Tao/Coolster 125cc ATV Clutch Replacement

Поділитися
Вставка
  • Опубліковано 27 січ 2025

КОМЕНТАРІ • 101

  • @robkeeney642
    @robkeeney642 2 роки тому +1

    Thanks for the video. Bought my 5 year old a x-pro 125 atv. After less than 3 hours on it, the clutch went. I had to wait 2 weeks for the clutch tool to come. So I recommend ordering it with the clutch.

  • @deanhuff123
    @deanhuff123 Рік тому +1

    this was very helpful. I'm going to get a new clutch, gasket & that special socket on order so I have it when we need it.

  • @yaelchavez4282
    @yaelchavez4282 4 роки тому +6

    Where did you get the clutch and whats the size

  • @logiprime
    @logiprime 3 роки тому +2

    Hey do you know how to adjust the clutch? Mines wearing out and needs to be tightened

  • @mayceeyt1751
    @mayceeyt1751 2 роки тому +1

    Not sure if it’s my clutch but it runs and drives After it warms up it starts acting like it’s kicking in and out of gear is that the clutch?

  • @2DaMoonArt
    @2DaMoonArt 2 роки тому

    Thank you.
    Very helpful.
    Add more content please.

  • @kar21ol96
    @kar21ol96 Рік тому

    i’ve seen some clutches have a pin with a spring that you out into the middle the rod that the clutch goes on. Is this on all the clutches?

  • @joshbrekke6374
    @joshbrekke6374 4 роки тому

    One more uga duga did it. I gotta fix one like this for my son he’s had for many years. Thanks for showing how to do it.

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Josh Brekke thanks for watching josh! Too many uga dugas can be dangerous. Just the right amount is perfect!

    • @joshbrekke6374
      @joshbrekke6374 4 роки тому

      Ha ha, exactly! What type of oil is used so I make sure I put the right stuff in?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Josh Brekke 10w-40 make sure it’s suitable for wet clutches. Should say on the bottle. I run yamalube 10w-40 in all my machines

    • @joshbrekke6374
      @joshbrekke6374 4 роки тому

      Ok nice, if and when I buy a new clutch should it be soaked in that oil? If so how long do you recommend?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Josh Brekke that helps longevity of the friction plates. I didn’t personally do it, but highly recommend soaking them overnight

  • @bslmarketing
    @bslmarketing 4 місяці тому

    would this work on the Coleman 125 atv?

  • @offgrid-swinburne
    @offgrid-swinburne 4 місяці тому

    Hi, do you know why after replacing the clutch the back wheels will not move when I push the bike , when I push backwards they turn but forward seemes locked. Everything works fine when driving.

    • @TynkaTyme
      @TynkaTyme  4 місяці тому

      Clutch needs adjusted

    • @offgrid-swinburne
      @offgrid-swinburne 4 місяці тому

      @TynkaTyme I did loosen it all the way , still nothing, is it maybe because it's new or slightly thicker??

  • @billpowell6665
    @billpowell6665 4 роки тому +1

    Thanks for the video. I bought our granddaughters a Coolster 125 four wheeler for Christmas a couple years ago. They rode it a lot. It sat up for five to six months. Battery died, carburetor clogged up so I took it to a Ace Hardware that sells them and got it running. New battery new carburetor. Technician said it wouldn’t shift into gear and they could not / did not want to get into the repair. The 4X4 is like new and well cared for except for setting up all those months. Any idea on what the shifting issue could be. I’m mechanically inclined, and can most likely fix if not to difficult.

  • @chipjohnston2864
    @chipjohnston2864 3 роки тому +3

    Great little video buddy! Strong work! Only question i have is how to adjust that clutch, I had the adjustment screw all the way in. Now with a new clutch in there, do I just back that puppy off a tad? Thank you

    • @TynkaTyme
      @TynkaTyme  3 роки тому +5

      It’s been awhile since I’ve done one, i can’t remember if they’re the same as an old Honda motor or not. Honda’s you turn counter clockwise until you feel tension. Once you feel tension, turn it clockwise 1/8 of a turn and that’s it.
      I would try the Honda method first as these engines are Honda clones, if it doesn’t work, try turning it clockwise till you feel tension, then back off 1/8 of a turn.

