Tail lights don’t come on . I have brake light and headlights but no tail lights when I turn on the headlight . What can it be? I checked the fuses under the passages seat all good there? I have a 04 mazda 3
I have a Mazda 3 2010. The high beam isn’t working but low beam work good. I’ve tried the troubleshooting with connecting the wires and high beam turns on but doesn’t work when turning on by the dimmer switch?
Hello, where is the fog light relay? You didn't point it out. Also, I want to have the high beams working with the fig lights at the same time. There was a video which was removed but I need advise. As far as I know I have to cut one prong off (isolator prong) from the fog light relay so the fog lights turn with the high beams. Thank you in advance
This is an odd one, I bought a mazda3 and low beam controls are weird. when I switch to "off" or "sidelight" mode. low beam turns on but when I switch to "low beam on" or "auto" mode, the low beam doesn't turn on.
So I changed my ballast on right side the low and high beams work when turned on BUT won’t the low beams won’t turn on with the parking lights when they used to what could cause that?
I have 2010 mazda 6 and the low beams and high beams stopped working on both the sides. just the signal lights are working. i went to dealer and he is scaring me with some crazy expense like 1200+ could be some power system failure bla bla. I checked the fuse of low beam and they are ok. High beam fuses are missing. Is there separate relay for left side and right side or just 1 relay that controls both side low beams?
Completely replaced the headlamps with a new set and still having issues with the low beams (high beams work fine, they worked fine in the factory set as well). We checked the relays by swapping them (high beams work in both situations) and still having issues with the low beams. Getting ready to change out the fuses even though hubby checked them with a voltage meter. Any ideas if this doesn't work?
How would I diagnose hazard lights Where's the fuse in the relays for the hazards aka the turn signals? Whenever I start my car my hazards are flashing I go to click the hazard button between the vents and nothing changes the only way I can get my hazards to stop flashing is by removing my fuse for my hazards but then I have no turn signals what could be causing my car to start up with hazards on but no alarm? I have a 2010 Mazda 3
my mazda axella 2010 is not energising the relay for the low beam headlight and the tail lights,i checked if the connections are good by bypassing the relay connectors and the light were on but when pluging in the relays the are not energising and i tried to change relays still same fault arises
Thank you for being very specific and pointing them out. Awesome 😊
Fixed my headlights with that btn2 fuse! Thanks manb
This has been exceptionally informative. But has only determined to me that my low beam issue goes far deeper then the fuses, relays and bulbs....
Super late, but did you ever figure it out?
Really good tutorial, love your style.
Tail lights don’t come on . I have brake light and headlights but no tail lights when I turn on the headlight . What can it be? I checked the fuses under the passages seat all good there? I have a 04 mazda 3
I have a Mazda 3 2010. The high beam isn’t working but low beam work good. I’ve tried the troubleshooting with connecting the wires and high beam turns on but doesn’t work when turning on by the dimmer switch?
Hello, where is the fog light relay? You didn't point it out. Also, I want to have the high beams working with the fig lights at the same time. There was a video which was removed but I need advise. As far as I know I have to cut one prong off (isolator prong) from the fog light relay so the fog lights turn with the high beams. Thank you in advance
This is an odd one, I bought a mazda3 and low beam controls are weird.
when I switch to "off" or "sidelight" mode.
low beam turns on
but when I switch to "low beam on" or "auto" mode, the low beam doesn't turn on.
My AC fans in mode 1,2,3 is not working, It only works in mode 4.
Is this a relay/fuse issue?
So I changed my ballast on right side the low and high beams work when turned on BUT won’t the low beams won’t turn on with the parking lights when they used to what could cause that?
I have 2010 mazda 6 and the low beams and high beams stopped working on both the sides. just the signal lights are working. i went to dealer and he is scaring me with some crazy expense like 1200+ could be some power system failure bla bla. I checked the fuse of low beam and they are ok. High beam fuses are missing. Is there separate relay for left side and right side or just 1 relay that controls both side low beams?
hello do you know which one controls the parking/ position light and also licence plate, my drivers bulbs are out, I replaced but might be a fuse
I Have A 2010 Mazda Cx9 Fuse & Relay Still Good, But Passenger Side Low Beam Still Not Working, What Do I Check Next?
My front turn signal wont light up when I turn my lights on but it does blink when I turn on my blinker...2010 mazda 3....any advice?
Amazingly educational thank alot so clear
Completely replaced the headlamps with a new set and still having issues with the low beams (high beams work fine, they worked fine in the factory set as well). We checked the relays by swapping them (high beams work in both situations) and still having issues with the low beams. Getting ready to change out the fuses even though hubby checked them with a voltage meter. Any ideas if this doesn't work?
Make sure you check the fuses without them installed in the car and check for resistance not for voltage. Easy to misdiagnose a fuse.
Great info, helpful 👍🏽
How would I diagnose hazard lights Where's the fuse in the relays for the hazards aka the turn signals? Whenever I start my car my hazards are flashing I go to click the hazard button between the vents and nothing changes the only way I can get my hazards to stop flashing is by removing my fuse for my hazards but then I have no turn signals what could be causing my car to start up with hazards on but no alarm? I have a 2010 Mazda 3
Did you ever get this fixed my car is exactly the same.
Please let me know
Are these little things labeled or how will I know wich is wich?
where is the alarm fuse and amperage
my mazda axella 2010 is not energising the relay for the low beam headlight and the tail lights,i checked if the connections are good by bypassing the relay connectors and the light were on but when pluging in the relays the are not energising and i tried to change relays still same fault arises
Had the same issue, ever figure it out?
i followed all the instructions, but still didn’t work. in the end, i found my power line connect to light was broken >
great
Im having this issue I hope it’s the fuse
😎 dope
Would this be the same for a 2010 Mazda 2?
Tail n head lights don't work only dash n brake light changed switch still nothing, clean up the ground wires also