Hello. Thanks. Yes, I do the maintenance of the car. Like oil change, filters and what is needed. I will keep in mind to film that too. Nothing is hard. Its more the balance of cost of tools needed. I do not think there is any reason to have the car serviced other than by yourself if the car has been driven like over 160000 km. You likely will not get the money back when selling.
I use the CFE plus as a daytime running light with automatic activation of the low beam when it gets dark. however, I can then no longer use the high beam. To do this, I have to unplug the CFE plus. The function in which the blue high beam symbol in the DIM lights up in the dark does not work either. My vehicle: XC70 engine year 2012.
Hello. Okay, my high beam works but in ”0” on switch at night when automatic low beam is on, high beam dont stay on. But that is logic. When setting switch to low beam, high beam works as it should. Have you tried different firmwares? I have, I think, 4.05 something. You can also check their sopport page. support.swedesolutions.com
Hi, does it need to be plugged in all the time to get additional functions? or it will program the car to unlock/add functions once it is done then can unplug it from the car? thank you
Hello. Yes, it needs to be connected in order to have the functions. I believe that you can build, with a female obd connector and some wiring a wiring harness to connect on the wires of OBD connector. This way you will have the obd connector free. Note! It might be a conflict if you do this and connect another external device to obd. I am not sure but dont think it would occur.
Hi mate! very nice videos! I do have a question, I can't decide what to buy! I have a 2005 S60 and I'm ok with it but some people say the 2006 s80 it's even better in terms of comfort !! is that true ?! should I buy one ?! I don't like new cars, especially after 2015 way more complicated for maintenance and expensive !! In my S60 I'm doing a lot of service by myself and I'm not really confident of buying S80 after 2006, what's your opinion about this S80 before or after 2006 !?
Hello G.I Joe. The P3 platform is fine to do your own maintenance on. I myself could not do so much and I also dared to go from my S80 2004 P2 platform. However I did and do not regret it. There is only one thing that I can think of that is not so good on my 2012 S80, and that is if I would need to change the ventilation fan behind dash. Otherwise go for it. If you compare the comfort, in my opinion P2 is a bit more sloppy vs P3. P3 has more solid steering, more firm suspension without beimg stiff. Xenon headlight better. have put in big amount of sound insulation and the car is now pretty quiet. More quiet than I could achieve on the Old S80. You will not regret P3 platform. Still easy maintenance and overall a lovely car. Just do it. Me and others upload videos for P3 in regards to repair and adding features. You should also check out Volvosweden. Yuri is a russian guy in Canada doing excellent repair/maintenance videos on UA-cam. Good luck mate.
@@swedemake5571 Yea I know the guy from Canada very informative! I'm not that rich😆 so at the moment I'm happy with S60 but soon or later I'll change it so in my scope is old S80 vs Lexus LS430 🤭because of is very cheap 🤑but if to go for new S80 there are other problems Lexus IS/GS for the price !!🤯🤯 .. As you can see it's not easy 🤣😂ANYWAY APPRECIATE FOR YOUR HELP ILL KEEP IN MIND YOUR RECOMMENDATIONS !! 👍👍👍
Hello Patrick. No, the rear lights were still on. However, the front parking lights did not turn on. As in Sweden to follow legal requirement Its okay to have parking lights AND foglight on. Not just foglight. So I needed to do some additional connections for that. This was some time ago and I sent a suggestion to Swedesolutions to add feature of parking and foglights, and I think they did.
Hello. It looks like they are out of stock. And I have read that another company have bought Swedesolutions. And that they dont follow the agreement in regards to support. So I dont know if they will be available
Merhaba. Üniteyi www.swedesolutions.com adresinden sipariş edebilirsiniz. Wifi versiyonu için 225 euro ücret alıyorlar. nakliye ücretini bilmiyorum ama kontrol ederken web sayfasında bulabilirsiniz. Sanırım bölgeler arasında farklılık gösteriyor. İyi şanslar
ok,thanks. do you also have any information that only the latest cfe device supports the function where you can see boost pressure and others on the screen, or does older models also support it?@@swedemake5571
DIDSBIAK R Hello again. If you are in Europe you can get if from www.swedesolutions.com. Former Volvotech and former V-division. They seems to have changed retail a couple of times.
I have my first Volvo XC70 2006 and I don't understand this Volvo electronic modules. It is so complicated, why all this features aren't able to switch on by VIDA ??? All brands make plug and play solutions but not Volvo.
Hello. I guess that Volvo did put in features in their software with the intension of release it further on. And that it did not occur. Also by that maybe no software is possible through Vida. But that is my guess. This module is really easy to setup. It gives more features on your P2 platform then on P3.
