Power transmission through Belts and Ropes

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 82

  • @calebbosire2110
    @calebbosire2110 4 роки тому

    You did it the best way possible.Thank you sir

  • @supersissyandsupermommy5099
    @supersissyandsupermommy5099 5 років тому

    What ab awesome video! This helped me understand because you explain each section piece by piece and then explained the use and function of each piece. Thank you so much!!!!!! Im learning how to work on a car so i can understand warming signs and stuff if my car. My car is 16 years old and has 245k mi and it over heated on me recently and i PANICKED! i had no idea what was wrong so my husband is teaching me but i don't understand anything he is talking about its like another language so i been on youtube for hours a day learning from videos like yours. I truly appreciate your video!!!! Thank you so much!!

    • @EngineeringMechanicsbyaryan
      @EngineeringMechanicsbyaryan  4 роки тому

      OK, thank you for your comment and advice. It's really great of you that you put much effort to read the comment which was one year ago. But I dint like the word bhik that u used. Many ppl are asking fund to support their channel. If you are ready to give reply to all of them, your lifetime is not sufficient. I request you to give suggestions in positive way which motivates...

    • @IAmAnAlbatross...
      @IAmAnAlbatross... 4 роки тому

      @@EngineeringMechanicsbyaryan its great to see you active on comments. yes I do try to read those comments having replies. you take my word in other form than its meant for. yes it looks begging if are replying people personally for fund. if you need funds, yes all we do, plz explain it only in your videos @ beginning, middle or end / ask them to join will be better approach. plz don't do individually.

    • @EngineeringMechanicsbyaryan
      @EngineeringMechanicsbyaryan  4 роки тому

      OK, I will do it as you said in my future videos. Thank you...

  • @Zucsebe
    @Zucsebe 5 років тому +1

    11:35 tight side should always be at lower side because if it is at upper half the slack side at lower portion will have low angle of wrap which will increase slip. So less power generated.

  • @MechanicalEI
    @MechanicalEI 5 років тому +1

    Sir, Great Video. The illustration and example of Power transmission was perfectly supported by your explanation. Thanks for uploading!

  • @hindustani907
    @hindustani907 3 роки тому

    Very nice

  • @sahlasuhail.psahla8358
    @sahlasuhail.psahla8358 3 роки тому

    The centrifugal tension in belts
    [A].increases power transmitted[B].decreases power transmitted[C].have no effect on power transmitted[D].increases power transmitted upto a certain speed and then decreases

  • @miguelzavala5449
    @miguelzavala5449 6 років тому

    quiet good explanation. Simple and easy to understand... congrats

  • @indrasenareddy7582
    @indrasenareddy7582 6 років тому +1

    This video helped me a lot and gave Clear cut information

  • @bijaydhali4517
    @bijaydhali4517 4 роки тому

    nice class

  • @poppinravi
    @poppinravi 5 років тому

    Amazing video
    And very good explanations
    Plz make some more videos on these kinds of topics

  • @prudhvivenkatch3608
    @prudhvivenkatch3608 7 років тому +2

    which 1 is more efficient? rope drive or belt drive?

  • @maryamzaid4022
    @maryamzaid4022 3 роки тому

    What about number belts used , ?? Instead of one belt we use two belt to drive the same pulley then what happened

  • @prasadnakade8267
    @prasadnakade8267 3 роки тому

    Nice teaching sir.

  • @roshanpatel4216
    @roshanpatel4216 5 років тому

    Awesome sir!

  • @VikasKumar-xk4zg
    @VikasKumar-xk4zg 6 років тому +1

    Very nice bro make more vedios.

  • @rcart5253
    @rcart5253 3 роки тому

    Nice sir please tell how to find timing belt length and how to use for pulley

  • @Demon-gq7io
    @Demon-gq7io 3 роки тому +1

    Bro how can we buy that

  • @palakeetisrinivasarao6417
    @palakeetisrinivasarao6417 6 років тому +2

    In what situations we use open belt drive and cross belt drive

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      Sometimes you want different DIRECTIONS for the rotation so if you want both clockwise and anti clockwise then cross belts are used

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      Sorry for the 1 year late reply because I just saw your comment today! I suppose you must have already passed your exam by now!

  • @ranababu9095
    @ranababu9095 6 років тому

    very nice video...

  • @creativelalit007
    @creativelalit007 4 роки тому

    how we can decide distance between two pulleys.

  • @bhanuprakash5208
    @bhanuprakash5208 4 роки тому

    Super bro

  • @nitantchhajed5096
    @nitantchhajed5096 4 роки тому +1

    koi medicaps college indore wala hai yaha ? lol. BTW great video

  • @DEEPAKKUMAR-fp6lj
    @DEEPAKKUMAR-fp6lj 7 років тому +1

    I have a question
    The power developed by a shaft rending at N rpm transmitting torque T kgm is ........... kw

  • @ajijmujawar694
    @ajijmujawar694 5 років тому

    Hello in this video you show the driver is in small size as compared to driven pulley how is it possible?

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      You need this becaue the motor with small pulley is high speed and driven CAN be lower speed because the pulley is larger

    • @ajijmujawar694
      @ajijmujawar694 5 років тому

      @@MusicWorld-zy6dl means if I require slow speed at driven we have large pulley on driven

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      @@ajijmujawar694 yes you can precisely control speeds by the size and diameter of each pulley

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      just like if you have a fast small gear driving a large gear, then the large gear turns slowly

    • @MusicWorld-zy6dl
      @MusicWorld-zy6dl 5 років тому

      thats how you REDUCE speeds becaue sometimes you need slow speeds

  • @ssenyangeraymod2047
    @ssenyangeraymod2047 Рік тому

    Thx u sir

  • @yoyosunita3430
    @yoyosunita3430 5 років тому

    If we have to cover 8 m distance between too shaft .....which type of belt required....nd why?

