makes it a ton easier when changing tires!!!
So you ad the weights were the heavy spot is? Poor explanation of how to balance a tire!
What do I do if the biggest rim lock a 2.50 will not fit my rim, it’s to small, have a wide tire on bike
I need to add a rim lock & need some help. My rim is 2.16" so i need the 2.15" rim lock.
Is best place to put it on the value side? 1st big gap 4 spokes away that would help with balancing, which will be Hard its ab bike hub motor so there's a Natural binding + a big cable so i will have to "try" to ballance on the bike
Best place for an easier balance would be across from the valve stem.
Keep 'em coming guys
These are great
How to know what size locks I need?
Depends on how thick your wheel is
Am I better off relocating the rim lock to the other side on a KTM450SXF for dualsport? thanks
Soooo, where can we find a wider rim lock? biggest option I can find is only 2.5" I need a 4.5"
A rim lock threw my balance out, bad enough I couldn’t go over 80km/hr without severe wheel hop. I had to remove it for this reason. My wheel was never balanced after the install, it should have been.
If you don't mind adding wheel weights to your rims check out the No-Mar Spoke wheel weights: www.rockymountainatvmc.com/tires-and-wheels/no-mar-spoke-wheel-weight-p
I got my first bike in 22 and it did not have rim lock nor had I ever heard of it.
In less than a year my rear valve stem ripped off twice while riding on the freeway at 80mph
I wish I had known this earlier
Thank you for this. Isn't there something made to place inside the rim under the valve to balance the weight of the rim lock?
i dont mean to be off topic but does anybody know a tool to get back into an instagram account?
I stupidly forgot the account password. I love any assistance you can give me.
@Layton Franco instablaster =)
@Gerardo Romeo Thanks for your reply. I got to the site on google and im in the hacking process now.
Seems to take a while so I will get back to you later with my results.
@Gerardo Romeo it worked and I now got access to my account again. Im so happy:D
Thank you so much you really help me out !
@Layton Franco Happy to help xD
Okay so can you guys help with a gs300l i wana convert to spoked rims but keep the drum breaks on both front and back rims? I belive you have the right sizes i need?
Dropped the ball on the 1 yard line with that editing.
Is the 2.50 the size for my 03 klr650. Stock rear wheel.
I have a 2016 Africa Twin in my arsenal. I see that a rim lock is available for the front- 2.15, but nothing for the rear - 4.00. Any suggestions?
You should be running the rear tire on that AT at 36-41 psi, so no rim lock required. Rim locks are good for low pressures like around 15 psi or less.
ya got a f air few weights on that wheel.
U don’t need to balance your wheels .. they ride fine without it .. unless u a perfectionist
Depends on your gearing, speed and weight of rider and luggage. Many factors.
Africa twin 1000 and 1100 4" rim
Hi, im new into dirt bikes. I would like to install a rim lock in my front and rear tire. How do i know exactly which rim lock i need, i see different measures. my rear tire is 120-80-18
There should be a stamp marked on the side of your rim indicating the rim size. Example: 18 x 2.15 in which case you would use a 2.15" rim lock. Hope that helps!
Did you put the rubber strip over the rim lock ?
That is correct.
Rim Lock is ONLY needed if you plan to run 15psi or less!!......which is for off-roading pressures..... If you're running on the street, generally you run 20psi or More.....so no need for Rim Lock, as there's really No risk of ripping a rube....... Generally it's a good rule of thumb to run a Lock anyways, just in case you're riding down the road and see a nice Trail, and decide to check it out, and if the terrain gets rough, at least you can air-down to take full advantage, also if the trail starts to get Bad and you're at risk of getting stuck, at least you can air down for increased traction!
Nope. I've sheared two valve stems at 25 and 30 psi on my drz400