I was just about to say that. He should get a resin 3d printer for scale parts and an fdm printer for strong parts. I've printed RC spares in nylon before and they were plenty strong.
@@moimoi2682 True, but I've never broken glass fiber reinforced nylon (reinforced blue trimmer cord). It prints incredibly well at 265⁰C. I see a lot of videos where nylon parts delaminate but that only happens because the printer isn't printing hot enough. I would highly recommend trying it. Try regular round blue cord first then you can try various other reinforced trimmer cords. Reinforced cord will wear out and clog nozzles and destroy drive gears but the end result is amazingly tempature stable and durable.
But you do forget that 3d printing is a 'nested hobby' (separate hobby in a hobby (in a hobby)):P Ex. I've started with FPV drones, then buying a 'decent/cheap' 3d printer to print some parts, ended up with tweaking the printer every now and then and printing stuff i don't need- it can be blurring your focus. I would say: 'Kevin, find someone who loves 3d printing and make him stop printing useless... stuff'' :D
Very creative kev! That blue plug on the revo trans is for the opti-drive system. Opti-drive is just a safety system to keep the trans from being shifted from fwd to rev n visa versa while the truck is moving. That blue plug is the sensor to tell the opti-drive the truck has stopped n will let it shift fwd/rev. I took the opti out of my revo 3.3. The opti is also a failsafe
Pretty sure the cable coming out of the transmission is a lock out for reverse, it wont let you engage reverse unless the transmission has stopped spinning. The steering set up needs to be like a lot of the 1/14th Semi truck's and also like the HPI Wheelie king you just need to mount the servo on the left hand side of the chassis and the short rod that used to steer off the servo needs to be extended back to where ever you mount the servo so the dervo becomes a push pull set up.
Nick you are right, you need to connect it to the optidrive module for it all to work properly (in theory) unless if you want to bang-shift it in reverse...
It's the rpm season the point drive is a different thing and wont let it shift in to reverse if the throttle servo is active I've just replaced my opit drive on revo 3.3
Put a servo horn, the L model upsidedown in a bearing under the front chassis, just before the fan, and a rod under the chassis to the steering servo, and there you are. problem solved.
I was really excited when this build started, it’s actually why I started watching this channel. Why did the build stop here? What happened to this awesome little crawler?
That blue plug is an optical sensor and it plugs into a module called 'Optidrive'. It's connected with your throttle servo and reverse channel also. The Optidrive prevents shifting from a forward gear while moving into reverse (and vice versa) so you don't strip your gears. It's not required for the gear changes to work though.
For the steering kev use a half shaft/ drive shaft similar to the one on that crawler, the u joint would give you some much needed adjustment, then use a bearing and weld/ jb weld that to the underside of the engine’s mounting plate, allowing the drive shaft from the server to be held firmly in one spot
With a 4 stroke, you can easily build a full exhaust system that exits at the rear like a full sized car, keeping the oil mess off the chassis. You can do it with a 2 stroke, but it changes the exhaust tuning, so way easier with a 4 stroke.
Have you ever seen a rc with a real engine probably not but have you seen a real car with a motor like a rc car No but have you seen a real CAR with a real engine YES
Too f*&^ing cool!! I've followed these builds on the other channels you mentioned but love the direction you're going with yours. Having a REAL crawler when you're done - something that's actually capable - is going to be awesome!!
These are the videos that keep me interested! Don’t get me wrong, I do like the bashing videos but this keeps my attention a little better. Great job Kev keep up the good work and pump out some more of these!
Hey Kevin, I have been watching your videos for a long time and I saved up and bought a rustler a long time ago now I have crawlers to bashers and carpet racers you really have inspired me to get into this really awesome hobby!!
OMG!!!! Here it is!!! I haven't even seen the video yet and I'm liking and commenting cuz I know this is gonna be epic. Kev Talbot...KING OF RC...LONG LIVE THE KING! Whuh hoppund...lol...sorry man...no hate...but I love to say that 🤣
try find some rubber washers-spacers to put between the engine and chassis to avoid vibration of the chassis.just like in real cars Kev.