GuillermoXT Thats strange. It should work for you. When you connect it, turn on ignition and look if engine light flashes. Its like an intiation. After about 15 seconds you should be fine
GuillermoXT one more thing. I used another type of CFE on my 2004 S80. And on that one I could connect harness to the stereo wiring harness. Easy to access and easy to connect. There is 4 wires. But on the install guide for this CFE they have connected directly to CEM.
@@swedemake5571 I have the CFE Plus from SwedeSolutions. What is the difference between the installed OBD port and the connection harness? Is it possible to make a installation video especially for the additional harness?
Köpte en cfe ultra till min V70N och blev riktigt missnöjd.. Schyssta funktioner, men jag fick mer problem än nytta av den.. in/utfällning av speglar hamnade ur synk hela tiden, farthållaren slutade fungera osv osv
Det var ju tråkigt. Är inne på tredje bilen med min cfe. Fungerar bra. Däremot så är supporten totalt värdelös. Det var en funktion jag inte hade så jag programmerade en nyare årsmodell och det fungerar finfint. Kan vara värt att prova.
@@swedemake5571 Funktionerna i sig fungerade, men helt plötsligt kunde den t.ex bara fälla ut ena spegeln vid upplåsning. Då blev jag tvungen att rycka ur en säkring och fälla ut ena spegeln innan jag kunde åka någonstans.. Farthållaren kunde funka en resa ibland för att sen inte fungera på vägen hem osv... Tappade intresset helt så jag ska nog sälja vidare modulen bara
Love your videos fella, so good. Really interesting.
Do you do any maintenance? Oil change, filter changes?? Could be interesting.
Hello. Thanks. Yes, I do the maintenance of the car. Like oil change, filters and what is needed. I will keep in mind to film that too. Nothing is hard. Its more the balance of cost of tools needed. I do not think there is any reason to have the car serviced other than by yourself if the car has been driven like over 160000 km. You likely will not get the money back when selling.
Christa you got to change the side lights to LED. Also I changed my front orange running light to LED. Looks crisper.
Thanks Arnold. I will check that.
I use the CFE plus as a daytime running light with automatic activation of the low beam when it gets dark. however, I can then no longer use the high beam. To do this, I have to unplug the CFE plus. The function in which the blue high beam symbol in the DIM lights up in the dark does not work either. My vehicle: XC70 engine year 2012.
Hello. Okay, my high beam works but in ”0” on switch at night when automatic low beam is on, high beam dont stay on. But that is logic. When setting switch to low beam, high beam works as it should. Have you tried different firmwares? I have, I think, 4.05 something. You can also check their sopport page. support.swedesolutions.com
Hi, does it need to be plugged in all the time to get additional functions? or it will program the car to unlock/add functions once it is done then can unplug it from the car? thank you
Hello. Yes, it needs to be connected in order to have the functions. I believe that you can build, with a female obd connector and some wiring a wiring harness to connect on the wires of OBD connector. This way you will have the obd connector free. Note! It might be a conflict if you do this and connect another external device to obd. I am not sure but dont think it would occur.
Hi mate! very nice videos! I do have a question, I can't decide what to buy! I have a 2005 S60 and I'm ok with it but some people say the 2006 s80 it's even better in terms of comfort !! is that true ?! should I buy one ?! I don't like new cars, especially after 2015 way more complicated for maintenance and expensive !! In my S60 I'm doing a lot of service by myself and I'm not really confident of buying S80 after 2006, what's your opinion about this S80 before or after 2006 !?
Hello G.I Joe. The P3 platform is fine to do your own maintenance on. I myself could not do so much and I also dared to go from my S80 2004 P2 platform. However I did and do not regret it. There is only one thing that I can think of that is not so good on my 2012 S80, and that is if I would need to change the ventilation fan behind dash. Otherwise go for it. If you compare the comfort, in my opinion P2 is a bit more sloppy vs P3. P3 has more solid steering, more firm suspension without beimg stiff. Xenon headlight better. have put in big amount of sound insulation and the car is now pretty quiet. More quiet than I could achieve on the Old S80. You will not regret P3 platform. Still easy maintenance and overall a lovely car. Just do it. Me and others upload videos for P3 in regards to repair and adding features. You should also check out Volvosweden. Yuri is a russian guy in Canada doing excellent repair/maintenance videos on UA-cam. Good luck mate.
@@swedemake5571 Yea I know the guy from Canada very informative! I'm not that rich😆 so at the moment I'm happy with S60 but soon or later I'll change it so in my scope is old S80 vs Lexus LS430 🤭because of is very cheap 🤑but if to go for new S80 there are other problems Lexus IS/GS for the price !!🤯🤯 .. As you can see it's not easy 🤣😂ANYWAY APPRECIATE FOR YOUR HELP ILL KEEP IN MIND YOUR RECOMMENDATIONS !! 👍👍👍
Hi, does the rear lights also go on and off depending if its night or day?
Hello simon. The rear light turned on at all times.
Hello. When you enalble the daytime driving light on the fog lights, do the rear lights then turn of also, when active?
