Hello! I hope you have had a fun and creative day. I just got to sit down to watch your video. I just want you to know that I enjoy your channel content and always find it interesting. I hope you have a wonderful week ahead. Thank you for sharing your video and your talent.
It worked!!!! I just bought a 325 and your video worked perfectly. I didn’t have a single issue setting it up or registering the My Connection. Thanks!
Thanks for a great video - you make it so simple to connect Luminaire to ScanNCut and ScanNCut to Luminaire. Looking forward to more videos involving Luminaire and ScanNCut in the future!!!
So glad you got this Scan n Cut. I have the sdx330d and have hardly used it. Love all your tutorials and I know I will learn a lot from you, once you start doing tutorials with your Scan n Cut and the Luminaire.
Thank You very much for this tutorial. I'm not sure I could have my XP3 and SDX325 talking to each other without your wonderful step by step instructions,
Love this!! I was blessed to get a 330D. Bummed it won’t connect with the Solaris like it does the Luminaire but excited to watch more from your projects.
Becky, thank God you did this video. I followed it to set up my new scan and cut. Don't think I would have been able to figure it out otherwise. Thanks so much!!!!
Becky, Thank you for the great demonstration. I just bought the SDX330D and I have a Luminaire with 1 & 2 upgrades. I watched your program, connected the machines, but it did not work until I went through the connection process on Luminaire to connect with CanvasWorkspace. That was easy. Thing I learned was that on the SNC I did not retrieve the design from the lower left corner where it says “Retrieve data”, instead we have to press the < (back arrow) to go to connection with photo of sewing machine to retrieve. Once you do it , it is easy and wonderful for these machines to talk to each other. I also look forward to using SNC to make designs and cut data and send to Luminaire to make designs. Thanks again.
Love, love, love your preview of the new SnC! Thinking about upgrading from my 230DX. And where oh where did you have your sign created with the Power Tools with Thread at? Oh my I adore that!,
Would you believe that my sign came from a FB ad? I can't recall the store. You really only would want to upgrade theSDX 230 if you have a Luminaire so you can use the MyConnection feature with the either the SDX325 or 330D. Otherwise, you really don't need to upgrade. :) Save your pennies for fabric. LOL
Can't tell you how happy I was to see your unboxing yesterday!!! I purchased the SDX330D in December and have been looking for some great tutorials on this. I can hardly wait to use this machine more. I also have the LUMI 1 with the upgrades. Thanks for all the great videos.
I just ordered this scan and cut yesterday and was so pleased to see this video as I am not a techy thank you for your videos I do not have this luminaire machine but am thinking about it I am just not sure I would use it enough to justify the purchase but I do love applique
CONGRADULATIONS ON YOUR NEW SCAN N CUT! YOU DESERVE IT FOR ALL YOU DO FOR US! WHAT VERSION NUMBER SOFTWARE DO YOU HAVE TO HAVE TO HOOK UP TO THIS SCAN N CUT? 😊😊😊😊
Thanks Becky for the detailed instructions. I just upgraded to a new Scan n Cut SDX325. I’m confused about the two Canvas Workspaces you mentioned. I’m not sure which one I have. How can I determine which one I’m using, and is one better to have than the other version. Thanks
I bought this model a couple of months ago. I had only set it up to use without the wifi connection. Your demo was perfect! Your instructions were so easy to follow. Thank you,
Becky I wish I would have checked out alll your videos for scan n cut, unboxing and connecting. I would not of let my puppy eat those papers. Turns out it was the activation code for scan n cut. An I hate to say this but Brother support is never there. And o brother dealers in Long Island, NY, very frustrating. So thank you!
Blurring after the fact on YT isn't an option, so I went ahead and whacked out that part of the video. I'm not sure what could happen if anyone else used that code on their machines, but better safe than sorry right? :) Thanks!
Becky, just got my sdx 325 and unboxed it - looked at some of the icons and tried to find videos for my machine - found others for different machine - but now that I've found yours I think I can manage getting it set up with no issues - after watching this unboxing video I do not have a Brother embroidery machine but I have a Bernina 880+ (which has wifi) can I still connect to my Bernina machine? Thanks in advance looking forward to the rest of the videos
I have a scan n cut sdx230D I believe... I have not taken out of the box because I do not know how to use. I am hoping these are close - so that I can follow you and learn.
