Bohot jhamela hai yaar isko USD forks lagane mein 🤯😳. Damn the headache you went through just to make it better is crazy phenomenal. Requires a lot of passion, technical knowhow and resourcefulness. Hats off to you and your technical prowess to pull this off 👏 🙌
Really, i have been waiting for a 200rv with a USD variant, but you have stepped up and experimented and successfully finished doing a perfect blend of parts in your bike. Glad to come across your channel. All the best bhai!
Good thing TVS didn't update the RTR 200, otherwise we wouldn't have had this gem of a video of modification! TVS should be taking notes regarding the RTR 200, from you brother.. 🖤
Can we install this suspension (tvs ronin) to my Apache RTR 180 BS4 ? Could you please explain me the installation process and pros and cons of this suspension and tell me what spare parts i need. I am ready to change the front alloy too because it's slightly old ❤
I have bs4 rtr 200 and I wanna ask if I can replace my rear suspension with 160's rear suspension. Cause their were good roads were I used to live before but now in this city roads are quite bad . I don't use my bike for long rides on highways.
Bro don't warry for spare parts tvs official store has available tvs genuine parts check it will be helpful to lots and keep rocking bro 🔥🔥 I like ur videos to the apache because I have apache rtr 16 0 4v
@kmperhrvlogs are those available? I have asked tvs service centre they are not sure about spares availability. I m from Kolkata. May I know your total modification cost? Thank you brother for your reply ✌️
My 200 4V suspension has been damaged and the parts have not been made available for 2-3 months now. I want to buy your old forks, any chance you are willing to sell them?
why would you do this, the stock setup of rtr 2004v is so much better than the ronin, this is compromising the bike ridability to improve aesthetics, this mod was absolutely unnecessary
My purpose is mainly sporty touring. I needed more stability and slightly more comfort . Not making a race track machine. Hence went for the ronin forks. Stock 200’s setup is good but for touring and a bit of offroad, ronin forks are a bliss
Bhai I am getting same camshaft issue as you were but the bike I bought from(it's an old bike) and the 1st owner is not conveying it can you please contact me I want to ask some questions regarding that can you please share your insta
@kmperhrvlogs i am getting the sound a little high rpm and them it continues even I lower the speed or gear and also it boosts up when I do engine breaking, Is it same as yours?
You are a true enthusiast bro. Them amount of work you do for all these mods are insane. Love from an Apachean ❤
Thankyou ! More mods coming up 🚀
Ur the only one who is updating rtr 200 not even tvs did that 😢😢😢😢 kudos dude❤❤😊
Tvs just hire him dude.. he’s doing such an amazing job
✌🏼
Bigger Disk doesn't increase stopping power, It will make cooling of the break disks more easy.
Shriniket bhai is competing directly to TVS😁
No comparison 😂
i'm waiting for your video i definitely thought you made that usd fork upgrade hatts off you buddy ❤
@@vishuthakur974 thankyou !
Bohot jhamela hai yaar isko USD forks lagane mein 🤯😳. Damn the headache you went through just to make it better is crazy phenomenal. Requires a lot of passion, technical knowhow and resourcefulness.
Hats off to you and your technical prowess to pull this off 👏 🙌
That’s the reason ! Such projects are fun for us
Really, i have been waiting for a 200rv with a USD variant, but you have stepped up and experimented and successfully finished doing a perfect blend of parts in your bike. Glad to come across your channel. All the best bhai!
Thankyou !
I also wanted to do the same thing but I didn't had a proper illustration how I can do that but you have done that thank you ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
This is what i was looking for!!! awesome!!!
Most awaited video will buy asap ♥️
Long awaited video ❤❤❤❤
I thought and you done it. Well done brother.
Glad you like it!
Good thing TVS didn't update the RTR 200, otherwise we wouldn't have had this gem of a video of modification! TVS should be taking notes regarding the RTR 200, from you brother.. 🖤
Glad you liked it!
Bro not stopping 🔥🔥🔥🔥 TVS ko takkar
🚀
Thanks You Shreeniket For Installation of Usd Forks ❤
Excellent knowledge....Excellent communication.....Excellent explanation.....Excellent videography....you have came long way....buddy...🎉😊
Thank you so much for the appreciation!
