One of the best real world comparison videos i have seen on any subject. It might be worth comparing clamping force applied but i doubt there's much difference.
Thanks mate, much appreciated! I did consider buying in a gadget to test the force but, as I kind of say in the vid, force applied with either is ample. I'm not convinced with the Bessey's ability to apply extra pressure with an allen wrench. It makes the clamp flex to where you can see the jaws become slightly angle which can obviously do the opposite of what you want - closing joints. If it needs that much pressure to close a joint, it's worth re-cutting the edges on the workpiece tbh. But yeah, no doubt with that extra feature the Bessey would win a clamping pressure test.
Thank you mate. They're certainly worth a look. Their speciality has to be their own brand router table insert plates and router lifts. Just superb quality. I have one of their insert plates. You can see the video on it pop up at the end of this vid if you're interested.
Cheers Peter. Wasn't gonna review them tbh. Just give a mention when they inevitably appeared in a vid sort of thing. Having seen them a bit put down, thought they deserved a fair shout. People will find an axminster comp useful I think. UK viewers anyway.👍
@@BischBaschBosch Cheers Stew! Yeah, I thought some of those comments were pretty wide of the mark; weird what some folks spout out, isn’t it? 🤷♂️ Anyway, you’ve saved me from having to buy a pair of Revo’s just to compare, so thanks for that! 😂😂
Interesting. The Sauter don't actually say on them where they're manufactured. Quite surprised it's Israel. The Bessey Revo are made in Germany according to the label. Some of their budget models are made in China apparently.
I have no doubt what so ever that these are good clamps and if some company gifted me a load I would also tell you how good they are. Not to get carried away with how much crushing force you can get out of them, I only require clamps to hold bits of wood together until the glue dries. A pair of 1200mm aluminium clamps can be had online for approx. £30 if they are good enough for Paul Sellers they're good enough for me (small hack required ala Mr Sellers).
Doesn't matter if something is gifted to me or not, if it's shite and not fit for purpose, I'd say so as I have in previous reviews and comparisons. One of the points I make in the video is the ability of the Bessey to apply excess clamping force is unnecessary. If you need that much force, generally your edges aren't prepared properly. 20 plus years in boat building and construction, I've made do with whatever clamps. Most often hand me downs - sash (aluminium and steel/iron), pipe, G and F - no frills stuff, but nonetheless helped me produce work I'm very proud of. I'm a recent convert to the parallel clamp of this Bessey Revo type design. They are just better. "Good enough" is fine but it isn't the final word. Also, the needs of amateurs are different to those of most professionals. Paul Sellers, although a very respected craftsman and teacher, regards himself as an amateur. Amateur because he isn't relying on daily production of work to put food on the table and keep a roof over his head. For professionals, those of us who produce day in, day out to make a living, little efficiencies with certain tool choices can have a big impact. I would hope that videos like this help assist the amateur and professional alike make better choices of where to sink their cash, even if the products aren't for everyone.
Yeah, like I say in the vid, the Bessey is still the one. Funny enough, the Wellcut are almost exactly the same as the Sauter. From the same factory no doubt. Even has the same moveable foot/End stop.🤷♂️
Can't argue with that mate. That's hella good value! Didn't realise they were so cheap. Seems around £25 will get you a 600 now but still, if 8 need anymore ...😄😄
@@BischBaschBosch it was via eBay 2 weeks ago I have bought 4 in total of those they should still be available they were up for 28 but accepted a 25 offer
They sell a 5 metre saw track. I would be interested in your review, if they happened to send it over apropos of thanking you. 😇 An excellent appraisal. Thank you.
Thanks mate. Don't think I even have the room but if I did, I don't think they're able to send rails over 3m to the UK currently. Just EU, Switzerland and Norway. Just had a quick look and it seems no one is selling the 5m Festool rail in the UK. Prohibitive delivery cost maybe?