I scanned an image on my scan n cut 325 and added it to sent to canvas workspace and it not showing anything on canvas -- yes I'm all set I did all the same steps you did in your video I'm not sure what else to try
Would it also talk to my Brother Quattro 3? I have a photo of a patch that was created by a Papason from Vietnam in 1970 for members of the small 8 member landclearing team out on the Cambodian border. I would love to recreate the patch not just have a photo. I am told that it would be possible to do with the newest model SNC.
The SNC uses My Connection to 'talk' to certain models of Brother machines. My Connection is not available for the Quattro series. I'd recommend contacting I digitizer I use to recreate the patch. She's very good and digitizes by hand. She's out of British Columbia and is very reasonable. Her website is artembroidery.ca/
Yes, but in different ways. As far as I know, it can connect directly to any machine that can be upgraded with the MyConnection feature. If a wireless machine doesn't support MyConnection, it can be done with the Artspira app.
ridiculous my connection only works with the luminareseems strange to cut out so many other customersthat have wifi capable machines. I do have this machine hoping one day that will realize their mistake and make an upgrade to work with more machines🤞
The SNC and the Luminaire are made by the same company (Brother) so they are able to configure the wireless language in both of them so they are able to communicate with each other. Brother doesn't have the rights to the proprietary computer technology in other machine brands. However, you bring up a good point. Perhaps one day a third party company will create a utility that can bridge the gap between the SNC and other machines just like Embrilliance did to be able to send embroidery designs wirelessly to the Luminaire and Baby Lock machines. Also, other brands may not want the SNC to communicate with their machines for some unknown reason. Many companies are VERY protective of their technology and are unwilling to allow external communications with brands outside of their own. If you're talking about Brother making the My Connection available to other Brother machines, I would bet that if the demand is there, they will create a way to make it happen to other wifi capable machines.
@@PowerToolsWithThread I have a Brother Stellaire, it is made by Brother just like the scanncut. It is wifi capable and can do many of the same things as the luminare. It has a 9.5 x14 hoop capability and no built in scanner or projector. You have to use the app. Brother is more than capable of including other wifi machines to my connection it makes no sense that they only set it up to work with the luminare. Not everyone has a luminare and it seems they would want to sell new scanncuts. Hopefully you are right and they will figure it out. I'm excited to see your new scanncut in action 😁
How can we connect a scan n cut 330D if we no longer have that activation card number. I had my cutter for a while and had no idea what it was or think that I would need it later for my embroidery machine when I they made my connection available for the stellaire xj1,. Any thoughts on how I can still do the my connection without the card?
I would check with a Brother dealer that is also an authorized service center. I know Allbrands is a service center so you might call them and ask. I poked around on the internet and didn't have much luck. You might be stuck with just using a USB to transfer designs. Sorry.
Thanks for trying to find info, I haven’t been able to find anything either. I just purchased my new Stellaire from Allbrands so I will contact them. Thanks
I found my card! I was able to follow your directions on this video and everything is now working. I am so happy Brother decided to include the Stellaire in MyConnection. Thank you so very much for your attempts to help me with this. Almost forgot to add where I found the card, in the compartment inside my scan n cut with my tools. 🤭
After surviving Hurricane Ian, I just set up my scan n cut SDX325 by filling your video. Becky, you rock! Thanks so much for the video.
Hello! I hope you have had a fun and creative day. I just got to sit down to watch your video. I just want you to know that I enjoy your channel content and always find it interesting. I hope you have a wonderful week ahead. Thank you for sharing your video and your talent.
It worked!!!! I just bought a 325 and your video worked perfectly. I didn’t have a single issue setting it up or registering the My Connection. Thanks!
Thanks for a great video - you make it so simple to connect Luminaire to ScanNCut and ScanNCut to Luminaire. Looking forward to more videos involving Luminaire and ScanNCut in the future!!!
