So freaking stoked our full carbon R1M is finally back together! We also installed a new brembo brake master and reservoir so this beast is ready to be ridden! Get signed up to be entered to win this bike here! www.patreon.com/campisicustoms
Not sure if Dado reads the comments but they make these heat shrink connectors with solder in them. All you do is twist the wires together, slide the tube over them and heat it up. The heat melts the solder and heat shrink and forms a soldered, watertight connection. I’ve stopped using crimp connectors years ago and switched to those, haven’t had one fail me yet. Btw- love this built!!
@@marksmallman4572 that may be the case, I’m only speaking from my experience. I’ve done roughly 20-30 handlebar jobs on Harleys with internal wiring where I used those connectors. Again, never had one fail, and that’s saying something given how much vibration those bikes produce in the handlebars
@@leftymike8730 mark beat me to it. I have them, quality ones and a few have failed under heavy vibration. Back to crimp i went 😁 to each his own i stick to what works for me.
the reason for the two threaded bungs on the swingarm are for using "Superbike" lifter system. It's basically a hook on the swingarm and a bobbin on the stand. pretty much the opposite of the setup you're use to. it's suppose to crash better ib racing use
You should look into the galespeed vre front master cylinder, it’s billet black anodized and absolutely gorgeous and has micro adjustments , also the galespeed rear master looks super clean with a intergraded reservoir tank, I have em on my r6
Campisi customs continues to push the bar higher every time the attention to detail is just immaculate I don’t know how you are going to top this with your next bill some kind away I think you will just don’t know how to keep up the good work great content it’s the little details that makes this thing comes together that most people don’t even think about 👍👍👍😕
Looking good! For the clutch, check out the CRG GP Perch, or for matching looks, there's a Brembo HPK clutch perch. These replace the lever and the assembly it attaches to. Much higher quality, better functionality, and bling 😉
Teflon tape is not needed and a bad idea for staublus and brembo fittings. They are designed and machined to seal without it. Also can contaminate the brake fluid even potentially cause blockage of passages.
Lookin good champs! Cant wait for that triple tree and blue stem nut. You might want to change the grips and the switches for a more dope set up like you did on the monster build. Nonetheless bike looks sick! 🔥
I never win anything. That bike looks incredible and I've been really thinking about an R1...maybe it's worth a few bucks lol. Amazing build team. Ya'll do such good work!
Phenomenal work guys. This bike is beautiful. I'd say this is art and mechanics! 😂 I want to put all the adjectives I know 😂 But yea, this R1M is just a beauty. 🤤🤙
I'm needing a little blue in the center. I'm hoping you get more blue bolts to maybe break up all that black around the engine. I'm talking perfection here. I love this R1
So freaking stoked our full carbon R1M is finally back together! We also installed a new brembo brake master and reservoir so this beast is ready to be ridden! Get signed up to be entered to win this bike here! www.patreon.com/campisicustoms
Highly suggest blue Loctite on the rear Spools. I use the same and they do loosen over time depending on how much you use a rear stand.
Not sure if Dado reads the comments but they make these heat shrink connectors with solder in them. All you do is twist the wires together, slide the tube over them and heat it up. The heat melts the solder and heat shrink and forms a soldered, watertight connection. I’ve stopped using crimp connectors years ago and switched to those, haven’t had one fail me yet. Btw- love this built!!
You might, soldered connections are prone to vibration cracking, more so than crimped connectors.
@@marksmallman4572 that may be the case, I’m only speaking from my experience. I’ve done roughly 20-30 handlebar jobs on Harleys with internal wiring where I used those connectors. Again, never had one fail, and that’s saying something given how much vibration those bikes produce in the handlebars
@@leftymike8730 mark beat me to it. I have them, quality ones and a few have failed under heavy vibration. Back to crimp i went 😁 to each his own i stick to what works for me.