You are truly different man. ❤❤
Was waiting for this❤❤
This channel is so underrated 😮
Take it to the next level. Swap out the crank assembly from ronin to your bike for 225 cc displacement.
Thanks ! Won’t touch the engine before the warranty runs out though
keep it up bro you rocks 😄😄
Where can I buy TVS Ronin forks? It's not available in my area
❤Much needed upgrade for 200 4V.
💯
Nice work man.
Please do make some videos on TVS Ronin as well. I would really like to do some nice modifications on my Ronin 😊
Maybe in the future!
Please share info for sourcing the parts as it is tough with tvs, great job with the video man🎉
@@acharyaashish-j2l thankyou ! Just visit local TVS SC, place an order for all the parts mentioned
excellent work bro bike looking superb 😘
Glad you like it.
Good efforts bro. Hats off. But i think it'll be more easy if u use rtr 160 usd's
Hats off to your work bro😮
Thank you!
Can we install this suspension (tvs ronin) to my Apache RTR 180 BS4 ? Could you please explain me the installation process and pros and cons of this suspension and tell me what spare parts i need. I am ready to change the front alloy too because it's slightly old ❤
Kya iss usd me RTR ka stock clipon handle use kar sakte hay??
Can you install 100 section alloy rim on front? This is the big cons for me on Apache.
Yes . You can install ronin alloy
I have Apache 160 4v can I also change the front suspension from frok to USD as you guided step by step?
I have bs4 rtr 200 and I wanna ask if I can replace my rear suspension with 160's rear suspension.
Cause their were good roads were I used to live before but now in this city roads are quite bad .
I don't use my bike for long rides on highways.
@@nishantgurjar7232 it’s the same suspension
Can we use that stock forks seal cover on other bikes?
No
I am following you before purchasing my 200 4v. You are genius. Let us know what is the feedback of this USD folks, i am also interested..
Thanks for the support ! Forks have improved ride quality, handling. Totally worth !
I own the Apache RTR 160 4V telescopic forks version. Can it be upgraded to the USD forks version?
@@Arnab4350 yes , go for 160 4v USD forks
Much waited video
Can it be done on 160 2v bs4 please tell bhaiya
Amezing video 👏
@@gourabdatta610 thankyou !
Hi. Can you tell me if I want to extend my bike accelator cable, then which bike accelator cable will be the best suited for my Apache 160 4v bs6
TVS Raider accelerator cable
Can You please make a video To upgrade back Sheet of apache RTR 1604v because after 20-25k its very uncomfortable.
Can usd forkes work with original stock handel
@@JourneyWithDanny no it’s not possible
Ek din tum apache me inline 4 engine bhi laga doge mujhe bharosa hai😅
Please sponsor 😂
Bro don't warry for spare parts tvs official store has available tvs genuine parts check it will be helpful to lots and keep rocking bro 🔥🔥 I like ur videos to the apache because I have apache rtr 16 0 4v
Local TVS SC helped a lot for this mod
@kmperhrvlogs frent fendar is 160 4v will set I think u can try it bro
Can we Adjust Handle bar a bit downwards ?
I'm also thinking to Install this in my Bike but i want a sporty postion like The stock ones have ..?
Yes . Don’t install risers like I have done
This is really good. BTW can we install ronin front disc plate in bs6 apache 160 4v with stock fork setup?
Not possible with stock fork setup
Awesome man
Bro how can we install ronin disk plate in rtr 200 4v. I just want to improve braking on Rtr 200 4v stock suspension in low cost.
Can’t do with stock suspension
Great man....can you make a top t plate for ns200
Fabulous video brother, can I upgrade my rtr 160 4V front suspension like you??
Kindly do respond.
Sir Apache 200 ka fully restore karna he, pune me kidhar accha he, aap boliye
SK auto wakad
@@kmperhrvlogs thank you sir
Will this work on the Apache 160 4v
@@solomonraja4722 use USD fork setup from the 160 4v
TVS actually ignoring this beautiful bike , and the nicest engine in their lineup 😔
Engine is 💯
I am a owner of a 160 4v bs4 but I want upgrade to 2004v but tvs focusing in 160 4v
Sar aapane purane sokar ka kya Kiya mujhe jarurat hai unki
I can’t sell original parts
Just crazy
Brother I also want to install USD forks...but I want to keep the stock handle bar...Is it possible in anyway?