So glad you got this Scan n Cut. I have the sdx330d and have hardly used it. Love all your tutorials and I know I will learn a lot from you, once you start doing tutorials with your Scan n Cut and the Luminaire.
I’m so excited. I got my new scanncut today to. This is so timely. Thank you and will look forward to your tutorials.
Hope you enjoy it!
Looks amazing!! Can't wait to see you play with it!!
Congratulations on your new Scan N Cut. Enjoy! I cannot wait to see your videos using this new machine.
Thank You very much for this tutorial. I'm not sure I could have my XP3 and SDX325 talking to each other without your wonderful step by step instructions,
So happy for you have fun!!
Thank you Becky for showing this.
You saved me Becky, as I think I have fully registered my new SDX225F, but will find out when I take the SMP Scan n Cut classes next week!
You always so happy with the best personality
Great information. Thanks!
Congratulations on your new toyl
OMG…that worked…thank you for recommending this video Becky! You’re the best!
I’m glad you are connected!! now you are ready to go!
Been thinking of buying a scan and cut and upgrade my embroidery to the luminaire 2. Waiting to see how all that you can do. No pressure. Love ya.
Congratulations on your new baby! Very easy to set up. I do not have one as yet, but soon !!
Thank you so much Becky, I just got a scan n cut 325 and needed your help.
I watched you over and over again, I don't think I could have done it with out your help.
Love this!! I was blessed to get a 330D. Bummed it won’t connect with the Solaris like it does the Luminaire but excited to watch more from your projects.
Love this scan and cut, congratulations
Becky, thank God you did this video. I followed it to set up my new scan and cut. Don't think I would have been able to figure it out otherwise.
Thanks so much!!!!
Glad it was helpful!
Thank you so much, Becky! I had all these pages in different languages; however, nothing showed how to set up the network! Bless You!!!
Becky, Thank you for the great demonstration. I just bought the SDX330D and I have a Luminaire with 1 & 2 upgrades. I watched your program, connected the machines, but it did not work until I went through the connection process on Luminaire to connect with CanvasWorkspace. That was easy. Thing I learned was that on the SNC I did not retrieve the design from the lower left corner where it says “Retrieve data”, instead we have to press the < (back arrow) to go to connection with photo of sewing machine to retrieve. Once you do it , it is easy and wonderful for these machines to talk to each other. I also look forward to using SNC to make designs and cut data and send to Luminaire to make designs. Thanks again.
Love, love, love your preview of the new SnC! Thinking about upgrading from my 230DX. And where oh where did you have your sign created with the Power Tools with Thread at? Oh my I adore that!,
Would you believe that my sign came from a FB ad? I can't recall the store. You really only would want to upgrade theSDX 230 if you have a Luminaire so you can use the MyConnection feature with the either the SDX325 or 330D. Otherwise, you really don't need to upgrade. :) Save your pennies for fabric. LOL
Can't tell you how happy I was to see your unboxing yesterday!!! I purchased the SDX330D in December and have been looking for some great tutorials on this. I can hardly wait to use this machine more. I also have the LUMI 1 with the upgrades. Thanks for all the great videos.
Yay! We can do this together. :)
I just got my 325 yesterday. Thank you for this tutorial. It made set up easy. i only wish it would work with a Babylock Destiny II.
Enjoy!
Becky. Thanks for all info’ you give us. 0ne question: the little paper on my sdc325 has 3 activation codes. Which do I use to connect to Luminaire?
I just ordered this scan and cut yesterday and was so pleased to see this video as I am not a techy thank you for your videos I do not have this luminaire machine but am thinking about it I am just not sure I would use it enough to justify the purchase but I do love applique
So happy for you,enjoy your new toy. ❤️
Thank you , such a clear and instructive video; armed with a cup of tea and a biscuit, I found the lesson really interesting !
CONGRADULATIONS ON YOUR NEW SCAN N CUT! YOU DESERVE IT FOR ALL YOU DO FOR US!
WHAT VERSION NUMBER SOFTWARE DO YOU HAVE TO HAVE TO HOOK UP TO THIS SCAN N CUT?
😊😊😊😊
Congratulations!!!!!!
