ICS® 695XL vs Cut-n-Break - Floor cut

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 5

  • @johnsheppard9827
    @johnsheppard9827 4 роки тому +5

    Hello, I have a cut n break and have already cut a few meters. To get the middle bridge out I use a caulking hammer, I cut the hole in 35 minutes there. Two Cut n Break blades costs about 200 euro, a chain costs about 600 euro. Both have its pros and cons, the chain saw I would use only for small details and the cut n break for bigger. Cheers

  • @Appytail
    @Appytail 2 роки тому +2

    I can only recommend to use MUCH MUCH MUCH MUCH more water than what's shown here for the ICS. Terrible chain and bar life. But sometimes, it's the only tool that will do ... The guy who does the Cut & Break, is clearly not the fastest on earth ...

  • @legrandsacmagic
    @legrandsacmagic 4 роки тому +5

    No rebar! I've used both on 32mm reinforced concrete. Ics bars and chains are terrible!

    • @perforacionenhormigon
      @perforacionenhormigon 4 дні тому

      estimado ud recomienda esta cortadora manual, que valor sale ?

    • @legrandsacmagic
      @legrandsacmagic 4 дні тому

      If all you are cutting is concrete with a 16 mm rebar, then it is probably okay. Beyond that, I would go with the Husqvarna K4000 cut and break or be prepared to replace the bar and chain due to deflection, even if used with the additional rail system.