No it’s not possible
Please..if someone can answer my question.. (Does drilling hole in axle for fork protectors weaken its strength??)
Do not drill holes in the axle . It’s dangerous
@kmperhrvlogs thanks for your response.. I just had doubt about it.
I want to do the same with my 160 4v 2021 model. Can you help me brother 🙏
Directly install new 160 4v forks.
@kmperhrvlogs are those available? I have asked tvs service centre they are not sure about spares availability. I m from Kolkata. May I know your total modification cost? Thank you brother for your reply ✌️
Bro do guide on same for 160 4v bs6.
You can directly install new 160 4v forks
@@kmperhrvlogs kuch or parts change krne ki jrurt pdegi usme ya direct ho jyga..???
How much will be the cost for Apache RTR 160 4V XConncet version? And whose stock parts need to be replaced for 100% perfection?
Is it fit on 160 4v and what will the cost for that
Install new 160 4v’s usd forks
@kmperhrvlogs how much will be the cost I have last year model of 160 4v dual abs
Wt is Price for handlebar riser
Please dm @kph_moto_
My 200 4V suspension has been damaged and the parts have not been made available for 2-3 months now. I want to buy your old forks, any chance you are willing to sell them?
I won’t sell the original parts bro
I am having a hard time sourcing new front forks in Pune. Any chance if you could you help me in sourcing new set of front forks ?
@@the_xibalba contact Mahalaxmi TVS shewalewadi pune
Bro how much money spent on usd setup total cost
28-30K
Usd forks price
Watch till the end of the video. I have shared all the details
Bro if you have the old fork assembly ill buy it, if you can revert that will be more helpful
I can’t sell old forks
🔥🔥
I guess ronin ke 43 mm nai 41 mm hai usd forks. Please check it carefully!
You are right! I was a little off on the size.
What is the cost
Watch till the end !
Make video for wheel sticker design proper size and design unique.
Coming up
Ronin usd fork not 43mm its 41mm
Correct! 41mm is the correct size.
Tight tight tight
🤔
2025 apecha 200 is coming new model
why would you do this, the stock setup of rtr 2004v is so much better than the ronin, this is compromising the bike ridability to improve aesthetics, this mod was absolutely unnecessary
My purpose is mainly sporty touring. I needed more stability and slightly more comfort . Not making a race track machine. Hence went for the ronin forks. Stock 200’s setup is good but for touring and a bit of offroad, ronin forks are a bliss
🥹 bro, rulaoge kya? Company ko dena chahiye tha yaar. ek achhi bike ko maar ke rakhha hain... 6th gear aur usd itna hi to maange hain tvs se...😢
Abe hindi me bolo yrr😂😂😂
A lot of my subscribers are from South too who don’t understand Hindi. Hum Hindi + English manage kar sakte hai.
Maqsad music
bhai kitna paisa lgayega ispe... 😂 pehle affordable sochke lelo... fir customize karo... kispe faida.. mahanga bike lene pe❓saata bike ko customise karane pe❓
Mehnga bike lene me. Customize karne me jyda paisa lagta hai aur resell value bhi wahi rehta hai.
It not about buying premium / normal bike. Buying a bike gives one time joy . Modding it , going on rides is the true fun of biking / motorcycling .
But why tvs didn't give upadet to 200 😶..
Checkout previous video
Bhai I am getting same camshaft issue as you were but the bike I bought from(it's an old bike) and the 1st owner is not conveying it can you please contact me I want to ask some questions regarding that can you please share your insta
Change camshaft, rockers, valves
@kmperhrvlogs i am getting the sound a little high rpm and them it continues even I lower the speed or gear and also it boosts up when I do engine breaking, Is it same as yours?
🫡true enthusiast
We all are !
wait kiya tha is k liye jab se bike liya h 🥹 finally .. Thanks ❤
Total cost ?
Thanks ! Total ₹28-30k