Ford Escape Rusty shock tower Screw and glue no special tools needed
Вставка
- Опубліковано 8 вер 2024
- 1/16 drill bits, Amazon link
amzn.to/3LGl8ZH
Spot weld remover drill bit
amzn.to/46NxGa7
Driver-side, Ford Escape Shock Tower repair kit, Amazon link
amzn.to/3tj0kRD
Alternative driver side, Shock Tower repair kit if the other one is not available  Amazon link
amzn.to/45b6ikP
Loctite promax adhesive like I use in the video Amazon link
amzn.to/3EYmyLG

First off let me apologize for the very long intro and description of the job we’re about to do.
There are three different methods for doing this Rusty shock tower job the first simplest quickest way
Is to buy an aftermarket shock tower and welded in . By cutting out the bad parts
The second way. if you have a good frame rail and the cheapest way of doing the job is to build a new shock tower bracket. And make the wheel tub out of fiberglass. I have video of that up on my UA-cam. That also includes the instructions on how to build the bracket and measurements.
The third way of doing it is the way that I’m going to demonstrate in this video it is called the screw and glue method. Just like all the other procedures removal is pretty much the same with the exception of the welding part. This procedure turned out very solid although was the most expensive of all three procedures to do because it required more materials. It did turn out very well and I’m sure the repair will last a number of years. So hopefully it’s it helps you save a couple dollars and get your Ford Escape Mercury mariner or your Mazda tribute back on the road. If you have a Rusty shock tower job on a 2001 through 2011 Ford escape Mazda tribute or Mercury mariner this is the video for you please consider subscribing and I hope you enjoy the video God bless and have the best of days.
#Fordnarion #ford #fordfamily #fordmuscle #FordPerformance #fordlife #fordlove #TheClayWay #rustyshocktower #rustyford
You should watch the whole video .(sometimes I’m fun) So you can inform yourself with all the great information that I put in my videos and God bless. I hope the videos helpful for you!
And Thank you for viewing!
Have a great day
“You can’t really break it if it’s already broken!”
Please subscribe!!!
if you want to reach out to me and get a message to me hit me up on clays ac and auto repair on the facebook And if you have any questions it’s easier to message me straight through Facebook
Why should you Subscribe to my channel ? I constantly make these videos that show you how to use your tools and show the techniques that we use in our auto repair shop every day. And all it does is help me send you stuff . I do not sell your information I do not solicit you. all it does is add a couple 100 thousands of a cent to me . And it cost you Nothing ! you would only be helping me . And hopefully i was able to help you !! So please be kind and enjoy!!
I am not responsible for any damage that happens to your car or if I am incorrect about any of my information contained in my videos or any accidents that happen while you’re performing the procedures that I explain , I will not be liable.
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products