Harley Davidson FL Front Suspension Options
Вставка
- Опубліковано 2 жов 2024
- Tired of getting nose dives on your Harley Davidson FL model? Well what if we told you, we make front suspension that takes away the nose dive, increases performance, and increase comfort. We build these cartridges right here in Sturgis, SD. For more information on these kits visit our website (link below).
WEBSITE:
www.legendsusp...
EMAIL:
service@legendsuspensions.com
INSTAGRAM:
/ legendsuspensions
FACEBOOK:
/ legendsuspensions
I just got the 41mm for my 05 RK Classic with stock wheel. I'm eventually going to do a 21" front. Am i going to have problems in the future when i do the 21" wheel upgrade?
What are the +2 kits for?
Cool guys only
Put the Revo Arcs on my 2016' Road Glide Ultra CVO, such an improvement that I ordered the front fork kit, should be delivered this week. My question is what kit do I need to showcase the sporty beard, that things awesome! Dad was born just down the road in Deadwood. Love the videos and the outake bloopers!
What if you do a 18” fat tire. I got the 23” kit. Do I need the 21” travel limiter. 2021 RoadGlide and I’m a dealer for y’all
Apologies on the late reply, On the 18" fat tire kit that's about 21" over all, however depending on the kit you might not need a travel limiter since since Fat Tire kits front fender actually sits lower than the stock front fender.
A 21" limiter could be used on the safe side but it will depend on whos kit is being used. Please reach out to our Customer Service Team on this with any additional questions.
Great illustration, is there a Legend front suspension kit for (49mm) tubes that fits a 2017 HD Sportster 48 ?
Is it possible to run the 21" cartridge on stock tubes and a 19" wheel? Find myself needing a new front suspension but dont have the front 21" inch yet
Hey Don,
Yes, the Axeo21 can be installed prior to installing a 21" front wheel. You can run it with the 19" wheel, and they do the larger wheel later.
It will just have a 1" travel reduction with the 19" wheel.
Can ya do a video specifically about the heritage setup? Its supposed to be a softail touring model but the 28 degree lean angle and limited stock suspension 250lbs states otherwise myself being 275 and my wife 135 makes the bike a little squarely. Lots of coverage on the street bob, low rider, and fatbob but nothing much on the budget tour model .
Hey Dan,
Thank you for the comment, we will mark this on the list of possible videos.
I am interested in buying a front cartridge kit for my ‘97 flhr…. Who can I speak with to make sure I get the right shit….
Hey Jason, thanks for reaching out. Please send an email to service@legendsuspensions.com and they will get you taken care of. Thanks!
If I’m Running your 12 “ REVO A with a 21” aftermarket wheel added am I Buying the 41mm or 49mm axo21?
Would like the bike looking level
Excellent, what would you use on a 2022 Street Bob 114, for the front?
Hey thanks for reaching out. Here is the front cartridge that we offer for your bike. This kit will make a world of a difference to the performance of your bike. www.legendsuspensions.com/product/legend-axeom8-49mm-front-end-suspension-2018-20/
If you have any questions, don't hesitate to ask. Thank you!
I order the KO by mistake, can I still use it on my regular 49mm tube that I added 21 wheel
2022fltrxs. The back is the Legendary Revoa. The front has been replaced with a 21-inch wheel. I want to lower it by an inch, and I want a better suspension than now. Could you please recommend.
Hello-
Thank you for your business. For the front suspensions if you have added a 21" front wheel on your '22 Road Glide Special, we recommend the 0414-0543 Axeo21 This will work perfectly for your bike and rear suspension. This will have built in suspension sag and will lower your front end and bring your bike back to level.
The height gained from your wheel and tire will be corrected by this kit.
This is the part number you can use at any local shop with a Drag Specialties account, a Parts Europe account or Parts Canada account. IF you have any additional questions please feel free to use our chat feature on our website or email us at service@legendsuspensions.com.
@@LegendSuspensions Thank you for your quick reply. I will continue to subscribe to the video.
@@LegendSuspensions How many cc should I put in for the front fork oil?
Sorry for the delayed response, UA-cam is hiding comments.
We recommend taking the ounces recommended and just convert to CC's on google.
The oil volume will depend on kit selected for the application and the oil volume changes based on that, so We cannot tell you one amount if it will be wrong for a potentially different kit.
again, apologies for delay.
I have a 21 Fatty on a 19 RG. Which is the correct front part #. Thank You.
Any advice for a +2 with a 21?