Funny, I fucking hate the F style clamps! Ive had a proper reminder today why I hate them - nearly cost me a lot of oak... Then your vid shows up lol Bar their high jaws Ive no time for them, I'd sooner use pipe clamps, they never let me down when glue is reaching set time, the bars can't take any glue spillage and be used again I haste I could go on bud, theyre too much and to little too - better clamping options out there and more so one handed too IMO.
😂 Whatever works for you with these sort of things. I love F and G type clamps for curvy stuff mainly, like you say, due to the depth. They can be a nightmare when you need quick clamping on steamed stuff though. I have a bunch of inherited sash and pipe clamps. Nearly 70 years old some of them. Still work perfect! I am a bit of a convert to these parallel jaw type ones. Clamping force of a sash/pipe but with deeper jaws. Easier to set I find too. Can get a bit expensive these though. Pipes can save a lot of money and work perfect. And you can custom length them!👍
Sauter body clamps look like a blue version of the one’s soled by Rutlands in the U.K. I have the Rutland ones and I can get enough clamping force to dent the timber even with the soft jaw Got to the end of the video and differences? Not doubting you BTW, just asking 😁
Yeah, that's what I was trying to get across really. The force from the budget ones are ample. Very similar to the Rutlands but different casing and handle. The Sauter and Bora are identical though. 🤷♂️👍
Forgive me if you covered this. I did watch twice but my concentration is limited. I assume there is nothing to extend two clamps together like you can do with the Bessy?
Don't worry, it's me not you. Totally forgot about the connector. Had looked into previously. Annoyingly, the connector would seat the Sauter bar ok but the bars are missing to hole in the Bessey. The hole is needed for the bolts! If you had the means, you could drill the Sauter bars out I suppose. 🤷♂️ Failing that, it's s bessey only option.
Don't have the Axminster Trade version bud but visually, you can see that like the Sauter, certain mechanical elements aren't as overengineered as the Bessey. They do have the same jaw size as the Bessey it seems. Also have a jointed handle so you can turn it sideways, using as a sort of wrench to apply more force. Though, as I say in the vid, care has to be taken when using these features. More than enough pressure can be applied for 99.9% of tasks just hand turning the handle. Like other budget versions, no doubt they work perfectly well (they seems well reviewed) and will meet clamping needs. They just might not feel quite as "proper" as the Bessey.
@@BischBaschBosch I have the Axminster ones, I’ll be doing a comparison before too long. One difference is that the aux clamps have a handle that can be flipped 90° so you can apply more force, but as you say, Stew, that’s not always a good thing! 😬👍
@@10MinuteWorkshop Absolutely mate. As I've said elsewhere here, if you need that much force to close a gap in a glue up, you're better off redoing the edges. Shouldn't need 170nm or whatever it is the Bessey is capable of.
@@BischBaschBosch Exactly! I think I said much the same in my 5 clamps bud or whatever it was - put 5000 Newton’s of clamping pressure over something I’ve made and it’ll snap in half! 😯😂
One of the best real world comparison videos i have seen on any subject. It might be worth comparing clamping force applied but i doubt there's much difference.
Thanks mate, much appreciated! I did consider buying in a gadget to test the force but, as I kind of say in the vid, force applied with either is ample. I'm not convinced with the Bessey's ability to apply extra pressure with an allen wrench. It makes the clamp flex to where you can see the jaws become slightly angle which can obviously do the opposite of what you want - closing joints. If it needs that much pressure to close a joint, it's worth re-cutting the edges on the workpiece tbh. But yeah, no doubt with that extra feature the Bessey would win a clamping pressure test.
Really informative video. Not come across Sauter before, will definitely be checking them out based on what you showed.
Thank you mate. They're certainly worth a look. Their speciality has to be their own brand router table insert plates and router lifts. Just superb quality. I have one of their insert plates. You can see the video on it pop up at the end of this vid if you're interested.
Also have a look at the Woodgrafter on YT. That Andy did an interesting review of their router insert and associated bits. He seemed impressed.