L
Awesome dude, you finally got the four stroke running...
3d printing could help you solve alot of your mounting requirements
I was just about to say that. He should get a resin 3d printer for scale parts and an fdm printer for strong parts. I've printed RC spares in nylon before and they were plenty strong.
@@inoahmann7542 print with pc max polymaker its reallly tuff for parts
@@moimoi2682 True, but I've never broken glass fiber reinforced nylon (reinforced blue trimmer cord). It prints incredibly well at 265⁰C. I see a lot of videos where nylon parts delaminate but that only happens because the printer isn't printing hot enough. I would highly recommend trying it. Try regular round blue cord first then you can try various other reinforced trimmer cords. Reinforced cord will wear out and clog nozzles and destroy drive gears but the end result is amazingly tempature stable and durable.
@@inoahmann7542 can you link here the nylon you have used
But you do forget that 3d printing is a 'nested hobby' (separate hobby in a hobby (in a hobby)):P
Ex. I've started with FPV drones, then buying a 'decent/cheap' 3d printer to print some parts, ended up with tweaking the printer every now and then and printing stuff i don't need- it can be blurring your focus.
I would say: 'Kevin, find someone who loves 3d printing and make him stop printing useless... stuff'' :D
Very creative kev! That blue plug on the revo trans is for the opti-drive system. Opti-drive is just a safety system to keep the trans from being shifted from fwd to rev n visa versa while the truck is moving. That blue plug is the sensor to tell the opti-drive the truck has stopped n will let it shift fwd/rev. I took the opti out of my revo 3.3. The opti is also a failsafe
Awesome work brother! Love it. This is what makes the hobby fun and exciting.
It is good work and I am one of your subscribers
UA-cam all the UA-camrs make UA-camr made a
@@dogboy1610 no
@@dogboy1610 👍🏽
Qqqqqqqqqqq
Pretty sure the cable coming out of the transmission is a lock out for reverse, it wont let you engage reverse unless the transmission has stopped spinning.
The steering set up needs to be like a lot of the 1/14th Semi truck's and also like the HPI Wheelie king you just need to mount the servo on the left hand side of the chassis and the short rod that used to steer off the servo needs to be extended back to where ever you mount the servo so the dervo becomes a push pull set up.
Nick you are right, you need to connect it to the optidrive module for it all to work properly (in theory) unless if you want to bang-shift it in reverse...
It's the rpm season the point drive is a different thing and wont let it shift in to reverse if the throttle servo is active I've just replaced my opit drive on revo 3.3
Like a bell crank system. yep
Put a servo horn, the L model upsidedown in a bearing under the front chassis, just before the fan, and a rod under the chassis to the steering servo, and there you are. problem solved.
I was really excited when this build started, it’s actually why I started watching this channel. Why did the build stop here? What happened to this awesome little crawler?
Haha. It probably stayed built "temporarily".
Hay bud. U need to finish this one.
Yes same
Any update on this vid?
Finish this build !!!!!!!!!🔥🔥🔥🔥🔥 well done
I want to see this 4 stroke build agin I Know it was a year ago
3 years now
Ahhh the good ol' "temporary mounts"
"Nothing is more permanent then a temporary solution that works" 😂
- old Russian proverb
So true
Just so true
why has no company done this before? well make your own and sell them!
RC Crew dont makemover 70$
True im sure he would make a lot of money
RC Crew heay thats a good idea the thing is is the pricetag lol
Can you give me 1 of your RC??PLEASS😊😊cause i cant buy an RC BECAUSE i dont haveoney to buy!!😭
@@rymj-fersonsalhay321 well propally no, get a job and buy one yourself
This is by far my favorite project RC that you’ve worked on. Great job so far!
This thing is what I like. Finding solutions to solve Problems. I hope that you continue this Project. Cheers mate.