  • @tomrhadigan3085
    @tomrhadigan3085 3 роки тому

    A friend of mine just bought a quad for his daughter and it won’t move are these clutches adjustable?

  • @samer504gl
    @samer504gl 4 місяці тому

    I've oil leaking at the stator side
    Can you advise or help please?

    • @TynkaTyme
      @TynkaTyme  4 місяці тому

      Crank seal behind flywheel

  • @midtennprepper6200
    @midtennprepper6200 3 роки тому

    I have a new 2021 tao and the clutch makes a rattling sound when taking off is that normal

  • @MattC78
    @MattC78 8 місяців тому

    I got to have one of those impact screwdrivers. Nice.

  • @mayito8851
    @mayito8851 4 роки тому +1

    I have a 4 wheeler exactly like that one.. but I can't tell in which gear is and won't turn on because is not in neutral. What can I do to fix this issue.. will replacing the clutch fix the issue?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Mayito 88 if the fourwheeler shifts gears ok, just try switching through the gears and try starting it in each one. If it doesn’t start, your problem isn’t because it’s not in neutral. You can also find neutral by rolling the fourwheeler. If the wheels turn freely and you are able to push it without the rear tires skidding, you’re in neutral. If it rolls easily, and still won’t start, you have other issues, like a bad solenoid.

    • @mayito8851
      @mayito8851 4 роки тому

      @@TynkaTyme the 4 wheeler don't shift in any gear and also the tires don't move... I already replaced the electrical.. it was working before...my kid told me he was trying to shift when the 4 wheeler got stock in high throttle. Probably that damage the clutch right? 🤔

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Mayito 88 probably not clutch related. I’d take your clutch cover and clutch off and make sure your shift shaft is moving the shift drum like it should

    • @mayito8851
      @mayito8851 4 роки тому +1

      @@TynkaTyme will do that.. thanks a lot for your help... Hopefully that fix the issue.

  • @ianbatterson2331
    @ianbatterson2331 2 роки тому

    That’s a bad ass screw driver!

  • @tonyhornejr3018
    @tonyhornejr3018 Рік тому

    So me and my wife got m our kids one of these and when you put n it in gear that thing just spins.. Do you think this is the problem with ours too

  • @JAMTOAM
    @JAMTOAM Рік тому

    need size for 125cc cheetah tao 2012 i got ine for free got her running and everything just need a new clutch kr how to adjust it cause it drives also think put and hand shifter

  • @williamconyers9309
    @williamconyers9309 Рік тому

    I bent the locking tabs out and that nut absolutely wont move at all. Any tips

    • @TynkaTyme
      @TynkaTyme  Рік тому

      Using an impact?

    • @williamconyers9309
      @williamconyers9309 Рік тому

      @@TynkaTyme yes! I even tried beating it with the hammer and the damn thing won't budge.

    • @TynkaTyme
      @TynkaTyme  Рік тому +1

      @@williamconyers9309 maybe add some heat

  • @JD-mb4ee
    @JD-mb4ee Рік тому

    Is this a semi or full automatic clutch.

  • @CodyBishop1989
    @CodyBishop1989 3 роки тому

    Is this the same as the RPS 125cc atvs?

  • @richarddrechney1664
    @richarddrechney1664 3 роки тому

    Do you/can you adjust the clutch?

  • @chinmay9420
    @chinmay9420 3 роки тому +1

    Hi
    I bought a new 110cc atv , its reverse is very powerful but it's drive is very weak .
    Can u please help me out😭

    • @charlesvictorrose
      @charlesvictorrose 5 місяців тому

      I'm here for the same reason. Were you able to get things resolved?

