your ip addressing is incorrect in the table i think. Step 1a says to use the second address from Subnet A as the I.P. address for VLAN 200, yet you have the second address from Subnet B for VLAN 200. The address for VLAN 1 has the same issue. Unless I'm misunderstanding the questions. Thank you!
I guess im randomly asking but does any of you know a tool to get back into an instagram account..? I was dumb lost the account password. I would love any tricks you can give me
@Eric Bryan I really appreciate your reply. I found the site through google and Im trying it out atm. Seems to take a while so I will get back to you later with my results.
Hi! Just have seen this video and it's very helpful, thank you! Also I got some questions: what's about leasing time? why is the command 'show ip dhcp server statistics' absent?
ip address 192.168.1.65 255.255.255.224 % 192.168.1.64 overlaps with GigabitEthernet0/1.100 Also for some reason I have to input g0/1 instead of g0/0/1
I just noticed, it's because that's what the lab instructions say. Part 2 says the dhcp server will serve subnets A and C. As to why, vlan 200 (192.168.1.64) is used for only virt lan purposes, maybe that's why, I honestly don't 'know'.
In Packet Tracer, we can configure the device without Console Cable also. Just select CLI and configure it. But in real time must do it using Console cable only!
you had an error message when configuring the lease time and then completely gnored it and then carried on, can you explain why we got the same error message and how do you confirm the lwease time is correct?
hello wow this is wonderful SR really helpful thank you so much
Glad it was helpful!
your ip addressing is incorrect in the table i think.
Step 1a says to use the second address from Subnet A as the I.P. address for VLAN 200, yet you have the second address from Subnet B for VLAN 200. The address for VLAN 1 has the same issue. Unless I'm misunderstanding the questions. Thank you!
Hi there, love these, they are so helpful! Did you do one for 8.5.1 Lab - Configure DHCPv6
?
Yes, soon
I guess im randomly asking but does any of you know a tool to get back into an instagram account..?
I was dumb lost the account password. I would love any tricks you can give me
@Calvin Oliver instablaster ;)
@Eric Bryan I really appreciate your reply. I found the site through google and Im trying it out atm.
Seems to take a while so I will get back to you later with my results.
@Eric Bryan It worked and I now got access to my account again. Im so happy:D
Thank you so much, you really help me out :D
As always thank you bro!
My pleasure!
You are the best
Hi I love your videos ❤️
I want to ask what about 8.5.1?
Hello, how did you get that subnet mask in part 1 and how did you know to borrow 2 bits thanks?? I love your comtent
Thank you!
You're welcome!
Hi! Just have seen this video and it's very helpful, thank you! Also I got some questions: what's about leasing time? why is the command 'show ip dhcp server statistics' absent?
Some of the commands are not working with packet tracer!
These have been extremely helpful in getting me some practical use. However, today i received a overlap error. Maybe you can help with why this is?
ip address 192.168.1.65 255.255.255.224
% 192.168.1.64 overlaps with GigabitEthernet0/1.100 Also for some reason I have to input g0/1 instead of g0/0/1
Yes, you cannot assign the same subnet ip address to the same router interfaces.
Where you take the labs?
Do you take labs from any book, website or software or video course?
If so, where can I get one?
Please contact our team, if you like to get any details....
And thanks for your great support and sharing with your friends....
cisco academy
Hello, why don't we exclude 5 addresses from this pool G0 / 0 / 1.200 as well. Part 2, Step 1, a.
I was very much wondering the same thing.
I just noticed, it's because that's what the lab instructions say. Part 2 says the dhcp server will serve subnets A and C. As to why, vlan 200 (192.168.1.64) is used for only virt lan purposes, maybe that's why, I honestly don't 'know'.
why using vty 0 15 and not vty 04? i saw another version that had vty 0 4
We can use as per our need, the number of lines needed.
It is not always from 0 to 4 or 0 15.
konmtol = awesome
How did you manage to calculate the subnetmask? 9:05
Once we practice, we can do subnetting quickly!
Thanks for your great support and sharing!
hi, i would like to ask regarding the console cable how you connect t?
In Packet Tracer, we can configure the device without Console Cable also. Just select CLI and configure it. But in real time must do it using Console cable only!
@@TechAcad thank you so much for the info have a nice day ✨
could you send me the pack tracer file of this in google drive
goat
Where is 4221
Can you help me in packet tracer
Yes, please contact our team using our website. Link will get from the description.
dhcp request in pc b failed, apipa being used
Please follow the instructions correctly!
dhcp success in pc a but failed in pc b. what might be wrong. on show ip dhcp pool leased address is 0
Did u get ot right? I have the same problem
@@camilavertiz1805 Me too, do you already have the solution to this problem?
Me too, do you already have the solution to this problem?
you had an error message when configuring the lease time and then completely gnored it and then carried on, can you explain why we got the same error message and how do you confirm the lwease time is correct?
Some of the commands will not work in packet tracer, it will work only in real routers, otherwise we must use gns3
@@TechAcad thanks its a shame, the "tutor" didn't mention this and carried on regardless .thanks for the reply
16:22 (don't mind me, just going to leave my personal timestamp right here)
28:32 pass
41:50 fa0/
49:24 Step 1:Configure R1
54:49 Verify the DHCPv4 Server configuration
57:26 Test connectivity by pinging R1’s G0/0/1 interface IP address.