That blue plug is an optical sensor and it plugs into a module called 'Optidrive'. It's connected with your throttle servo and reverse channel also. The Optidrive prevents shifting from a forward gear while moving into reverse (and vice versa) so you don't strip your gears. It's not required for the gear changes to work though.
Kev! That is the coolest little vice you’ve got! ❤️ 👨🏼🔧
I’m diggin this build!
She sounds amazing 🤘🏼😎🤘🏼
Damn bro you left us all hanging 😩😩😩
This guys Really sounds like colinfurze
Well yes there both British
He does
No he doesn’t, this guys from around Kent
He can hear you...
Thats like saying Jonathan Ross and Jeremy Clarkson sound the same
Finally no thumbs down!!! Congratulations
And the truck is awesome!
haha theres loads now! lol
@@KevinTalbotTV those basterds!😂
It looks like the engine is actually made for this
I love what you’re doing with this
I love the engine in this setup. Would love to see this in an RTR.
KC RC couldn’t agree more
Living my dream! Your RC workshop is insane, love it. Been watching your videos all day. BIG thumbs up from Canada
Interesting project so far. Have you delved much into 3D printers and designing your own parts? It makes projects like these a lot easier.
Not at all
Great work Brother! love your concept , very adjustable set up, and it will crawl up a wall, Love it!!
For the steering kev use a half shaft/ drive shaft similar to the one on that crawler, the u joint would give you some much needed adjustment, then use a bearing and weld/ jb weld that to the underside of the engine’s mounting plate, allowing the drive shaft from the server to be held firmly in one spot
I think Kevin might be the first guy who created nitro crawler :3 keep it up
Did you ever finish this project?? I'd love to see the finished product.
Very nice, I can see that actually working. Great vid Kev mate 👍👍👍👍👍👍👍👍❤️
I love ur vids and it’s my b day today 23 of January in Astra skiing and playing with udr in the snow amazing
Pro Fortnite genjo happy birthday 🍰
Happy bday buddy 🤟
Traxxas slash 4x4 vxl on the way for me!!! All because of you and your crew. First rc ever and I'm going big...lol...thanks guys
Been watching this build since day one turning out quite nice Kev !!! Lovin it buddy
Thanks for the like kev huge fan here in OHIO USA always watching the crawler 4 stroke was amazing Mach up so much torque insane
So far you're the greatest rc youtuber so far keep it up.
With a 4 stroke, you can easily build a full exhaust system that exits at the rear like a full sized car, keeping the oil mess off the chassis. You can do it with a 2 stroke, but it changes the exhaust tuning, so way easier with a 4 stroke.
thats the plan :)
Im not even into crawling but i love watching your vids on this crazy custom build.
Just to let you know one of your front tyres is on backwards 😁
haha i know, thanks :)
Esto es lo maximo de máximo bros. Felicito al canal y acotar que no entiendo como puede existir gente que ponga dislike, si no les gusta no vean.
2 views but 24 likes 🤦♂️ dont make sense lol....love your video's dude
It only counts if you watch the full video.
I'll be watching for upcoming videos of da beast..🍻😎👍
Slap a big turbo on it and you be running faster than a Honda and run early 9s at the drag strip.
Awesome!! Finally finished
Looking good so far can't wait to see it full out much love an respect from Hamilton Ontario Canada 🇨🇦 ✌ looking forward to seeing your next video
🤛🔨🇨🇦
Al Piner hamilton? i’m from london 😂😂
This is going to be epic! 🇬🇧 engineering at its finest!
what happen with this?? did Kev ever finish this one?
So happy you managed to get the entire thing to actually move! Epic progress and it will be awesome when its done!!! Can't wait!
This Video: *exists*
Me: Aren't motors supposed to be engines for RC cars?
Well yeah but this more realistic :D
Have you ever seen a rc with a real engine probably not but have you seen a real car with a motor like a rc car No but have you seen a real CAR with a real engine YES
Insane building!!! Cant wait to see it in action!
