Fixing 95 Bronco On/Off Throttle Vibration
Вставка
- Опубліковано 28 сер 2024
- Eliminating pinion axial play, and fixing oil pump bracket BW1356.
Follow me on social media: / scrapmetalmade
/ scrapmetalmade
/ scrapmetalmade
In this video I demonstrate how I fixed the on/off throttle response vibration in my bronco. I also upgrade the oil pump bracket so that it is not prone to eat through the case.
Archived Forum Guide: web.archive.org...
Detroit Locker Manual:
www.eaton.com/...
Screen reader support enabled.To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash
Good Driveshaft Angle Video:
• Fixing Pinion Angle Pr...
Shims used for inside the case:
www.moparparts...
I ended up getting them on ebay as new old stock, I image they will only get harder to find in the future so I will provide the dimensions: ID 1.391", OD 1.752"
Shims used between the rear half of the case and the extension housing:
www.rockauto.c...
Music:
Intro/Outro
Track: Elektronomia - Sky High [NCS Release]
Music provided by NoCopyrightSounds
Watch: • Elektronomia - Sky Hig...
Free Download / Stream: ncs.io/skyhigh
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library • Adventures - A Himitsu...
Warm Nights by LAKEY INSPIRED / warm-nights
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
"Joakim Karud - Rock Angel" Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
Music provided by BreakingCopyright: • Video
Me 2 (Feat. Julian Avila) by LAKEY INSPIRED / lakeyinspired
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
creativecommons....
Music promoted by Audio Library • Video
Nice video, my 94 have a same issue , vibrate @ 65 - 70 miles
Thanks for the video , you may think to add "pump rub" to your description to help get more views
Excellent and very detailed video. I was wondering if you have an m5r2 or a zf5 and if you could possibly take a photo of the 4x4 shift linkage on the transmission. I am in the middle of a manual swap and am struggling to assemble this part
I thinks 🤔 I have the same issue mines when I step on the gas or accelerate..her a loud Rumble likes it's screaming almost ...can feel the vibration under the driver seat
I had the same issue, it turned out to be loose pinion flange nut.
After you tightened it, did the vibration completely go away?
Great video. I rebuilt my 1356 several months back and as much as I read up on the rebuild process I never heard or seen the mopar shim being added to the output shaft.
I did a quick google search and cant seem to find them, where did you buy your shims from?
I lucked out and found a NOS kit on ebay, just searched and the seller no longer has them. The mopar part link is in the description but they don't stock them anymore either, that is why I measured them so if someone needed them they could try and source them by size. Good luck, they were definitely hard to find.
@@scrapmetalmade Thanks for the reply. I found some but they arent a mopar part i think its aftermarket but should work just the same. www.allstategear.com/NP203-Shim-Kit-p/15128.htm
@gregory9740 did those shims work for you?
@@felipeguerrero727 I bought the shims and I have another transfer case in my storage ready to be rebuilt but I haven't had the time to do so right now, but once I do I'll try to remember to update this post.
how many miles at this repair? Stretched chain, but pump arm wear doesn't look too bad
No longer have the bronco.
Can you shoot me a reply on where you got your snap ring pliers for the external snap rings when the holes.. having trouble finding anything strong enough in my area.
I got my set on amazon: Astro Pneumatic Tool 94221. They are ok, not amazing.
@@scrapmetalmade thanks for getting back, I ended up ordering the knipex 4611 a3 pliers on amazon for $27. Rated up to 100 mm rings, fingers crossed they work well.
@@DruFishing Nice, they look decent