Thank you very much! Thanks to your video, I was able to dismantle the back of my printer and find that there was a 10 euro bill stuck in the rollers! And that's why she was blocking !! THANKS!!!!!!!!!
i know Im asking the wrong place but does any of you know of a method to get back into an instagram account?? I was dumb forgot the account password. I would appreciate any help you can offer me!
@Tucker Axton Thanks so much for your reply. I got to the site on google and im in the hacking process now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
Useful video, that left hand side panel was giving me trouble and I needed a reference before I broke it accidentally haha. Lots of plastic tab weirdness...clever design but rather annoying to take apart.
Thank you for the feedback. I know, I missed that. Im sorry. Honestly, though, when your printer gives you an error related to absorber pad end of life, replacing it will not remove the error. You need to reset by buying a reset utility online, which is about $10 and it will reset the absorber life. Most of the time when absorber pad end of life message comes on, there is plenty more room for waste Ink ink the pads.
I have a MP210 Pixma.. Can you tell me what assy. board energizes the paper feed roller to feed the paper into the printer. I assume I have an electronic problem not a mechanical problem. The rollers are not turning .
👏👏👏 very useful your video, my mp560 don't power up after a print job. Is not a PSU problem , i try to repair and i have see somebody correcting by moving cable on motherboard. 😢 My last chance
Just watched your video on replacing carriage unit on a different model and you describe that if the encoder strip is not in the right position the unit will slam back and forth. That sounds like my problem. Any way for me to adjust?
Any tips for clearing the B500 message after cleaning the ink absorber? None of the reset trick's we've found on UA-cam other websites have worked. Thanks.
I sent a job to my printer and it shut off....I tried to turn it back on with no luck. I left it unplugged for a day, nothing. I tried other outlets in the house, nothing. I bought the same printer and swapped it the power pack? Thing (the box thing that the power cord plugs into) it wasn't that because the other printer worked with that installed in it from the"broken" printer. Lol. What would you suggest? Are there any fuses anywhere?
Hi, see my reply above: I had exactly the same problem. I checked the power supply module and it was Ok. So I found this video, opened the side-panel to access the electronic logic board, moved/pressed all connectors and, while it was still open, I plugged the power cable and... magic! The printer could be switched on again. On the board there is a hidden mysterious button, it could be that it senses that the side panel is open and it does a reset? I don't know but I have the feeling here there is something fishy. Planned obsolence maybe?
I watched the video and I was trying to see how the spring went on the mechanism that pushed the paper tray down when it is ready to print. And it was to hard for me to see. :(
Yes. The scanner is in the glass and plastic unit which comes off like we show in the video. When you flip it over, you will see some screws or clip tabs which release the upper and lower sections to open up to inside the glass.
Hi, Do you know how is the ink absorber part can be replaced or drained for this MP560? And how to replace the ink absorber part, I see that is is right next to the printer control panel. Thanks
Remove all of the ink cartridges... then there's a gray bar that's on both sides of the print head. Lift that bar and remove the print head.... then soak it in rubbing alcohol. Wipe it off and let it dry then reinstall it
There may be something in the way of the paper or rollers need cleaning. There are roller throughout the printer where paper flows, check those passages and clean them if necessary. This printer should also have an automatic roller cleaning option. Go to menu on printer, scroll to MAINTENANCE, then select ROLLER CLEANING and follow directions.
@@billdem9298 It seems like the mechanism that sits under the carriage is stuck and not moving forward. There may be something there on the bottom preventing it from moving. Either too much ink gunk or broken gear. I have a similar model and may be able to send a video of what may need to be done.
Thank you very much! Thanks to your video, I was able to dismantle the back of my printer and find that there was a 10 euro bill stuck in the rollers! And that's why she was blocking !! THANKS!!!!!!!!!
i know Im asking the wrong place but does any of you know of a method to get back into an instagram account??
I was dumb forgot the account password. I would appreciate any help you can offer me!
@Levi Kendrick Instablaster ;)
@Tucker Axton Thanks so much for your reply. I got to the site on google and im in the hacking process now.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Tucker Axton it worked and I actually got access to my account again. I'm so happy:D
Thank you so much, you saved my ass!
