people kept sleeping in my car until I put a damn bar on my wheel. for some reason that keeps them out of my car. People are weird, lol. Thank god they left it clean. (The windows were broken, so you could just get in by hand) shitty old corolla.
This was very well made. Damn. What year did they start requiring the keyfob to be right next to the ignition key? I didn't even know they had that shit. That's advanced. Good vid man, ty. I have a shitty old Corolla that does not require a keyfob (everything is manual, even the windows, lol). Any suggestions on how I can learn to hotwire it? Not interested in theft, moreso for if I get stuck without my key or something. Also it just looks fun, not gonna lie hehe.
Use a Fuqing hammer. There is a special key bypass lead inserted in the Windshield about 11.5" from the base of windshield then measure 14.25" from the edge of windshield. Strike with Small Ball peen hammer no more than 20 oz. and car should start by pressing the emergency brake release button.
Awesome, saves big bucks if you lose your spare key and need one re chipped. Obviously better for low value cars as the cost of re chipping your car would write it off :-)
exactly. wprst case just install a cheap killswitch and get creative with hiding it. no ones stealing your car if they cant find the kill switch. and if they have time to find the kill switch your cars gunna get stolen no matter what lol
Even more for the insurance company. If you got crap modified like this and you car gets stolen and recovered the insurance company will refuse to pay. In other words if your shit gets stolt you better hope it never gets recovered!
They won’t pay anyway, gps in it, find it but rfid capture disable with device. They know easy too steal, banks don’t care more bondage contracts when buy new one. Resell buy as totaled junkyard copart, I saw several clean never in accident, no rebuilt. Can see same look up vins, bet buying stolen. All crooks, said flooded in copart and front was destroyed, ‘like new” in Tampa.
I have a 2018 Tacoma TRD Sport. Do you have a Vidor on Kill Switch? If not, could you please make one. If you don't, could you point me in the right direction? Thanks
You probably dont care but does any of you know a method to get back into an instagram account..? I was stupid forgot my login password. I would love any assistance you can offer me
@Bobby Zachary thanks for your reply. I got to the site through google and im trying it out atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
I have a lexus.. Sometimes back the got damaged.. Since then I'm having problems... Nowadays my key is not accepted and if by chance it accepts then it will give one chance and when i try my engine starts and when i accelerate it dies and security light starts blinking and now it will not turn off for min of hour or a day or a week... Wat is d problem in my case
Awesome,and you showed it works too,even better,yeah I hate those bs vids they say do this,do that,and you fk around for 30 minutes and dosn,t work.they just like wasting peoples time for a laugh,so cheers and best wishes to you,merry Christmas and a happy new year to all. From,Auckland,New Zealand.⭐⭐⭐⭐⭐👍👍👍👍👍💯
Bro just unplug the whole loom that plugs into the back of the barrel and use a a craft cutter to cut the tape to expose the wires nexts step is find the two mobilizer wires and disconnect them. after you've had done that your see the other 2 two wires that should be the same colour as the ones the moblizer was connected too rejoin them and use tape to put it back together the end
you gave him bad advice. Your option works on those machines where the receiver is separate from the lock and there is a wire to the antenna around the lock. in his version, this will not work. then you need to open this box and remove the wire from the place where the antenna is soldered. it’s easier to loop the locks from the outside and set aside a few loops on the key. the wire should be looped back. In fact, you need to copy the device of the box of the lineman with ebay or aliexpress. there is still a relay but it is not necessary if you do not use an alarm with a start and two keys with chips.
i did this to my 2002 ford ranger with just the chip. worked great. but the computer did show a constant chip key signal i tried this with my 2001 toyota highlander, worked, then 2 hours later would not work. im guessing the computer noted the constand signal and shut it down. any ideas ?
Bypass is not what you did, in mater fact you complicate it, to really BYPASS without original key you have 2 choices, you got 1 thing right and that is opening the panel, you have to connect 2 wires together and one wire unplug and replug somewhere else, the other way is the computer but even me don't have the experience and tools to do it ( the right way) But in all this why just don't you switch the chip to a replacement key , doesn't cost much at all.