  • @MohanLal-dj1xg
    @MohanLal-dj1xg 5 років тому

    Nice

  • @khushbukhatarkar3446
    @khushbukhatarkar3446 5 років тому

    Slip ke karan kya hota hai plz bata sakte ho

  • @rohitmeena3808
    @rohitmeena3808 6 років тому

    Thanks buddy

  • @farheenahmed969
    @farheenahmed969 5 років тому

    Nice explanation

  • @somasekharkalla3657
    @somasekharkalla3657 6 років тому +1

    Please keep slides ppt
    in description to download

  • @atifshaikh43
    @atifshaikh43 7 років тому

    Nice video

  • @MS-xs2ts
    @MS-xs2ts 6 років тому +1

    You said not more than 10m for flat, nearer for V and more than 5m for circular belt. I’m trying to understand what’s the actual difference here🤔🤔🤔🤔

    • @irfanqureshi473
      @irfanqureshi473 5 років тому

      If less than 8m we used flat belt and if distance is more than 8m we used circular belt... and if distance is less than 1m then used V-belt.

  • @ramueppili5223
    @ramueppili5223 4 роки тому

    Sir
    Why using belts instead of couplings

  • @indrasenareddy7582
    @indrasenareddy7582 6 років тому +1

    Thanks a lot , keep rocking sir

  • @kingnicespeed
    @kingnicespeed 7 років тому

    Please help me to explain for compound transmission, to produce 35 r/m at last pulley. From engine axial center to main shaft axial center is 2 meter and main shaft to last pulley axial center is 2.2 meter.
    First Engine RPM = 2200 r/m
    Engine Pulley size = ?
    Second Main shaft pulley Size = ?
    Third pulley size = ?
    Wanted to produce third pulley RPM = 35 r/m

  • @VijayKumar-hl3nq
    @VijayKumar-hl3nq 6 років тому

    This video is to good..
    I like it.

  • @mathzoneinstitute3606
    @mathzoneinstitute3606 6 років тому

    good teaching method

  • @balumohan9280
    @balumohan9280 7 років тому +1

    how to select the belt A,B.C or D which one choose sir

  • @AnkitKumar-oj7ti
    @AnkitKumar-oj7ti 6 років тому +2

    Bhai thoda slowly samjho yar itna jaldi jaldi kuch samjh nahi aaraha or ha hindi me

  • @LoveBirds1
    @LoveBirds1 6 років тому

    Ty sir

  • @arunkiranjwala8960
    @arunkiranjwala8960 4 роки тому

    Does open type and cross type belt drives is applicable to all three cross-sections belts( flat,v,circular)?

  • @SanjayVerma-fu6zw
    @SanjayVerma-fu6zw 7 років тому +1

    Great work

  • @muhammadsyed49
    @muhammadsyed49 6 років тому +1

    Why do you remind me on Indian tech scammers

    • @vvee4725
      @vvee4725 5 років тому

      Why do you remind of 26/11?

  • @Rajukumar-dm4qj
    @Rajukumar-dm4qj 7 років тому +2

    this is very good viodes

  • @sumantsharma7494
    @sumantsharma7494 5 років тому +1

    Tight Ko slaked or slaked Ko tight as per diagram.There is a little bit of mistakes Sir..

  • @yashgandhi876
    @yashgandhi876 6 років тому

    but video is ussefull!!!!!

  • @spoofsaddda8783
    @spoofsaddda8783 6 років тому

    Hii

  • @harikrishna-ry3do
    @harikrishna-ry3do 7 років тому

    nice explanation...

  • @shanmugapriyasubathravenka953
    @shanmugapriyasubathravenka953 3 роки тому +1

    Cross belt drive concept is wrongly explained by you sir

  • @aijazahmed4008
    @aijazahmed4008 6 років тому +1

    aap first pripar wo kar bolo

  • @kunalkunaa7422
    @kunalkunaa7422 5 років тому

    Ager Hindi me Bolte to Kitna aacha HOTA Indian hoke koi faida Nahi hamlog itna pade Likha Nahi he plz hindime bolo sir

  • @ManojKumar-cn8ce
    @ManojKumar-cn8ce 6 років тому +2

    chacha hindi me bol

  • @yashgandhi876
    @yashgandhi876 6 років тому +4

    engineer machanics or machanical**!!!

  • @ManojKumar-cn8ce
    @ManojKumar-cn8ce 6 років тому

    kuch bi nahi samaj

  • @dineshjawale7830
    @dineshjawale7830 4 роки тому

    Bhai tumara train kidr ja raha Hai Kya bas bhag rahey ho video bana Hai toh ache se bana netho mat bana fhate boring video aisa lag raha Hai neend mein utke video bana raha Hai khaki views increase karna Hai karke video bana dho public ko samje ya na samje usse tumein Kya tumein toh Paisa mil raha Hai na video bana Hai toh aisa video banao Taki student's ko samje nhi toh mat banana😡😠

  • @ankitagrawal4754
    @ankitagrawal4754 3 роки тому

    your voice is not clear very bad voice

  • @manavkahlon7669
    @manavkahlon7669 6 років тому

    misguiding useless wrong videos slack side is up and tight is down

    • @sabariraj1801
      @sabariraj1801 6 років тому

      Manav Kahlon
      Dude it depends on the direction of rotation....here in the video as the rotation is in anticlockwise direction the tight side will be on the upper side.🙂

  • @LoveBirds1
    @LoveBirds1 6 років тому

    Ty sir