Thanks Becky for the detailed instructions. I just upgraded to a new Scan n Cut SDX325. I’m confused about the two Canvas Workspaces you mentioned. I’m not sure which one I have. How can I determine which one I’m using, and is one better to have than the other version. Thanks
Great tutorial. Can’t wait to see how this all works.
I love mine! I own a Husqvarna Sapphire so I don’t get to enjoy the wireless connection to my machine. But love this machine.
I bought this model a couple of months ago. I had only set it up to use without the wifi connection. Your demo was perfect! Your instructions were so easy to follow. Thank you,
Thank you!
I just purchased a new Brother Stellaire XJ1 and I got the new Scan and Cut SDX325. So I need your video so I can set this up
Great directions even thou I don’t have the new scan n cut
Thank you!
Love your videos. You make everything so easy to understand. Can't wait for my Scan N Cut to arrive....
Becky I wish I would have checked out alll your videos for scan n cut, unboxing and connecting. I would not of let my puppy eat those papers. Turns out it was the activation code for scan n cut. An I hate to say this but Brother support is never there. And o brother dealers in Long Island, NY, very frustrating. So thank you!
Thank you Becky! Just bought the scan n cut and Luminaire 2. This helps so much!
Congratulations!!!
I am still using my 650 which is sufficient for me, love the scan n cut
I love my 650 too!
Was the activation code on the screen of the luminaire? If So, you might want to blur that out too.
Blurring after the fact on YT isn't an option, so I went ahead and whacked out that part of the video. I'm not sure what could happen if anyone else used that code on their machines, but better safe than sorry right? :) Thanks!
Thank you very helpful, I just got one.
Thinking about this combo, your video is very timely. Will it work with my Babylock?
Right now, Baby Lock doesn't have the My Connection utility or anything like it that I'm aware of (June 2022).
Thank you so much without your help, I would have given up installing my new scan n cut
Becky, just got my sdx 325 and unboxed it - looked at some of the icons and tried to find videos for my machine - found others for different machine - but now that I've found yours I think I can manage getting it set up with no issues - after watching this unboxing video I do not have a Brother embroidery machine but I have a Bernina 880+ (which has wifi) can I still connect to my Bernina machine? Thanks in advance looking forward to the rest of the videos
I just love your videos! You make everything look so easy!! I’m inspired! 🤩🤩🤩
Thank you very interesting 😊
Will this “talk” to a Baby Lock Solaris II?
I have a scan n cut sdx230D I believe... I have not taken out of the box because I do not know how to use. I am hoping these are close - so that I can follow you and learn.
Search my channel for ScanNCut videos. I have a playlist showing the SDX225 which is almost identical to yours. Lots of great info there!
Thank you for sharing. I have a Cricut and a Baby Lock Embroidery Machine, but did not have any experience with your system. 💜💜💜 AuntieEllen
You give very good demo’s 🎉
What if you don’t have a luminaire? Can you still use the brother scan and cut?😊
Absolutely!
Will this work with my brother 1055x machine?
At the present time, the My Connection option isn't present on the PR1055, but who knows? :) Maybe one day!
I scanned an image on my scan n cut 325 and added it to sent to canvas workspace and it not showing anything on canvas -- yes I'm all set I did all the same steps you did in your video I'm not sure what else to try
Did you register your machine with Canvas? Look in your account on Canvas to make sure you can see your machine.
@@PowerToolsWithThread yes to both. I was using the online version and it doesn’t show up but does on download version
Thank you
A Great tutorial! Will this work with the baby lock Altair ?
Not at the moment. Your machine needs to have My Connection (or something like it) in order to connect to the SNC.
can this machine only talk to the brother luminaire?
Right, it doesn't 'talk' to the Baby Lock comparable machines (that I'm aware of).
Would you think of selling your older scan and cut???
Don’t have a scan and cut yet , but sure would love to have it.
I will be selling my old CM650 once I get it and the mats all cleaned up and ready to go. I'm keeping my SDX225. The 650 still works great!
@@PowerToolsWithThread would love that. Any idea how much, so I can start saving?