Good call Julian. He did a pretty in depth review and set up etc.👍
Great comparison video when I need to get some more big clamps will be looking at the sauter ones for sure.
Cheers bud. They certainly do the job and fairly competitively priced for this type of bells and whistles parallel clamp.
Thanks you. i just bought a 4 × 800 and 4 × 1000. Wanted to go buy one baissy for comparison. You save my money.
That's great. Hope you like 'em mate. Still using mine along side my Bessey ones everyday. No issues at all. Good budget clamp.👍
Cheers for this Stew - great review, and saved me a job! I have the Axminster equivalents, I’ll be comparing them before too long. 👍👍
Cheers Peter. Wasn't gonna review them tbh. Just give a mention when they inevitably appeared in a vid sort of thing. Having seen them a bit put down, thought they deserved a fair shout. People will find an axminster comp useful I think. UK viewers anyway.👍
@@BischBaschBosch Cheers Stew! Yeah, I thought some of those comments were pretty wide of the mark; weird what some folks spout out, isn’t it? 🤷♂️ Anyway, you’ve saved me from having to buy a pair of Revo’s just to compare, so thanks for that! 😂😂
According to their reply on one of the forums, these clamps are made in Israel - so are probably not the same as brands sourced from China.
Interesting. The Sauter don't actually say on them where they're manufactured. Quite surprised it's Israel. The Bessey Revo are made in Germany according to the label. Some of their budget models are made in China apparently.
Thanks for Another honest review.👍
Pleasure, thanks Lloyd.
Very detailed comparison/review.
Cheers.👍
I have no doubt what so ever that these are good clamps and if some company gifted me a load I would also tell you how good they are. Not to get carried away with how much crushing force you can get out of them, I only require clamps to hold bits of wood together until the glue dries. A pair of 1200mm aluminium clamps can be had online for approx. £30 if they are good enough for Paul Sellers they're good enough for me (small hack required ala Mr Sellers).
Doesn't matter if something is gifted to me or not, if it's shite and not fit for purpose, I'd say so as I have in previous reviews and comparisons.
One of the points I make in the video is the ability of the Bessey to apply excess clamping force is unnecessary. If you need that much force, generally your edges aren't prepared properly.
20 plus years in boat building and construction, I've made do with whatever clamps. Most often hand me downs - sash (aluminium and steel/iron), pipe, G and F - no frills stuff, but nonetheless helped me produce work I'm very proud of. I'm a recent convert to the parallel clamp of this Bessey Revo type design. They are just better.
"Good enough" is fine but it isn't the final word. Also, the needs of amateurs are different to those of most professionals. Paul Sellers, although a very respected craftsman and teacher, regards himself as an amateur. Amateur because he isn't relying on daily production of work to put food on the table and keep a roof over his head. For professionals, those of us who produce day in, day out to make a living, little efficiencies with certain tool choices can have a big impact.
I would hope that videos like this help assist the amateur and professional alike make better choices of where to sink their cash, even if the products aren't for everyone.
Think personally I will stick to Bessey and Wellcut clamps.
Yeah, like I say in the vid, the Bessey is still the one. Funny enough, the Wellcut are almost exactly the same as the Sauter. From the same factory no doubt. Even has the same moveable foot/End stop.🤷♂️
@@BischBaschBosch Exactly but at a MUCH lower price i paid £25 each for 1000mm Wellcut clamps with free postage.
Can't argue with that mate. That's hella good value! Didn't realise they were so cheap. Seems around £25 will get you a 600 now but still, if 8 need anymore ...😄😄
@@BischBaschBosch it was via eBay 2 weeks ago I have bought 4 in total of those they should still be available they were up for 28 but accepted a 25 offer
Crazy. Gonna have to have a look at that price.👍
Great review as always!
Cheers John.👍
They sell a 5 metre saw track. I would be interested in your review, if they happened to send it over apropos of thanking you. 😇 An excellent appraisal. Thank you.