    • @tammymarino
      @tammymarino Місяць тому

      Ditto i need answers please 😒

  • @Famtastic005
    @Famtastic005 3 роки тому

    What size clutch tool did you get? I see different sizes on Amazon.

  • @skrrtmeep3594
    @skrrtmeep3594 3 роки тому

    2:25 what’s the name of that arm I need to find one I’ve been looking for months on Amazon I can’t find it anywhere

    • @davestheman1718
      @davestheman1718 3 роки тому

      Did you ever find the name of the arm? I’m looking for one as well. Mine was bent to shit

  • @ryanhodges4203
    @ryanhodges4203 4 роки тому

    Mine starts acting up after ~30 minutes of riding. Symptoms are close to no power in forward gear but reverse always has plenty of power. Problem goes away after cool down. Clutch? I was told could also be rear axle bearings. Idk. Would like to hear your thoughts.

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      I recently had one doing the same thing, reverse was fine, but no power in fwd. replaced the clutch and fixed the issue. Be sure you’re running an oil that is suitable for wet clutch operation. Should say it on the bottle.

  • @srt8rg
    @srt8rg 4 роки тому

    Could this be the problem my won’t drive front and back? Like it turn on but it won’t drive/move.

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Yes, or your output shaft is broken (which is the front sprocket)

  • @michaelpalacios7902
    @michaelpalacios7902 4 роки тому

    Hi, when you installed the new gasket that goes between the case and the cover did you install it dry or with gasket sealant?

    • @TynkaTyme
      @TynkaTyme  4 роки тому

      It’s personal preference, i do mine dry, some people use sealant as well, either way works.

  • @rashawnwhite4834
    @rashawnwhite4834 4 роки тому

    On 2:17 what is that first black leaver u took off I can’t find it help!!!!

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Are u looking for a replacement? Or you can’t find it on your engine?

    • @skrrtmeep3594
      @skrrtmeep3594 3 роки тому

      @@TynkaTyme replacement I need a new one mine bent i can’t find it anywhere

  • @MPSrg
    @MPSrg 4 роки тому

    Thank you for your video .

  • @DmanDanstube
    @DmanDanstube 2 роки тому

    Hey fella, I'm pretty sure I have the same wheeler, does yours have forward and reverse? Also what " tooth " did you need to order

  • @ifa2984
    @ifa2984 4 роки тому

    You nice guy thanks
    Good explain

  • @wendyhandley1315
    @wendyhandley1315 4 роки тому

    We tried to remove clutch like this, however our clutch keeps spinning when using the tool, how do we stop it from spinning to get nut loose?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Wendy Handley use an impact and hold the clutch still with your other hand and the impact will spin it right off as long as you bent the locking tabs out of the nut

  • @Shortbikerblondie
    @Shortbikerblondie 4 роки тому

    Good video 👌👍😀

  • @dari3x374
    @dari3x374 4 роки тому

    My chinese atv has about 700 miles on it and ive never changed that clutch before. should i?

    • @TynkaTyme
      @TynkaTyme  4 роки тому

      If it’s not giving you any problems, i wouldn’t worry about it

    • @dari3x374
      @dari3x374 4 роки тому

      @@TynkaTyme Yeah, It seems to run fine. Accept from the part when i get onto it from a standstill it takes a good 5 seconds to get moving and then gets going. Not sure if that would be related to the problem but that’s something that has been going on with it.

    • @TynkaTyme
      @TynkaTyme  4 роки тому

      @@dari3x374 sounds like clutch is slipping then if it takes it awhile to get going

    • @dari3x374
      @dari3x374 4 роки тому +1

      @@TynkaTyme yep kinda what I thought as well.

  • @skrrtmeep3594
    @skrrtmeep3594 3 роки тому

    What’s the actual name of the arm

  • @happygilmore3499
    @happygilmore3499 4 роки тому

    How many splines was the clutch?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      This was awhile ago, but believe it was 17 tooth

  • @maxboya
    @maxboya 3 роки тому

    What oil did you use?