I just love that Brembo brakes set up y’all got going on R1👍, I have the 21 Raven model and it’s a blast,!,,
Crash test goat.. is that you..lol
the reason for the two threaded bungs on the swingarm are for using "Superbike" lifter system. It's basically a hook on the swingarm and a bobbin on the stand. pretty much the opposite of the setup you're use to. it's suppose to crash better ib racing use
Finally back with this series. I've been waiting so badly for this, it felt like forever..
yeah we were in italy and had a lot going on
@@JaretCampisi yeah, I was actually following you on IG and was wondering when you’re coming back home. It’s good to have you back 😁
You should look into the galespeed vre front master cylinder, it’s billet black anodized and absolutely gorgeous and has micro adjustments , also the galespeed rear master looks super clean with a intergraded reservoir tank, I have em on my r6
Campisi customs continues to push the bar higher every time the attention to detail is just immaculate I don’t know how you are going to top this with your next bill some kind away I think you will just don’t know how to keep up the good work great content it’s the little details that makes this thing comes together that most people don’t even think about 👍👍👍😕
I’d like to see you guys do an MV Augusta. I have a Ducati Monster 1200 S but the MV bikes seem to be a higher quality bike.
That's a badass looking R1M and I agree with Dado M should come with a Brembo brake lever.
P.S. We saw Teens alright during the unboxing...
greetings from Portugal/Madeira island, i like your video good ideas the best
Looking good! For the clutch, check out the CRG GP Perch, or for matching looks, there's a Brembo HPK clutch perch. These replace the lever and the assembly it attaches to. Much higher quality, better functionality, and bling 😉
Perfect thank you!
Teflon tape is not needed and a bad idea for staublus and brembo fittings. They are designed and machined to seal without it. Also can contaminate the brake fluid even potentially cause blockage of passages.
Dado is the best mechanic of whole world..go dado its my idol.godbless
The bike is looking gorgeous! Love the carbon & blue!
Yeah I love the carbon and blue look too!
Hello super videos of the R1 M RN65. I got a 2022 myself. What is missing is a 12 volt socket for cell phones or GPS.
greetings from Germany
Great video guys, will help me fit my Brembo brake lever upgrade I have. Bike is so sick 😉😘😍😍🔥🔥🔥🔥🔥🔥🔥🥳
yesss good luck!
Great job, keep up the good work, you and Dado, have a great weekend. Italians rock, I am full blooded, love the Italy videos.
The bike looks absolutely sinister!! Bravo guys! Good show!
Love it, looks sooooo good! Glad you both had a great time in Italy and made it home safely :)
Thank you we had so much fun!
congratulations
Lookin good champs! Cant wait for that triple tree and blue stem nut. You might want to change the grips and the switches for a more dope set up like you did on the monster build. Nonetheless bike looks sick! 🔥
Fireblade SP for the next build series please! 🙏
My birthday is August 3. So this will be an amazing b day gift!
Looks so much better mounted to the right. Good call
You should keep it, showcase it in your home, beautiful piece of art no doubt 👍🏽
Bike looks sick as hell. The carbon covering the frame was worth it too it just flows
Dado the best!!!!!
Awesome video guys as usual.
One quick question- Why don't you guys use dot 5.1 brake oil?
My favorite drinking game is taking a shot every time he says “Dado”.
Update: 2 minutes in im doin okayyyy hiccup bfusysvwjentgkebwbajs bajajaja!
lol
Are you guys also doing matching rizoma reservoir for the rear or upgrading to the the galespeed master cylinder
Dado should get the first ride he is the main man great at his job 👏 👌 👍
Black levers are the move.
I never win anything. That bike looks incredible and I've been really thinking about an R1...maybe it's worth a few bucks lol. Amazing build team. Ya'll do such good work!
haha thanks man and best of luck!
good job Dado 💪
The bike looks awesome only 1 minor thing don’t like the akrapovic exhaust doesn’t fit the style
Welcome home guys 🥃🥃🏴👌
i think winglet would fit nicely in there
WEIGH IT!!
I love blue and white together 🇫🇮😌
Looks great
Bike looks dope!
One question: why don’t you change the handlebar grips to match the bike?