It does look like it is bypass.He didn`t lie He did show a lot of proof of wires.. It is bypass around the tie wrap and yellow air bag wires.I hate it when UA-camr say it and don`t give proof.
The all a thief needs for you car is a hammer and a screw driver to start it and you immobiliser off and if ur insurance find out u did this and ur car is stolen the insurance will be void and insurance company won’t pay out
How about just making sure to keep track of your keys so that you DON'T have to keep paying to have new ones made? I never understand people who "lose" all their car keys. 🤷♂️
fucked up)) bumpkin)))discovered America))) In Russia, about 15 years, half of the cars with the immobilizer ride with the key under the panel with auto start. wrap a few turns of a normal wire on the key, securing it with electrical tape and bring the wire to the desired length by twisting two three turns around the lock. so at least the key can be attached in a remote place and not in plain sight with a lock. although that’s why they’ve turned the lock differently and stole the car without any problems. solves the installation of an alarm "pandora" with the function of reading and sending the code instead of the key with the permission to run when opening from the remote control. although someone needs to be hijacked with their cross-linked engine controller. Only the radio relay in the tank on the fuel pump line will save. but no one canceled the codegrabber))
Well I am trying to bypass the immobilizer to use a start engine button and the damn immobilizer only gives a signal when it's attached to the lock and with the key in at exactly the right position, nothing else works, you can attach and stick and move around as much as you want, if the key is not in the actual lock at the precise engine start position it doesn't work, what the hell do I do now? :)
@@shanedoe7232 Well that sure as hell doesn't work on my car. I think it's engineered with the coil's metal core or something, but it only works with the chip PRECISELY in the same position as it would be when the key is in. I thought the same, "hey, it's an RFID, coil/chip, big deal, I'll just tape the chip around the coil and I'm done". Won't work in a million years, only in that precise position. Meanwhile, the coil got damaged anyway in this process, so I ended up buying another ECU/immobilizer/coil/lock/key set and this time I just ziptied the lock with the key in it on the ON position under the steering column. Yeah, this means that anybody could potentially run away with my car just with the press of a button, but it's a rusty $800 car, I don't really think that's gonna happen. :)
Sounds like a pain. I was gonna say if that didn't work then try jumping the fuel pump relay. It's somewhat dangerous but should work in theory. At least you got it sorted out. Damn safety features
Bruh, don't leave the transponder key intact, that's crazy. Cut the chip out and just leave it instead. That way they'd have to steal it the old fashion way with a hammer and screwdriver. At least make them work for it lol
Keep saying bypassing..when still making use of the fucking original key..thats called how to cheat the inmobilizer on using a non chip key to start the car..by hiding close the original key..
Bypass inplys a defeat of the security installed, And without saying too much a immo programmer for one of those is virtually the same price as a obd2 elm 327 dongle, The only advice i would say if you HAVE to do this is cut the chip out of the key, I suspect it would be a carbon transponder in the middle of the plastic mould of the key, Slice thin layers off the key until you can remove the chip Then just stick that next to the pickup coil, At least that way there is no physical key in the vehicle so a thief would have to hot wire, remove ign switch, break steering lock to start and drive away Rather then ripping the shroud off to do one of the above and find a key and there laughing, Immo systems can be a pain but they are there to try and ensure you car stays where you left it, All good making it easy because you lose keys, but i'm sure if you lost your car because of it, day to day life would be more difficult
You're kidding doing non sence youtuber ,there is no Immobilizer can bypass it's on the ECU ELECTRONIC COMPUTER UNIT ,NOT in the ignition switch , Gas !! Ur dreaming
I don't know what is worse ... The fact he thinks putting another key transponder beside the ignition is bypassing it or the fact 2.2k people liked this video and obviously don't have a clue ... This video is as useless and unnecessary as a video can possibly be...
