This is the most descriptive instructions i have ever seen! I actually enjoyed watching the video, even though it was an instructional one. Lol. Awesome job!
Thank you for the very helpful walk through of install. I bought one several years back here in the states, I didn't have the large enough slab where I wanted it to go, so didn't get the low price install, just delivery. It seemed a really good deal and didn't want to miss out on the price. It's just been sitting in my backyard, still new like delivered. There were no instructions, just a sped up video some years back, now I don't even see that. I was pretty sure I had mapped out how it likely was intended and it didn't look complex, but it's nice to confirm ahead that you are indeed installing as intended. Thanks again for the video.
You prolly dont give a damn but does anyone know of a tool to log back into an Instagram account?? I stupidly lost my password. I would love any tips you can give me
@Paul Edison Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff now. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
Cost and ease of installation... otherwise it is inferior. Like on the A-frame, you would need metal purlins (hat channel) for support but this is much better since debris will not get trapped at every rib and collect holding moisture. Evergreen needles decompose and create perfect moist/acidic conditions to erode/oxidize that very thin sheet metal in no time, for example. You will never see a metal residential or commercial roof installed with horizontal ribs. Never.
You must check with your local building codes. For my area you need a permit for any structure greater than 10x10. So check with your local town building inspector.
To keep costs low theres some custom cuts you must do for these kits. And many places offer free installation where their site crew does the custom cuts in a matter of minutes.
You can install it on dirt, gravel, pavement, concrete. They have 2 anchoring systems, For Gravel, Pavement they have 30" Re-Bar anchors - For concrete they supply 7" concrete anchors - For more details please feel free to call them at 604-799-8282 High wind locations where it's placed on dirt, gravel people also tend to add a few auger anchors.
@@willahelmpowers4835 You COULD build it on dirt if you don't care about it, but it should never been in direct soil contact. Aggregate is not soil and provides the necessary drainage as well as decoupling from the soil.
Hi Chris - We have 2 anchoring systems, For Gravel, Pavement we have 30" Re-Bar anchors - For concrete we supply 7" concrete anchors - For more details please feel free to call us at 604-799-8282
I was impressed with the full-length panels for the roofing and was ready to buy one of these until I saw how the owners (brothers) can't separate their business from their religion. News flash: Religion is divisive and history demonstrates how it's a bane for humanity, spread by the sword, and costing tens of millions their lives because they would not tow the line. Why do companies not learn that religion should not be mixed with business? Unless religion is your business, that is. Just substitute a religion that is not your own to understand how foolish this is.
Best, clearest, most concise explanation of carport erection seen yet. Excellent job, thank you for sharing. Cheers from Michael. Australia.
This is the most descriptive instructions i have ever seen! I actually enjoyed watching the video, even though it was an instructional one. Lol. Awesome job!
Best video on this project out there. Excellent job!
This video is very easy to follow and understand. Outstanding job explaining the process! Thank you.
Thank you for the very helpful walk through of install.
I bought one several years back here in the states, I didn't have the large enough slab where I wanted it to go, so didn't get the low price install, just delivery. It seemed a really good deal and didn't want to miss out on the price.
It's just been sitting in my backyard, still new like delivered. There were no instructions, just a sped up video some years back, now I don't even see that. I was pretty sure I had mapped out how it likely was intended and it didn't look complex, but it's nice to confirm ahead that you are indeed installing as intended. Thanks again for the video.
You prolly dont give a damn but does anyone know of a tool to log back into an Instagram account??
I stupidly lost my password. I would love any tips you can give me
@Paul Edison Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Paul Edison It did the trick and I finally got access to my account again. I am so happy!
Thank you so much, you saved my ass :D
@Jaiden Musa No problem xD
Great video, gives me confidence to do it myself!
It’s good to see information like that before start assemble the carport
This is a Very great video on explination also learned a couple new things thank you
WOW that’s a good 👍 video wish I had seen this before I installed my carport
Thank you for this video!! Installing my own from another company but I think when we add on we’re gonna go through you!
Very well explain nice clean work looks good
Great video. Just what I needed. Thank you and good job.
You are best instructor thank you very much
I'm placing an order with you guys on Monday. Really excited to put this all together.
Great - We can be reached at 604-799-8282 - Looking forward to your order! - JAW Portable Buildings
Gracias muy bien explicado todo un profesional
That was a great tutorial. New subscriber. 👍🏼
Ready for the set up this wknd
Great job explaining..