Thanks mate. Don't think I even have the room but if I did, I don't think they're able to send rails over 3m to the UK currently. Just EU, Switzerland and Norway. Just had a quick look and it seems no one is selling the 5m Festool rail in the UK. Prohibitive delivery cost maybe?
Those Sauter clamps look identical to the Bremen clamps that Harbor Freight sells. Are they the same?
Looks like it. Essentially the same clamp is rebranded/coloured and sold under a few names. Wellcut and Bora for example.
Funny, I fucking hate the F style clamps! Ive had a proper reminder today why I hate them - nearly cost me a lot of oak... Then your vid shows up lol Bar their high jaws Ive no time for them, I'd sooner use pipe clamps, they never let me down when glue is reaching set time, the bars can't take any glue spillage and be used again I haste I could go on bud, theyre too much and to little too - better clamping options out there and more so one handed too IMO.
😂 Whatever works for you with these sort of things. I love F and G type clamps for curvy stuff mainly, like you say, due to the depth. They can be a nightmare when you need quick clamping on steamed stuff though. I have a bunch of inherited sash and pipe clamps. Nearly 70 years old some of them. Still work perfect! I am a bit of a convert to these parallel jaw type ones. Clamping force of a sash/pipe but with deeper jaws. Easier to set I find too. Can get a bit expensive these though. Pipes can save a lot of money and work perfect. And you can custom length them!👍
Sauter body clamps look like a blue version of the one’s soled by Rutlands in the U.K.
I have the Rutland ones and I can get enough clamping force to dent the timber even with the soft jaw
Got to the end of the video and differences? Not doubting you BTW, just asking 😁
Yeah, that's what I was trying to get across really. The force from the budget ones are ample. Very similar to the Rutlands but different casing and handle. The Sauter and Bora are identical though. 🤷♂️👍
@@BischBaschBosch definitely ample for sure.
I am very please with mine I must say. The clamping guide to make a square look really good though
@@BischBaschBosch Adding to this, the Rutlands are identical to the Well Cut ones.
Forgive me if you covered this. I did watch twice but my concentration is limited. I assume there is nothing to extend two clamps together like you can do with the Bessy?
Don't worry, it's me not you. Totally forgot about the connector. Had looked into previously. Annoyingly, the connector would seat the Sauter bar ok but the bars are missing to hole in the Bessey. The hole is needed for the bolts! If you had the means, you could drill the Sauter bars out I suppose. 🤷♂️ Failing that, it's s bessey only option.
Shame… I have to buy the vessel now 😅
You mean the Bessey? You'll be happy with them I'm sure 👍
@@BischBaschBosch thank you 🙏
Nice video! How do you think they compare to the Axminster ones?
Don't have the Axminster Trade version bud but visually, you can see that like the Sauter, certain mechanical elements aren't as overengineered as the Bessey. They do have the same jaw size as the Bessey it seems. Also have a jointed handle so you can turn it sideways, using as a sort of wrench to apply more force. Though, as I say in the vid, care has to be taken when using these features. More than enough pressure can be applied for 99.9% of tasks just hand turning the handle. Like other budget versions, no doubt they work perfectly well (they seems well reviewed) and will meet clamping needs. They just might not feel quite as "proper" as the Bessey.
@@BischBaschBosch I have the Axminster ones, I’ll be doing a comparison before too long. One difference is that the aux clamps have a handle that can be flipped 90° so you can apply more force, but as you say, Stew, that’s not always a good thing! 😬👍
@@10MinuteWorkshop Absolutely mate. As I've said elsewhere here, if you need that much force to close a gap in a glue up, you're better off redoing the edges. Shouldn't need 170nm or whatever it is the Bessey is capable of.
@@BischBaschBosch Exactly! I think I said much the same in my 5 clamps bud or whatever it was - put 5000 Newton’s of clamping pressure over something I’ve made and it’ll snap in half! 😯😂
💪👍👍👍🤗🇨🇭
😁👍