It works! I lock my car with a manual key. And a manual immobilizer steel bar to discourge thieves. Thanks bud!
people kept sleeping in my car until I put a damn bar on my wheel. for some reason that keeps them out of my car. People are weird, lol. Thank god they left it clean. (The windows were broken, so you could just get in by hand) shitty old corolla.
Well this is not a bypass you still have to have the transponder next to the switch if you bypass it there would be no need for the transponder
Thank you ...best solution to my spare key problem
Nice clear instructions! Thanks for posting!
Oh really, what wer the instruction?
Thanks for this tutorial vedio how to bypass immobilizer key
This was very well made. Damn. What year did they start requiring the keyfob to be right next to the ignition key? I didn't even know they had that shit. That's advanced. Good vid man, ty.
I have a shitty old Corolla that does not require a keyfob (everything is manual, even the windows, lol). Any suggestions on how I can learn to hotwire it? Not interested in theft, moreso for if I get stuck without my key or something. Also it just looks fun, not gonna lie hehe.
Use a Fuqing hammer. There is a special key bypass lead inserted in the Windshield about 11.5" from the base of windshield then measure 14.25" from the edge of windshield. Strike with Small Ball peen hammer no more than 20 oz. and car should start by pressing the emergency brake release button.
@@PinShave what the fuck, cool ty
@@PinShave lolol
😂🤣🤣he said cool thank you🤦♀️😂
That was very good sir
My problem is with toyota picnic sensor key missing
Good job
This is what happens when you show an OG how to use UA-cam. You get videos teaching you how to hotwire cars 🤣🤣🤣
Awesome, saves big bucks if you lose your spare key and need one re chipped. Obviously better for low value cars as the cost of re chipping your car would write it off :-)
exactly. wprst case just install a cheap killswitch and get creative with hiding it. no ones stealing your car if they cant find the kill switch. and if they have time to find the kill switch your cars gunna get stolen no matter what lol
You made it easy for the thieves my friend
Even more for the insurance company. If you got crap modified like this and you car gets stolen and recovered the insurance company will refuse to pay. In other words if your shit gets stolt you better hope it never gets recovered!
They won’t pay anyway, gps in it, find it but rfid capture disable with device. They know easy too steal, banks don’t care more bondage contracts when buy new one. Resell buy as totaled junkyard copart, I saw several clean never in accident, no rebuilt. Can see same look up vins, bet buying stolen. All crooks, said flooded in copart and front was destroyed, ‘like new” in Tampa.
Thanks i stole my first car, 10/10 tutorial
Thanks for getting my sisters car stolen.
Bypass means u should have used the copy key without the chip...
I have a 2018 Tacoma TRD Sport. Do you have a Vidor on Kill Switch? If not, could you please make one. If you don't, could you point me in the right direction?
Thanks
This guy give a idea to the thefs 😂😂😂now the thiefs will look for the key on the key cylinder
y do u have to coil the key and not just lay the black key on top without the coil if it already has the transponder?
This is not a bypass! You are still using the key!
@rodeo o )
Irraz
Not bypassed till you can plug in a new computer or do an engine swap and still work without a crap ton of money for special programmers
If the key is worn get a good locksmith to swap the key chip to another key most of them start at 40 bucks 💡
You probably dont care but does any of you know a method to get back into an instagram account..?
I was stupid forgot my login password. I would love any assistance you can offer me
@Clayton Gunnar Instablaster :)
@Bobby Zachary thanks for your reply. I got to the site through google and im trying it out atm.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
@Bobby Zachary it worked and I actually got access to my account again. I am so happy:D
Thanks so much, you saved my ass :D
@Clayton Gunnar You are welcome =)
So what if the copper around the sensor ripped can i still do this ?
I have a lexus.. Sometimes back the got damaged.. Since then I'm having problems... Nowadays my key is not accepted and if by chance it accepts then it will give one chance and when i try my engine starts and when i accelerate it dies and security light starts blinking and now it will not turn off for min of hour or a day or a week... Wat is d problem in my case
Awesome
Awesome,and you showed it works too,even better,yeah I hate those bs vids they say do this,do that,and you fk around for 30 minutes and dosn,t work.they just like wasting peoples time for a laugh,so cheers and best wishes to you,merry Christmas and a happy new year to all. From,Auckland,New Zealand.⭐⭐⭐⭐⭐👍👍👍👍👍💯
Can you open the door with that key? Thanks.
