Yeah, he definitely had the soldering iron on too high. That setting was probably 500c. I have one of them and I did some tests with it and comparison with my TS-100 using the same size and type of tip and found the middle setting is about 350c, and at that setting you can barely see hte element glowing at all
I just bought one of these branded 'Valex' at my local supermarket. While the burner works fine I had great difficulty getting the soldering attachment to work. I light the flame as seen in the video @2:38 but it just stays forever with the flame outside and never become red hot on the inside. For some reason the video skips that crucial part and makes me wonder how long it took. I waited more than five minutes in vain thinking it would run out of gas before lighting up properly. The only way I could eventually get it to work was to heat up the bit with another gas torch until it was almost red hot and only then did I get the burning inside the bit as shown at 2:43. At 4:31 he lights it again and this time with no cut in the video, but I think it was already hot and that's why it worked. For me it is the same, if I light it when it is still hot it works but next day when I try to use it again it will not work and I have to heat it with another burner again. Can someone who has one of these, or perhaps even @Creative Useful tell me what happens between the cut at @2:42, and how long it really takes?
I've got one of these in blue, works just fine, I had one previous that was hard to use as you couldn't see how much gas was left so it would often run out and hard to refill this one you can see see before you use.
I think you better just buy another one. I had one with such a problem and fixed it by replacing a rubber o-ring. It worked but after a few days it almost hurt me when I was using it and something went wrong and all the gas came out at once making a ball of fire.
Wisnu Pamungkas if you use good butane it will last for years get the premium stuff. Its a good little tool for $3 I recommend it, but its no replacement for a plug in soldering iron. This is for quick repairs like soldering a couple wires your not going to do what this person does in this video. Also the first way they use the torch is completely wrong, your going to damage your electronic components :( that should be used for heating of metal parts before solder or braze of most probably jewlery or art m but i would not point that at an electronic component. Also this video fails to show how the fillament is light in the soldering iron. Ive been using a cigar torch but i dont read chinease so im thinking there’s probably a smarter way.
Excellent! I’ve always been looking for a simple way to rotisserie my circuit board.
Yeah, he definitely had the soldering iron on too high. That setting was probably 500c. I have one of them and I did some tests with it and comparison with my TS-100 using the same size and type of tip and found the middle setting is about 350c, and at that setting you can barely see hte element glowing at all
Nice video 😎👍
I just bought one of these branded 'Valex' at my local supermarket. While the burner works fine I had great difficulty getting the soldering attachment to work.
I light the flame as seen in the video @2:38 but it just stays forever with the flame outside and never become red hot on the inside. For some reason the video skips that crucial part and makes me wonder how long it took. I waited more than five minutes in vain thinking it would run out of gas before lighting up properly. The only way I could eventually get it to work was to heat up the bit with another gas torch until it was almost red hot and only then did I get the burning inside the bit as shown at 2:43.
At 4:31 he lights it again and this time with no cut in the video, but I think it was already hot and that's why it worked. For me it is the same, if I light it when it is still hot it works but next day when I try to use it again it will not work and I have to heat it with another burner again.
Can someone who has one of these, or perhaps even @Creative Useful tell me what happens between the cut at @2:42, and how long it really takes?
Bagus Sekali.... Sangat Praktis
I've got one of these in blue, works just fine, I had one previous that was hard to use as you couldn't see how much gas was left so it would often run out and hard to refill this one you can see see before you use.
Semakin ringan pengerjaan
Looks pretty nice, bro!!! 😃
Wow amazing
Can you charge it with cigarettes lighter gaz?
Nice👌👌👌👌
Interesting
And where is the link to the product?
Nice
yes
Cek harga bosskuh😂
Sir ji ye airan kaise milega
Gas kitne din chalege bhai
I have this soldering iron but IT cannot deliver gas to the head IT keeps spreading around on off button Can somebody help?
Días como se hace el mantenimiento y desarmada
Kaha milega bhai
this iron is worthless in heavy circuit. but it is a one of the BEST hand tool.
nice little tool, i have one, mind you mine never came pre filled with gas...lol
Maybe because of your country's standards, for safety purposes
@@elchupet1835 Every civilised country should have the same safety standards not to post the item full of gas.
That’s normal. I don’t want cheap Chinese gas to ruin my torch.
Harga nya berapa tu boss
Punya saya GK bisa diisi gas. Sudah kutekan Kuwat tetap tak masuk gasnya. Tolong solusinya
Test lepas ic
Haw much price in Bangladesh
Buy site
Bro give this bay link
Provide best buy link
solder mini MT100 di Tokopedia 170Rb
the gas comes out the lower valve and i dont know how to fix it.
I think you better just buy another one. I had one with such a problem and fixed it by replacing a rubber o-ring. It worked but after a few days it almost hurt me when I was using it and something went wrong and all the gas came out at once making a ball of fire.
We I get this one ?
J'en veut mais comment avoir votre adresse ?
How long will the gas last?
jeez...
Where did you buy it pls
On aliexpress
Skip to 5:55 for best part of this "review"
⚠1:07 deal-breaker right there - no ignition!!
you are suppose to use the heating wire atttachment.. why use open flame on pcb
Because he is desoldering components from a dead board
he did, midway through the video
What is the name that thing on your table? The green thing with draws...
sketching mat if im not mistaken
Heat resistant soldering mat
I need soldering gas how I get
It is same gas used for cigarette lighters. Any supermarket has it.
how to recharge again? Please explain
There is a valve at the bottom,
Recharge it like a gas lighter.
(5:27)
please watch the full video before asking
haha he did not see until the end of the video.. ppl nowadays lol
Bisa ga buat pipa ac
Dónde los venden
Qe clase de gas se necesita
Butano o cualquier otro gas, solo necesita calor.
kahkahkah...
made in cina..
buy today broken tomorrow
how to recharge?
Put it in a**
Harga berapa gan
Rm 38.00 sahaja
Belinya dimana ya kak
First thing when making a video ..FIND SOME NOISE ..
Di mana tempat pemesanan
This heat gun rs
After longtime use the tiny hole in it will get blocked and becomes useless.
Blocked ??? Because of what ??
I have a plan to buy a type of solder like that, but I want to know the advantages and disadvantages first.
Wisnu Pamungkas if you use good butane it will last for years get the premium stuff. Its a good little tool for $3 I recommend it, but its no replacement for a plug in soldering iron. This is for quick repairs like soldering a couple wires your not going to do what this person does in this video. Also the first way they use the torch is completely wrong, your going to damage your electronic components :( that should be used for heating of metal parts before solder or braze of most probably jewlery or art m
but i would not point that at an electronic component. Also this video fails to show how the fillament is light in the soldering iron. Ive been using a cigar torch but i dont read chinease so im thinking there’s probably a smarter way.
For 4 dollars you could buy lots of it so don’t be bothered by clog.
my hold got blocked after 2 minutes of using it. but i think im missing something. maybe i tightend up a valve i shouldnt have
found solution, had to take the lower metal bit off, when i blow it in the spare (aluminium head) popped out, it was somehow blocking the flow
Turn that crappy background music off and restart.Mine does not turn red no matter what.
Agreed 👍
D i khan ma hamy ak pic caya mil jay ga
😅🤣😂😭😢😥😓🤮😡🤬😰😱
Suback brooo
Mf ya Video tidak fokus. Musiknya terlalu kencang. Tidak ada narasi yg yg mengedukasi.
Its a lighter😂😂
It's heavier than a lighter.
Rupes
Not a review at all - it is a show and no tell!
What a horrific video! How to destroy a circuit board in minutes!
musik nya berisik
Very bad
Kitna ma mill jaga