Hello Patrick. No, the rear lights were still on. However, the front parking lights did not turn on. As in Sweden to follow legal requirement Its okay to have parking lights AND foglight on. Not just foglight. So I needed to do some additional connections for that. This was some time ago and I sent a suggestion to Swedesolutions to add feature of parking and foglights, and I think they did.
@@swedemake5571 Hi could you guide me on how to get rear light with foglights?
@@sm1nvv Hello. I actually dont remember how I did fully. I believe I powered the rear lights at CEM wiring through a relay that latched by ignition
Does it work for my 2001 Volvo V40?
Hello Dennyyy. It looks like it does not work for your car,
hi where can i get the cfe ultra for my volvo xc90 2014
Hello. It looks like they are out of stock. And I have read that another company have bought Swedesolutions. And that they dont follow the agreement in regards to support. So I dont know if they will be available
hallo uit turkije gonderebilirmi mij hoe prijs plus module CFA sport in 2010 s60 2.0t voertuig naar mijn takacag
Merhaba. Üniteyi www.swedesolutions.com adresinden sipariş edebilirsiniz. Wifi versiyonu için 225 euro ücret alıyorlar. nakliye ücretini bilmiyorum ama kontrol ederken web sayfasında bulabilirsiniz. Sanırım bölgeler arasında farklılık gösteriyor. İyi şanslar
Brace… cannot see your message fully, please try again.
Does it still work on your car ? even when owner of the CFE dissappeard and stopped support ?
Hello. Yes it still works. Its not connected to internet. But I will try to make changes with the software to see if there are any issues
ok,thanks. do you also have any information that only the latest cfe device supports the function where you can see boost pressure and others on the screen, or does older models also support it?@@swedemake5571
На 2008 год подойдет на s80 ?
Привет. Да, это сработает. У нас такая же платформа, P3. Вы можете проверить функции на веб-странице Swedesolutions, указав свой VIN. Удачи.
@@swedemake5571 спасибо друг , тоже очень люблю volvo ! Подписался снимай видео 👍
where can i purchase this extender?
DIDSBIAK R Hello. If you are in North America you can purchase the CFE from www.vivaperformance.com/canbus-function-extender-cfe-obd2/
DIDSBIAK R Hello again. If you are in Europe you can get if from www.swedesolutions.com. Former Volvotech and former V-division. They seems to have changed retail a couple of times.
Hi. I have volvo s60 2013 and i'm asking about car bus yo update my car as i have mutlimedia screen
Hello Mohamed. I dont understand. Do you need to update your multimedia?
I have my first Volvo XC70 2006 and I don't understand this Volvo electronic modules. It is so complicated, why all this features aren't able to switch on by VIDA ??? All brands make plug and play solutions but not Volvo.
Hello. I guess that Volvo did put in features in their software with the intension of release it further on. And that it did not occur. Also by that maybe no software is possible through Vida. But that is my guess. This module is really easy to setup. It gives more features on your P2 platform then on P3.
Türkiye ye gönderim yaparmisiniz banada lazım 2010 S60 2.0 t
Merhaba. Ben anlamıyorum
Does not work with my S60 2004 pre facelift
GuillermoXT Thats strange. It should work for you. When you connect it, turn on ignition and look if engine light flashes. Its like an intiation. After about 15 seconds you should be fine
@@swedemake5571 do i have to use the connection harness?
GuillermoXT P2 platform up to 2004 and 2004 including; will need connection harness. This on S60 / V70 / S80 and XC90.
GuillermoXT one more thing. I used another type of CFE on my 2004 S80. And on that one I could connect harness to the stereo wiring harness. Easy to access and easy to connect. There is 4 wires. But on the install guide for this CFE they have connected directly to CEM.
@@swedemake5571 I have the CFE Plus from SwedeSolutions. What is the difference between the installed OBD port and the connection harness? Is it possible to make a installation video especially for the additional harness?
Köpte en cfe ultra till min V70N och blev riktigt missnöjd.. Schyssta funktioner, men jag fick mer problem än nytta av den.. in/utfällning av speglar hamnade ur synk hela tiden, farthållaren slutade fungera osv osv
Det var ju tråkigt. Är inne på tredje bilen med min cfe. Fungerar bra. Däremot så är supporten totalt värdelös. Det var en funktion jag inte hade så jag programmerade en nyare årsmodell och det fungerar finfint. Kan vara värt att prova.
@@swedemake5571 Funktionerna i sig fungerade, men helt plötsligt kunde den t.ex bara fälla ut ena spegeln vid upplåsning. Då blev jag tvungen att rycka ur en säkring och fälla ut ena spegeln innan jag kunde åka någonstans.. Farthållaren kunde funka en resa ibland för att sen inte fungera på vägen hem osv... Tappade intresset helt så jag ska nog sälja vidare modulen bara