I just charged a customer $2500 to paint and install to a brand new Shaker and it is foolish to think two sided tape will keep the flares in place. Flares came out of box slightly warped and there's virtually no surface area on the flare for the tape to adhere.
Thanks bro, I am getting some 20x10.5 wheels with some 305 nittos with the widebody kit and I didnt want to have to cut my fenders, but it looks like I have too.
yes sir, it is a must and it has to happen regardless of the kit you buy. people keep telling me I didn't have to, but if you have a non-widebody challenger and you want to lower it and make the wheels flush with the flares. it has to happen. 😎👌
Thanks for the video. I have ordered the same kit for my charger. I'm thinking buying the wheels because of the back spacing. If you put a lower profile tire on your car it probably would not rub
Here’s the link for the spacers www.titanwheelaccessories.com/products/4-dodge-50mm-2-5x4-5-hubcentric-wheel-spacers-charger-challenger-magnum-chrysler-300?variant=21262989957¤cy=USD&gclid=CjwKCAjwtNf6BRAwEiwAkt6UQhP2A_a_5hOkLbI536mRo-eWi3hG12ImlizhvkvFYQPGO4dkxZ-KYBoCUtQQAvD_BwE
I also bought this body kit on Monday but this is video 4 that I see and I don't like how they cut all the fenders, if I had known better, I took it to a body car and it would have been better because it would look like an agency
Looks good bro i thought all challengers and charger 392 up hellcats share the same bumper design (like all challengers/chargers front and rear same design)?
Thanks Man, but nah. They do share the same bumper from the V6 all the way to the SRT/SCATPACK. after 2019 that's when the hellcat bumper was introduced to the scat pack widebody option.
Hey what’s up Tony I put this kit on my 2017challenger, what you need to do is to overlap the double-sided tape and add some adhesive application, it look like alcohol wipes. It will help the double-sided tape stay on your car I did it two months ago but I did not use the adhesive and and they started to come looseup once you wash your car in the car wash the water and the dryer is going to make your fender flares come off. Check out my video but I do have my car in the shop to have my fender flares installed once again i’ll let you know how things go
thx bro for this up close review. is there any way to secure the fenders without tape? is there any room or spots for riveting into the underside of the body panel? do you have a link to this specific kit you bought?? thank!!
www.vicrez.com/vicrez-demon-wide-body-fender-flares-vz101488-dodge-challenger-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019 Also to answer your questions. You could also use 3m adhesive if you dont want to go with double-sided tape. just look up @tiradoracing he actually made a video using 3m adhesive and the video was very informative. Also there isn't room for rivets for this kit itself.
Tony you should have at least painted your wide body Fender flares & you probably bought the wrong kits if you had to do any cutting the kit is a OE fit no cutting is necessary. . .
I had recently wrapped my flares to match the car. The kit is not meant to be added with the wheels flushed because the brackets and flares are on the way and the wheels will rub. Since I wanted my wheels flushed beacuse it makes no sense to just add the kit and leave it alone cuz it just looks funny. I had to make mods to make it work. Believe me if I didn't have to cut, I wouldn't have.
Sorry for keep saying 2 instead of 2 in wheel spacers.
Nice work! Looks awesome!
Looks great! I did the Vicrez Widebody on my Challenger!
I installed Voxx Hellcat Widebody2 wheels on mine.
What size wheels and do they rub?
Fire
The begging of something good! Keep grinding g
Thanks! 🤙
I just charged a customer $2500 to paint and install to a brand new Shaker and it is foolish to think two sided tape will keep the flares in place. Flares came out of box slightly warped and there's virtually no surface area on the flare for the tape to adhere.
Hey bro are you lowered or stock?
Looks good! Only thing I’ll say, man when you pay that much money for a car, personally I’d take it to a professional shop. But that’s just my $0.02
THIS IS FIRE🔥🔥What exactly did you do to prevent rubbing?
I had to trim the front fenders, all four of the big flares and the brackets to prevent the wheels from rubbing against the kit.
Looks good man where did u find the 2 inch spacers doing a widebody kit to my car as well
Thanks bro, I am getting some 20x10.5 wheels with some 305 nittos with the widebody kit and I didnt want to have to cut my fenders, but it looks like I have too.
yes sir, it is a must and it has to happen regardless of the kit you buy. people keep telling me I didn't have to, but if you have a non-widebody challenger and you want to lower it and make the wheels flush with the flares. it has to happen. 😎👌
The SRT, Scat, T/A all sit lower than the RT and SXT and GT so they need to be cut.