"Its a live!!"
So awesome, just great, I’d like to see that refined and some proper crawling out of it!!!
Great video once again👍
This wire what coming out of transmission is made to shifting gears
Sick this is what the hobby is all about
Look up "rc hydraulic steering test" on You tube could try something like that.
Now this is an awesome build! I can't wait to see where it goes from here.
johnnyq90 has made a custom modded street car with one of those
That guys projects are so cool. Didn’t he try to turbo/super charge one?
@@BusbyBiscuits turbo charged I think
Man this is an exciting build! I'm glad it runs and has all the torque on the planet to gear it up from!!
When demolition derby
Amazing.....
No other words 😄
3:59 he’s bleeding a bit
Too f*&^ing cool!! I've followed these builds on the other channels you mentioned but love the direction you're going with yours. Having a REAL crawler when you're done - something that's actually capable - is going to be awesome!!
Nah go away I'm first god dammit
No one cares that ur first sorry
@RCnIT ! Every sad git is doing it!!!
Almost as pathetic as the people who are like.
"Blah blah blah" "hit the like button if you agree"
🤬🤬🤬🤬🤬🤬
It took me so long to get someone to reply and I finally achieved it!
RCnIT ! But I do agree with you
I've been waiting to see it running. Can't wait to see the next vid
Very cool Kev. Clean it up and fit the body and that thing will be awesome
I’m actually gonna say this is pretty dope
Awesome build! Looking forward to the finished article!
Yes finally you have done it.
way to go kev!!! 😆😆😆
These are the videos that keep me interested! Don’t get me wrong, I do like the bashing videos but this keeps my attention a little better. Great job Kev keep up the good work and pump out some more of these!
Bro your videos of so good and interesting
Coolest video yet. Such a great idea
Don’t worry to much Kev, you will make it work. Don’t let it stress you.
Oh my god I can’t wait till this is done !!!👏👏👏👏👏👏
You are a genius kev! I was blown away the second I saw the vehicle even twitch. Good job and keep up the awesome work!!!!
Yey new vid. The first clip was cool.
I've been waiting for this video
Can't wait to see this finished, I love how cavalier your attitude is to this project lol.
You Make it perfect Kev😊😀
So close! Yours gets big style points... RC Tanks and trucks turned out pretty cool too...
It's absolutely awesome how you run Baja claws on your model and on your land rover!
So amazing this is truly shows how far we have come with technology these days so sweet.
Very excited about this build
Great video, looking forward to the next! Cool idea for sure!
I check your channel everyday awaiting this build lol, that thing is freaking amazing
plz make a long video about this car plz we really want to see this thing work perfectly
OMG that’s so cool not gonna lie.
Thank you for making this video today!
Hey Kevin, I have been watching your videos for a long time and I saved up and bought a rustler a long time ago now I have crawlers to bashers and carpet racers you really have inspired me to get into this really awesome hobby!!
Sweet build Kev
Lol looks like one of your holidays became to many 😂 love your videos
I love this project. Good job Kevin
OMG!!!! Here it is!!! I haven't even seen the video yet and I'm liking and commenting cuz I know this is gonna be epic. Kev Talbot...KING OF RC...LONG LIVE THE KING!
Whuh hoppund...lol...sorry man...no hate...but I love to say that 🤣
That thing has loads of potential Kevin it's a beauty!
I have been waiting for this 😀
This is something I'm highly interested in! I really hope you make some more video content based on this bad boy!!🔥 So awesome. Keep it going!!!!!
I'm glad it works kev.
that is awesome brother u should do more projects like this and the mini monster trucks i love it
Freakin nice job Kevin badasss!!!🤘🤙
Wow, u literally just reached 1mill subs. Well done
I LOVE your vids kev they are the bast
This is so cool I can’t wait to see this done and how it does
That sounds so cool 👍
Please make more videos about this! Amazing!!!
To think Kobe was still alive when this video was made😭💫💔
Good video cant wait you see more progress