Great video!! Thank you
Excellent video 😊
Great video. Thanks
Muchas Felicidades Joven Por Su Canal
So, no butyl tape running lengthwise on overlapping ridges?
Great video on how these car ports get put together. Where are your locations??
Their website, under the videos description, shows directions to addresses in BC and Alberta.
I'm putting up a 24' wide. Do I start the tin center of the 3rd rib?
Thanks for the sharing, i really like your solution
Great !
You’re suppose to level it out and square the Base rail first before standing it up
Do you need insulation under the roof to prevent condensation on your parked car or truck? If so what type? Thanks!
The won't reply. They're too busy worshipping their "lord."
Thanks
one side of the panels edge has a slight flare. Im assuming it is on the down side ?
They won't answer. But you are correct. The top-overlap side doesn't even extend down to the valley.
En donde esta la compañía
Too bad you aren't near Reno, Nevada - my wife and I would like a 40'x20' for our 36' fifth wheel.
Nice !
Philadelphia PA
Nececito un carport para un RV vivo en Moriarty nuevo México USA como puedo contactarme con ustedes
Why is the roof with horizontal instead of vertical? Snow load!!
Cost and ease of installation... otherwise it is inferior. Like on the A-frame, you would need metal purlins (hat channel) for support but this is much better since debris will not get trapped at every rib and collect holding moisture. Evergreen needles decompose and create perfect moist/acidic conditions to erode/oxidize that very thin sheet metal in no time, for example. You will never see a metal residential or commercial roof installed with horizontal ribs. Never.
I ask a few guys that sell them on fb n they don’t know Do I need any permit if it’s built onto of concrete or near my house ?
You must check with your local building codes. For my area you need a permit for any structure greater than 10x10. So check with your local town building inspector.
How much is a kit for a 17×20 car port?
ok so a 17 x 20 with 6' walls giving you 8' inside center for $ 3655 plus taxes
Prices?
Wow to install 24 inches of height on complete d building
Where is your accent from? Sounds like Wisconsin
They're based in Canada. They're not Americans. Pretty presumptuous of you to think UA-cam is all Americans.
Too bad I couldn't get one for Maui, too far away
Yeah, it’s too far of a drive for the mojados.
Do you have a store in Kansas city of Missouri?
There is one in bronough Missouri
Well within my limited skillset except cutting the stud on top.
Simple, I know. But, I pause there...
yeah, I guess you need a cut off wheel for that ... or just take to someone that has the correct mitre saw. You might get buy with a hack saw.
Nice video but wouldn't it be more helpful to pre-cut everything for your customers thank you
To keep costs low theres some custom cuts you must do for these kits. And many places offer free installation where their site crew does the custom cuts in a matter of minutes.
What kind material compact build it on?
You can install it on dirt, gravel, pavement, concrete.
They have 2 anchoring systems, For Gravel, Pavement they have 30" Re-Bar anchors - For concrete they supply 7" concrete anchors - For more details please feel free to call them at 604-799-8282
High wind locations where it's placed on dirt, gravel people also tend to add a few auger anchors.
@@willahelmpowers4835 You COULD build it on dirt if you don't care about it, but it should never been in direct soil contact. Aggregate is not soil and provides the necessary drainage as well as decoupling from the soil.
How many anchors do we install?
Each building has anchor points every 8' . Suggested to anchor at every point
Please the # phone
Me interesa POR favor
Is it so wrong
UP DATE. BUILD SOMETHING.
What is the guage of steel coloumns
14 gauge galvanised
Would you believe if I told you I can install one of these in 22 minutes??
Carlos Vargas no mames
Ya right 22mins. It took this guy 9:25 just to explain how to put it together
Hell yea pass me the blower and let’s go,
@@petemorin2876 22min a day for 22 days
I didn't see any details on anchoring.
Hi Chris - We have 2 anchoring systems, For Gravel, Pavement we have 30" Re-Bar anchors - For concrete we supply 7" concrete anchors - For more details please feel free to call us at 604-799-8282
Could this be anchored to a 4x6 ground contact timber using 6" screw lags?
I was impressed with the full-length panels for the roofing and was ready to buy one of these until I saw how the owners (brothers) can't separate their business from their religion. News flash: Religion is divisive and history demonstrates how it's a bane for humanity, spread by the sword, and costing tens of millions their lives because they would not tow the line. Why do companies not learn that religion should not be mixed with business? Unless religion is your business, that is. Just substitute a religion that is not your own to understand how foolish this is.