Thanks for the video. I have ordered the same kit for my charger. I'm thinking buying the wheels because of the back spacing. If you put a lower profile tire on your car it probably would not rub
Look good bro I’m having the same issue with the rubbing in the front
Great job! I have 2 questions:
1)Can you please send a link for your wheel spacers?
2) did you cut rear fender or just fender flares?
Thank you
Looks great! Which spacers did you use? Can you please a link for them. I have also 2018 t/a 392 black, wanna do whitebody
Here’s the link for the spacers www.titanwheelaccessories.com/products/4-dodge-50mm-2-5x4-5-hubcentric-wheel-spacers-charger-challenger-magnum-chrysler-300?variant=21262989957¤cy=USD&gclid=CjwKCAjwtNf6BRAwEiwAkt6UQhP2A_a_5hOkLbI536mRo-eWi3hG12ImlizhvkvFYQPGO4dkxZ-KYBoCUtQQAvD_BwE
Looking good bud 👍 is your car sitting on OEM ride hight ?
I also bought this body kit on Monday but this is video 4 that I see and I don't like how they cut all the fenders, if I had known better, I took it to a body car and it would have been better because it would look like an agency
Looks good bro i thought all challengers and charger 392 up hellcats share the same bumper design (like all challengers/chargers front and rear same design)?
Thanks Man, but nah. They do share the same bumper from the V6 all the way to the SRT/SCATPACK. after 2019 that's when the hellcat bumper was introduced to the scat pack widebody option.
@@tarex3923 oh ok i see what you mean
Hey what’s up Tony I put this kit on my 2017challenger, what you need to do is to overlap the double-sided tape and add some adhesive application, it look like alcohol wipes. It will help the double-sided tape stay on your car I did it two months ago but I did not use the adhesive and and they started to come looseup once you wash your car in the car wash the water and the dryer is going to make your fender flares come off. Check out my video but I do have my car in the shop to have my fender flares installed once again i’ll let you know how things go
Do u really need the hellcat bumper i like my fog lights
nice review! Are you going to get new wheels so remove the rear spacers? I have 11" rears with 315 so I shouldn't need spacers but we'll see
Hevi Rotation I have 20x11 with 315s in the rear as well but it all comes down to the off set. So for mine I still needed the spacers
@@tarex3923 I also have this set up its about the off set
thx bro for this up close review. is there any way to secure the fenders without tape? is there any room or spots for riveting into the underside of the body panel? do you have a link to this specific kit you bought?? thank!!
www.vicrez.com/vicrez-demon-wide-body-fender-flares-vz101488-dodge-challenger-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019
Also to answer your questions. You could also use 3m adhesive if you dont want to go with double-sided tape. just look up @tiradoracing he actually made a video using 3m adhesive and the video was very informative. Also there isn't room for rivets for this kit itself.
How much is the car dropped or is it stock height
how is the tape holding up ?
No issues so far
U did an awesome job.where did u get the kits?
What did you use to cut the air dam?
Nice work I really like it
Thank you!
TA Rex 392 ❤️
Tony you should have at least painted your wide body Fender flares & you probably bought the wrong kits if you had to do any cutting the kit is a OE fit no cutting is necessary. . .
I had recently wrapped my flares to match the car. The kit is not meant to be added with the wheels flushed because the brackets and flares are on the way and the wheels will rub. Since I wanted my wheels flushed beacuse it makes no sense to just add the kit and leave it alone cuz it just looks funny. I had to make mods to make it work. Believe me if I didn't have to cut, I wouldn't have.
How much was your car
When I bought it back in 2018 was around 43Gs
Did you only use the tape ???
yes I did.
TA Rex 392 it don’t be moving when driving ?
it won't move as long as you know how to use the tape. I actually used the 3m double-sided tape. not the one that came with the kit.
So If I get 275 allround with spacers will it rub?
if you wheels pass the fenders and you have a low suspension. Yes, they will rub
TA Rex 392 thank you, also whats your front and rear spacer size?
2 inches all around man
TA Rex 392 thank you 🙏 I really appreciate your help real mvp! And your car is badass.
Thank you very much! I'm just here to assist!😎🤙
What tires are you running?
20x9.5 275/40ZR/20 front and 20x11 315/35/20 rear.
🔥🔥🔥