Would it also talk to my Brother Quattro 3? I have a photo of a patch that was created by a Papason from Vietnam in 1970 for members of the small 8 member landclearing team out on the Cambodian border. I would love to recreate the patch not just have a photo. I am told that it would be possible to do with the newest model SNC.
The SNC uses My Connection to 'talk' to certain models of Brother machines. My Connection is not available for the Quattro series. I'd recommend contacting I digitizer I use to recreate the patch. She's very good and digitizes by hand. She's out of British Columbia and is very reasonable. Her website is artembroidery.ca/
Do you have to have the Luminaire 2 or 3 to use the Scan n Cut SDX325?
Will this work with any brother embroidery that has wireless?
Yes, but in different ways. As far as I know, it can connect directly to any machine that can be upgraded with the MyConnection feature. If a wireless machine doesn't support MyConnection, it can be done with the Artspira app.
what is the kit1, 2, and 3 about? Thanks
Thank you great help
How do I change pdf to scan and cut
Do you know if this will work with the Brother Stellaire?
I need a refresher as to how the communication works. I tried it recently and got all messed up.
ridiculous my connection only works with the luminareseems strange to cut out so many other customersthat have wifi capable machines. I do have this machine hoping one day that will realize their mistake and make an upgrade to work with more machines🤞
The SNC and the Luminaire are made by the same company (Brother) so they are able to configure the wireless language in both of them so they are able to communicate with each other. Brother doesn't have the rights to the proprietary computer technology in other machine brands. However, you bring up a good point. Perhaps one day a third party company will create a utility that can bridge the gap between the SNC and other machines just like Embrilliance did to be able to send embroidery designs wirelessly to the Luminaire and Baby Lock machines. Also, other brands may not want the SNC to communicate with their machines for some unknown reason. Many companies are VERY protective of their technology and are unwilling to allow external communications with brands outside of their own. If you're talking about Brother making the My Connection available to other Brother machines, I would bet that if the demand is there, they will create a way to make it happen to other wifi capable machines.
@@PowerToolsWithThread I have a Brother Stellaire, it is made by Brother just like the scanncut. It is wifi capable and can do many of the same things as the luminare. It has a 9.5 x14 hoop capability and no built in scanner or projector. You have to use the app. Brother is more than capable of including other wifi machines to my connection it makes no sense that they only set it up to work with the luminare. Not everyone has a luminare and it seems they would want to sell new scanncuts. Hopefully you are right and they will figure it out. I'm excited to see your new scanncut in action 😁
How can we connect a scan n cut 330D if we no longer have that activation card number. I had my cutter for a while and had no idea what it was or think that I would need it later for my embroidery machine when I they made my connection available for the stellaire xj1,. Any thoughts on how I can still do the my connection without the card?
I would check with a Brother dealer that is also an authorized service center. I know Allbrands is a service center so you might call them and ask. I poked around on the internet and didn't have much luck. You might be stuck with just using a USB to transfer designs. Sorry.
Thanks for trying to find info, I haven’t been able to find anything either. I just purchased my new Stellaire from Allbrands so I will contact them. Thanks
I found my card! I was able to follow your directions on this video and everything is now working. I am so happy Brother decided to include the Stellaire in MyConnection. Thank you so very much for your attempts to help me with this. Almost forgot to add where I found the card, in the compartment inside my scan n cut with my tools. 🤭
@@kathymckernan7378 YAAAY!!! That's awesome! Yes, it's great that MyConnection is on the Stellaire too. Have fun!
Will this work with a Stellaire?
Not yet! Hopefully Brother makes this available to their other wifi-capable machines. :) Let your dealer know you want it!
Thanks!
Thank you Maureen for your super sticker! I appreciate it!
That is so dang nice congrates
Super cool
I have an 85s and it never connected to Wi-Fi 😢😢😢😢
❤️❤️❤️
Funny. My middle name also along with my partners. 😊
Does this new SNC talk to my Stellaire?
Not yet! Hopefully Brother makes this available to their other wifi-capable machines. :) Let your dealer know you want it!
Are they your TAPE SCISSORS or FABRIC SCISSORS? 😊😉
Guuurllll.... SERIOUSLY?? LOL