Hello thank you so much
Where do you live??i wouldnt reccomend this ... actually a thief checks the immobilizer light...
Bro just unplug the whole loom that plugs into the back of the barrel and use a a craft cutter to cut the tape to expose the wires nexts step is find the two mobilizer wires and disconnect them. after you've had done that your see the other 2 two wires that should be the same colour as the ones the moblizer was connected too rejoin them and use tape to put it back together the end
Can you show me how to do this
you gave him bad advice. Your option works on those machines where the receiver is separate from the lock and there is a wire to the antenna around the lock. in his version, this will not work. then you need to open this box and remove the wire from the place where the antenna is soldered. it’s easier to loop the locks from the outside and set aside a few loops on the key. the wire should be looped back. In fact, you need to copy the device of the box of the lineman with ebay or aliexpress. there is still a relay but it is not necessary if you do not use an alarm with a start and two keys with chips.
i did this to my 2002 ford ranger with just the chip. worked great. but the computer did show a constant chip key signal
i tried this with my 2001 toyota highlander, worked, then 2 hours later would not work. im guessing the computer noted the constand signal and shut it down. any ideas ?
The ECU probably learned the fault.. very smart
Great now when the theive trys to hot wire it there will be conveniently placed key in there! As secure as leaving the keys in!
it is out of sight
88 person. Thanks for the tip. I was wondering about that. So it's better if I wrap copper around the key why is that. it activates the chip.
I will try it on my Altima
Bypass is not what you did, in mater fact you complicate it, to really BYPASS without original key you have 2 choices, you got 1 thing right and that is opening the panel, you have to connect 2 wires together and one wire unplug and replug somewhere else, the other way is the computer but even me don't have the experience and tools to do it ( the right way) But in all this why just don't you switch the chip to a replacement key , doesn't cost much at all.
You still needed a chipped key hidden
So basically doing that "bypassing", i can install my remote start without the actual bypassing module then. 😐
Is that by passing??
It does look like it is bypass.He didn`t lie He did show a lot of proof of wires.. It is bypass around the tie wrap and yellow air bag wires.I hate it when UA-camr say it and don`t give proof.
AmeriKKKA 👀👀👀🔥
BlacKKK PanthersSSS lmao what
The all a thief needs for you car is a hammer and a screw driver to start it and you immobiliser off and if ur insurance find out u did this and ur car is stolen the insurance will be void and insurance company won’t pay out
How about just making sure to keep track of your keys so that you DON'T have to keep paying to have new ones made? I never understand people who "lose" all their car keys. 🤷♂️
For any Toyota car
Thanks
Toyota in montclair wants about $800 to make and program and delete old
Not by pass! Still you use that original key bro
fucked up)) bumpkin)))discovered America))) In Russia, about 15 years, half of the cars with the immobilizer ride with the key under the panel with auto start. wrap a few turns of a normal wire on the key, securing it with electrical tape and bring the wire to the desired length by twisting two three turns around the lock. so at least the key can be attached in a remote place and not in plain sight with a lock. although that’s why they’ve turned the lock differently and stole the car without any problems. solves the installation of an alarm "pandora" with the function of reading and sending the code instead of the key with the permission to run when opening from the remote control. although someone needs to be hijacked with their cross-linked engine controller. Only the radio relay in the tank on the fuel pump line will save. but no one canceled the codegrabber))
there is no bypass, you still using the original key chip
He s crazy..!!
Well I am trying to bypass the immobilizer to use a start engine button and the damn immobilizer only gives a signal when it's attached to the lock and with the key in at exactly the right position, nothing else works, you can attach and stick and move around as much as you want, if the key is not in the actual lock at the precise engine start position it doesn't work, what the hell do I do now? :)
I'm in the same boat as you right now. What did you end up doing?