@Levi Kendrick you are welcome xD
Useful video, that left hand side panel was giving me trouble and I needed a reference before I broke it accidentally haha.
Lots of plastic tab weirdness...clever design but rather annoying to take apart.
Thanks for your video, very interesting. A pity that you did not go for the ink absorber pads😢
Thank you for the feedback. I know, I missed that. Im sorry. Honestly, though, when your printer gives you an error related to absorber pad end of life, replacing it will not remove the error. You need to reset by buying a reset utility online, which is about $10 and it will reset the absorber life. Most of the time when absorber pad end of life message comes on, there is plenty more room for waste Ink ink the pads.
I have a MP210 Pixma.. Can you tell me what assy. board energizes the paper feed roller to feed the paper into the printer. I assume I have an electronic problem not a mechanical problem. The rollers are not turning .
👏👏👏 very useful your video, my mp560 don't power up after a print job. Is not a PSU problem , i try to repair and i have see somebody correcting by moving cable on motherboard. 😢 My last chance
Just watched your video on replacing carriage unit on a different model and you describe that if the encoder strip is not in the right position the unit will slam back and forth. That sounds like my problem. Any way for me to adjust?
Any tips for clearing the B500 message after cleaning the ink absorber? None of the reset trick's we've found on UA-cam other websites have worked. Thanks.
I sent a job to my printer and it shut off....I tried to turn it back on with no luck. I left it unplugged for a day, nothing. I tried other outlets in the house, nothing. I bought the same printer and swapped it the power pack? Thing (the box thing that the power cord plugs into) it wasn't that because the other printer worked with that installed in it from the"broken" printer. Lol. What would you suggest? Are there any fuses anywhere?
Hi, see my reply above:
I had exactly the same problem. I checked the power supply module and it was Ok. So I found this video, opened the side-panel to access the electronic logic board, moved/pressed all connectors and, while it was still open, I plugged the power cable and... magic! The printer could be switched on again.
On the board there is a hidden mysterious button, it could be that it senses that the side panel is open and it does a reset? I don't know but I have the feeling here there is something fishy. Planned obsolence maybe?
Do you have a disassembly video for Canon Pixma Pro-10?
I watched the video and I was trying to see how the spring went on the mechanism that pushed the paper tray down when it is ready to print. And it was to hard for me to see. :(
I'm trying to find a way to clean the inside of the scanner's glass, but I don't know how to remove it. Is there a way to do it?
Yes. The scanner is in the glass and plastic unit which comes off like we show in the video. When you flip it over, you will see some screws or clip tabs which release the upper and lower sections to open up to inside the glass.
@@303electronics thank you so much! I will give that a try!
Hi, Do you know how is the ink absorber part can be replaced or drained for this MP560? And how to replace the ink absorber part, I see that is is right next to the printer control panel. Thanks
Remove all of the ink cartridges... then there's a gray bar that's on both sides of the print head. Lift that bar and remove the print head.... then soak it in rubbing alcohol. Wipe it off and let it dry then reinstall it
This question is about the absorber pads not the print head . Any help for the question above?
Hi my all the cartridge are filled but when i turn on it shows one of it not inserted
Paper gets stuck inside the printer what is the problem
There may be something in the way of the paper or rollers need cleaning. There are roller throughout the printer where paper flows, check those passages and clean them if necessary. This printer should also have an automatic roller cleaning option. Go to menu on printer, scroll to MAINTENANCE, then select ROLLER CLEANING and follow directions.
BARBARIAN !!!!!
Exactly my opinion...
I'd like to send you a video showing my printer issue
Sure. Please attach a link to the video in the reply. I'll take a look and see if I can be of any help.
ua-cam.com/video/apL1vWCHaXs/v-deo.html
@@billdem9298 It seems like the mechanism that sits under the carriage is stuck and not moving forward. There may be something there on the bottom preventing it from moving. Either too much ink gunk or broken gear. I have a similar model and may be able to send a video of what may need to be done.
Ok, send e the link please.
I see several videos push back the absorber tray for error 6A80. I tried that and I didn't see any foreign matter.
Спасибо!
You're welcome! Have a great day!
Xfa en español
Great! Thanks