Very cool
That Radio Shack bag in Dado's electrical box brought me back in time
I keep it in there for nostalgic reasons
Oh my god, that bike is sweeeeeeeet
Phenomenal work guys. This bike is beautiful. I'd say this is art and mechanics! 😂 I want to put all the adjectives I know 😂 But yea, this R1M is just a beauty. 🤤🤙
Thank you!
I love it it looks fantastic you boys always do great work!
Thank so much!
I only love christina❤ keep your super bikes
Someone told me she's a porn star, is that right?
My dream bike
That's awesome the bike is looking great 👍 👌
Thank you we love it too!
JARED you should do the same as CHRISTINE change your AUDI R8S for the new one 2023 from the outside the body is the same but the inside WOW
6:33 dude that bike looks insane... Points at the Ducati ☺️
I personally don’t like the blue anodised stuff, but other than that, this thing looks incredible, beautiful bit of kit…
Love dados perverted jokes 🤣 makes me feel right at home
Hi Jaret, could you make any changes to the KTM 1290 superduke R, thank you very much and have a nice evening Ugo
Looks insane! ❤️
Looking awesome guys 🥰 🤙
Beautiful bike. That swingarm stands out a little. Are you planning to powder coat it? It still looks great if not.
Great video....LOVE FROM INDIA!!!!
Wow brembo brakes 😍😍
Sheeeesh!
Love from India bro plz find iguru crazy Indian biker in Ducati show
I met him he was a nice guy!
@@JaretCampisi wow thank u so much make a video plzzz
Beautiful!
Sweet!
I use “Speed bleeders “ on my cars, wouldn’t they work on bikes also ?
Wonder if the factory rear master is 11mm or 13mm 🤔
So beautiful
And absolutely stunning
Thank you its getting there!
Dado: I think the black nut is like 3 times the size…
Jaret: Really?! ……… OMG 😂😂🤣😂
he got me lol
@@JaretCampisi how do I enter to win? Need to upgrade from 09 r1
@@mikeg9552 all the details are here! www.patreon.com/campisicustoms
Awesome bike
I'm needing a little blue in the center. I'm hoping you get more blue bolts to maybe break up all that black around the engine. I'm talking perfection here. I love this R1
I hope you brought him some more Loctite from the trip
lol they had giant tubs of loctite just sitting around the event
Damn so beautiful 😍 bike..
Nice look
I really love your videos I'm from Philippines. Can i have you old brake master cylinder please
เดียวผมจะซื้อรถคันนี้เลยนะ จะเเต่งเหมือนพี่เลยฮ่ะ..😅😎
Get some cool grips to match the colors of the motorcycle.
we've got some ordered!
R1M is still the most handsome bike out there. 🤑🤑🤑🤑🤑
It is a beautiful machine for sure
Get the swingarm painted black
What a beauty he can kom.to holland ❤️❤️❤️❤️❤️
Tightening screws, bolts is a feel and experience thing, if you dont have it get someone else who does.
What serial number is that R1m?
Winglet bro please
3:05
😎
Please put a carbon winglet : )
they are coming next!
Sometime you should do a side project giveaway and do a Honda Grom. Let’s see what kind of madness you can do with that platform.
Honestly that R1 looks almost as incredible as teens
Que carajos entre por la foto de la chica y nunca salió
10 Seconds ago?
You were fast!
Domino grips?
Hope one day there will be a modification on the Kawasaki H2r as well by Jaret Campisi
Why didn’t you guys do Clip ons?
Christina is so beautiful .. and R1 To ..
🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤
Too beautiful to ride? Hell no drive first and look at it in the evening in the bedroom🦁
Why do you get your gfriend to pose for your thumbnails
20:52 Ironic coming from someone who hasn't... and who has perfectly manicured fingernails lmfao.. Probably toenails too... 🤣🤣🤣🤣🤣🤣
After all that work on a beautiful bike and you can't even take out a passenger. What a waste.
Seriuosly I'm not believing what this is really all about.
Do not foreget the winglets at front plz.