A year late but just take the chip out of the key and super glue it to the key ON position around cylinder on the outside
@@shanedoe7232 Well that sure as hell doesn't work on my car. I think it's engineered with the coil's metal core or something, but it only works with the chip PRECISELY in the same position as it would be when the key is in.
I thought the same, "hey, it's an RFID, coil/chip, big deal, I'll just tape the chip around the coil and I'm done". Won't work in a million years, only in that precise position.
Meanwhile, the coil got damaged anyway in this process, so I ended up buying another ECU/immobilizer/coil/lock/key set and this time I just ziptied the lock with the key in it on the ON position under the steering column.
Yeah, this means that anybody could potentially run away with my car just with the press of a button, but it's a rusty $800 car, I don't really think that's gonna happen. :)
Sounds like a pain. I was gonna say if that didn't work then try jumping the fuel pump relay. It's somewhat dangerous but should work in theory. At least you got it sorted out. Damn safety features
Car will never go to sleep on the battery will die
Bruh, don't leave the transponder key intact, that's crazy. Cut the chip out and just leave it instead.
That way they'd have to steal it the old fashion way with a hammer and screwdriver. At least make them work for it lol
I’m working on Subaru justy 2008 immo problem car not start
sir this trick is not working on my maruti suzuki swift vdi 2013 model. plz give me any other idea
Your readers should be located in a different area from the ignition if not then other videos on UA-cam to try different stuff
@@davidmata20 my car key immobilizer on key barrel.
which type of reader. I dont have any idea about it. Can u tell me plz....
What I did is moved the keys around the ignition an area so it starts. It has to have a sweet spot
@@davidmata20 sir can u make onther video on key immobilizer bypasss... For maruti suzuki car..
For install push start systeam
Sorry sir, it seems like that car always has immobilizer problems, when I look in the web
🤔💯🍻
you still have the stock key
I'm a locksmith and I don't suggest anyone do this it's not smart and your asking to get you car stolen.
So many people saying teeyota instead of toyota
thats my fucking car!!!
Cheap way come on please stevie wonder could do that
J'ai mon véhicule Toyota Isis platana qui peut m'aider à résoudre le problème de by pass
bypass key with key????
There's no way my piece of shit car has a computer in it..
lmao, people are searching this because they dont have a key, not that they want to un antitheft their vecicle to make it easier to steal
\
you tweaking dude
You are joking ? It’s not bypass
Keep saying bypassing..when still making use of the fucking original key..thats called how to cheat the inmobilizer on using a non chip key to start the car..by hiding close the original key..
you are not bypassing anything. wrong name for video
Lol
There is no bypass
That's how you make your car easy to steal..
Bypass inplys a defeat of the security installed,
And without saying too much a immo programmer for one of those is virtually the same price as a obd2 elm 327 dongle,
The only advice i would say if you HAVE to do this is cut the chip out of the key,
I suspect it would be a carbon transponder in the middle of the plastic mould of the key,
Slice thin layers off the key until you can remove the chip
Then just stick that next to the pickup coil,
At least that way there is no physical key in the vehicle
so a thief would have to hot wire, remove ign switch, break steering lock to start and drive away
Rather then ripping the shroud off to do one of the above and find a key and there laughing,
Immo systems can be a pain but they are there to try and ensure you car stays where you left it,
All good making it easy because you lose keys, but i'm sure if you lost your car because of it, day to day life would be more difficult
That is not a bypass.
autel aja 608
How is that a by pass you #@#@
u cheater
You're kidding doing non sence youtuber ,there is no Immobilizer can bypass it's on the ECU ELECTRONIC COMPUTER UNIT ,NOT in the ignition switch , Gas !! Ur dreaming
There’s no purpose of doing this
Not a bypass lmfao
I don't know what is worse ...
The fact he thinks putting another key transponder beside the ignition is bypassing it or the fact 2.2k people liked this video and obviously don't have a clue ...
This video is as useless and unnecessary as a video can possibly be...
Well i thought my mom left the key and i thought i would b able to at least work looked everywherr for it im sure she took it to cancoon