Hey Hayden, please reach out to Customer Service on this one and they would be happy to help you work out the details. They will need some additional bike specifics on this to ensure your setup will work correctly. service@legendsuspensions.com
I have a 2014 Triglide trike I have a 21 inch front wheel 18 in the back what do you recommend for my 21 inch tire can you send me the information so I can purchase it through your company
Unfortunately we do not fit the 21 inch wheel on the Triglides.
I have 2000 Electra Glide Classic.
Stock 16 X 3 wheel. I want to install a 19 X 3.5 Wheel , would I have to lengthen the shock housing or could I keep it stock. How much for a kit to make it happen? Thank you
@Rich Godinez,
Good question. There are several pieces of information we would need to get from you before making a recommendation. We want to ensure you do not run into any issues, but there are several variables.
Can you please reach out to our customer Service Via the chat feature on our website, or please email service@legendsuspensions.com.
We are more than happy to help.
Thank you.
I'd like to get help with an answer
Hello, we would be happy to help. We offer a live chat feature on our website at www.legendsuspensions.com in the bottom right corner.
You can also email service@legendsuspensions.com
We also have a suspension recommendation form you can complete as well if it is in regards to what we recommend.
If it is technical we recommend the chat feature or sending in an email.
Thank you.
Customer blew out the seals on his HD OEM shocks. Repairing his front end by replacing them with Legend AXEOs. Do I need--or should I just as a good practice--replace the seals along with this kit?
OBTW: Most excellent presentation. Lot of great information for Dealership Tech and/or Parts-Service Counter person.
Hey Michael, We tend to recommend the replacement of at least seals when installing new suspension. Everything else is new like the oil and cartridges so we feel it is cheap insurance. In a lot of cases we recommend new bushings and seals unless the bike is pretty low miles, say under 10K.
Thank you for the kind words and glad the video helped!
Thank you for the info.
My stock front wheel was 18 and I installed a 19. I assume I can use the standard set of front shocks? 2010 FLHX
Blazer, you should be good to go on that unless you get into a 21" or 23" wheel. Then we start recommending a different kit.
Axeo Standards drop the front end 1.5" when the sag is incorporated. I wish Legends was more up front about this in videos like this one (Actually I wish their STD height sag was factored in to the cartridge length so the front end sits where it does at stock after install) They have a note on their website now about it, unfortunately I didn't realize this until after my install. They ride good but I am still disappointed
@ryanmitchell4266, Thank you for your business and support. The Axeo High Performance does use a different suspension sag rate over stock suspension. One thing to double check is the height of your fork tubes in your triple tree's as you will want those as flush as possible to net you as much height gain as possible if that is something you are trying to achieve. Factory travel is retained but to get that performance maximized it does sit differently than stock.
@@LegendSuspensions By "sit differently than stock for performance" are you implying that the bike needs to be more "nose down" for Axeo's to perform well? Harley rear shocks are 12" - You sell a 13" rear shock so that when your sag is incorporated the bikes rear will sit at the same stock height. Yet with the fronts, what you market as "Standard" replacement sits 1.5" lower, which is changing the geometry of the bike. If 1.5" of sag is needed, then you should be making "standards" 1.5" taller, so when the sag hits, it sits at stock height. I have my tubes less than flush in the triple trees, (which is not ideal) trying to get back every 1/8" that I can
Need some for a 03 wide glide
What do you have that fits a dyna switchback FLD? Dyna with FL front end and both sides are different. One size has cartridge and other has spring.
Hey Michael, thanks for reaching out. What year is your Dyna Switchback?
Sorry but, your products are way to expensive. I cannot see why the price is that high other than the fact that you know you have the owners of the Harleys but the nads. I'll look for something that is reasonable in price. Not a 200% markup
You obviously haven't looked much into aftermarket suspension then. Anything worth a damn is 800-1500 suspension wise no matter which of the 5 good suspension companies you pick
Hey Raymond, sorry you think that, but you are paying for quality products. Legend Suspensions uses only the highest quality materials along with innovative yet practical designs. There's a lot of hours spent putting into making these shocks and making sure they are the best performing shocks on the market. We will never compromise by using low quality materials or any other forms of cheap manufacturing. We prefer to use pristine, quality materials and components manufactured right here in the United States. Tried, tested, and proven by the best, our suspensions will give you the look and feel that you deserve.
@@LegendSuspensions I hope to give yall a visit during Sturgis if I can make it there this year
@@tylerwatkins6319 That would be awesome! Hope to see you here!
I got the back shock about 2 years ago. It’s like riding a Cloud. Wife was complaining when we got the new street glide on how much rougher it was then our old bike. We tried a couple different seats and it just wasn’t doing the job. I upgraded the rear shocks and she’s back to loving it as much as she used to.
We’re looking to upgrade the front shocks This fall. My question is what’s the difference between the
41mm and 49mm