    • @TynkaTyme
      @TynkaTyme  3 роки тому

      I Always use yamalube 10w-40

  • @1071obr
    @1071obr 3 роки тому

    My son has a 125cc toatoa go kart. It works great in the forward gears but grinds badly in reverse. Would replacing the clutch fix that issue? Very helpful video you made.

    • @braeden10120
      @braeden10120 2 роки тому

      We’ll unfortunately I don’t have my Chrystal ball with me, but if I had to guess I bet ur shift lineage is out of alignment and it’s not fully catching reverse, making it grind

  • @soundsoflife6224
    @soundsoflife6224 4 роки тому

    I had to replace that uga duga lol thanks i think i need one

  • @Cm5-Anthony
    @Cm5-Anthony 4 роки тому

    I have a 125cc 2010 coolster tab and when I turn it on it will go fast for like 10 minutes and when I turn it off and ride it again alter it will barely even move in drive but in reverse it goes fast

  • @2DaMoonArt
    @2DaMoonArt 2 роки тому

    Comment part 2:
    You should do a clutch adjustment video.

  • @oscarvazques7253
    @oscarvazques7253 4 роки тому

    Where can u order a new clutch man ?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Oscar Vazques amazon, eBay, or vmcchineseparts.com

  • @theulrich2005
    @theulrich2005 3 роки тому

    The cluch grinds putting in reverse and downshifting from 3rd

  • @benrhargis
    @benrhargis 4 роки тому

    I put in a new clutch and now the the shift stick won't move and it still acts like it has no power. Any idea what I did wrong?

    • @levirus8190
      @levirus8190 3 роки тому

      Try filling it up with oil? Maybe the clutch was stuck when it is in neutral?

    • @maxboya
      @maxboya 3 роки тому

      Same. Mine has no power front or back

  • @yaelchavez4282
    @yaelchavez4282 4 роки тому

    And how many teeth does it have

  • @eliancastillo726
    @eliancastillo726 4 роки тому

    How many teeth is it so i can know which one to buy for mine. Because ther is 17 and 18 teeth

    • @TynkaTyme
      @TynkaTyme  4 роки тому +2

      You would have to pull your clutch off and count the teeth on the gear that the clutch fits on to find that answer out.

    • @eliancastillo726
      @eliancastillo726 4 роки тому

      Ok thanks

  • @aasghar
    @aasghar 4 роки тому

    Great video - Thank You ! Does anyone know how i could attempt to fix/rebuild the clutch (vs replace) ?
    Also, on my 2nd ATV, what could I do preventative care or maintenance to make it last longer ?

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Ali Asghar clutch assemblies are 20 dollars, so i would just rather put a brand new on than go through the hassle of finding all the parts and tearing the old one apart. Just keep oil changed, air filter clean, and valves in spec.

    • @aasghar
      @aasghar 4 роки тому

      @@TynkaTyme Thank you. My biggest issue is sourcing parts, no as free flowing and quick to be delivered in Toronto, Canada.
      I agree with you though. BTW, Valves in spec ? How (if there is any video you can point me to) ?
      Once again, thanks and keep up the good work ! ... and also, stay safe please :)

    • @TynkaTyme
      @TynkaTyme  4 роки тому +1

      Ali Asghar watch one of my first videos where i do a top end rebuild i think it’s part 3 where i show you how to adjust valves.
      I usually use amazon, eBay, or Vmc Chinese parts.com for all my parts .
      Thanks for watching the videos and subscribing! I’ll keep them coming!

    • @aasghar
      @aasghar 4 роки тому +1

      @@TynkaTyme Thank you Sir.

  • @eljefepallares3663
    @eljefepallares3663 3 роки тому

    Is this for all 125 cc for the Tao Tao

    • @TynkaTyme
      @TynkaTyme  3 роки тому

      Should be all the same unless it has an actual clutch lever at the handlebar it might be a little different