Mr. Bj Installed my music in a cutlass 15 years ago and everything still works and he’s the best thing since sliced bread awesome installer and great personality your the MAN 🙏✅👌👍🏿
@@bj_from_the478what battery would you recommend for a deafbonce atom 7.5k I have 300 amp alternator 2 runs power 2 runs ground plan on adding more grounds as well
@@bj_from_the478 thanks for all your help ur and ur work to detail on everyone's build is always a work of art that can be showed off because it's perfection at its best
It’s harder fixing bad work than starting from scratch I don’t think people understand that at all… Awesome job cleaning everything up and making it better…
I want to see a video of the work you are doing on the roadmaster in the background!! You can make just about anything sound good in them cars I know from experience from my first 1. Plan on doing something with the 1 I have now.
Man like the way you go into details of what you done to build and it’s super clean. I have a question can bad grounds or wrong size fuse for amps or even both cause the car to have like a weird stutter effect while driving and the bass hit. It happens to me only on some hard hitting bass. I have d5100 in front, 300 amp high output alternator, big 3, battery in the back, and all ofc wiring. My main wire running to the back battery is zero gauge then the amps are 4 gauge. Thanks for your time and entertaining videos.
Amazing work. I wish I was close. Hard to find people that care this much. Can you share what grommets you use to go through the body to the frame with the grounds ?
Hey BJ I spoke with you the other day, from Valdosta ga... I know you are busy with relocating and won't be available til next month as you stated... I spoke with you about getting some door panels done in my 01 Tahoe but also wanted to see about getting a custom center console made that goes all the way to my back seat that holds amps and my 90ah xs power battery. Also the back dash board is cracked a bit so I would like to redone with (2) 6.5/speaker grilles. If you could give me a close estimate so I know what to put aside for you when I bring it to you I would greatly appreciate it bro
Had some speakers put in a regular car He doesn’t put in all the screws and clips back in your car doors. Have your stuff rattling like a some groceries.
@landonjackson4565 😆 🤣 so I will guess that you just started following BJ , If you are really tuned in, you would know BJ was doing a giveaway once he hit 10k subscribers 😉. It's not that serious ,
![75 Caprice Classic | Audio Finally Complete ] Sound ✅ \ TOO LOUD 💯](http://i.ytimg.com/vi/P-Z44QjQB00/mqdefault.jpg)
![75 Caprice Classic | Audio Finally Complete ] Sound ✅ \ TOO LOUD 💯](/img/tr.png)
Mr. Bj Installed my music in a cutlass 15 years ago and everything still works and he’s the best thing since sliced bread awesome installer and great personality your the MAN 🙏✅👌👍🏿
Super clean build as always!!
Greatly appreciated the support stay tuned got some more that almost completed
@@bj_from_the478what battery would you recommend for a deafbonce atom 7.5k I have 300 amp alternator 2 runs power 2 runs ground plan on adding more grounds as well
I love the detail and explanation you do. I'm ready to win the install so you can go crazy on my 74 convertible caprice.
Thanks for your support send me some pictures of your whip 478-262-9307 🙏
@@bj_from_the478 definitely will when it gets back from the motor swap.
Here’s a guy that knows his stuff
Thanks I try 🙏👍🏿
Perfection in its finest can't wait see what u have plan for me I gladly appreciate u too keep the content coming
Well glad you asked I’m about too line-X your box and do the amp racks I ll give you heads up when I’m about too release the video thanks
@@bj_from_the478 thanks for all your help ur and ur work to detail on everyone's build is always a work of art that can be showed off because it's perfection at its best
Daaammnnn nice nice professional work my bro
Yes sir thanks for tuning in ✅🙏
LOOKS GOOD BROTHER NICE CLEAN WORK 💯💯💪💪💪💪
You know how we get down sir 🙏👍🏿😁
@@bj_from_the478 💯💯💯💪💪💪
You Did A Great Job On My Cousin Car💪💯
I greatly appreciate that 🙏
Who painted your cousin's car bro?
A+ Very nice paint job, love it!.... its the little details. #underneath rear quarter where the ground wires are.
🙏👍🏿
AWESOME CAR
It’s always better in person 🙏
Nice Job !!!
Thank
It’s harder fixing bad work than starting from scratch I don’t think people understand that at all… Awesome job cleaning everything up and making it better…
Always enjoy seeing you work so fresh n clean u already knw salute frm 🇨🇦🫡
Sir how have you been hope that everything is going good your way 🙏
@@bj_from_the478 thanks for ask just waiting for the car to come out in May
Love that you love your finished product. Clean as a whistle.
Beautiful work
🔑🏆
Fire work as aways
Thanks 🙏 sir
I want to see a video of the work you are doing on the roadmaster in the background!! You can make just about anything sound good in them cars I know from experience from my first 1. Plan on doing something with the 1 I have now.
I doing the video for the build next week I’ll keep you updated 4 12” four amps and a ton of mid 😁🙏
Looking forward to seeing the video. I ran 6 12’s in the first 1 i had then took it out and ran 2 ported
Still no video of the Buick Roadmaster
Idk which build I like better this 1 or the 1 for Pin100 with the 4th order...PERFECTION
Pin 100s built was a horse of a different color 😁
@@bj_from_the478 his build motives me with the fiberglass bottom 4th order...
Nevermind I'll just contact you on something like this later for my 76 2dr impala hard top 😊
Cool if you need me too make one of those pieces I have the panels premade
Awesome work as always B.J.
💪💪💪💪💪💪💪
🙏🙏🙏🙏🙏🙏🙏🙏🙏
As always, dope work ,
Thanks 🙏
Very nice install, how many amps is the alternator
It’s a Mechman 370amp alternator
BJ, I have a 70 impala, and I located in GA. My car need some love and upgrade.
Okay sounds good I’m in Warner Robins ga and whenever your ready just reach out 👍🏿👌
Nice super clean..
Greatly appreciate that sir
OMG, that is freaking SICK AS F--k!!!
🙏👍🏿
Where you located I need my 1966 wired up
Centerville Ga My shop is OCD Audio LLC just Google my business and everything thing is on my page 🙏
💯🏆🏅💰💰💵
Thanks 🙏
Nice 👍🏾
Man like the way you go into details of what you done to build and it’s super clean. I have a question can bad grounds or wrong size fuse for amps or even both cause the car to have like a weird stutter effect while driving and the bass hit. It happens to me only on some hard hitting bass. I have d5100 in front, 300 amp high output alternator, big 3, battery in the back, and all ofc wiring. My main wire running to the back battery is zero gauge then the amps are 4 gauge. Thanks for your time and entertaining videos.
Okay do you have the rca on the same side as the hot wire 🤔
Do you sell just that piece by the steering wheel for the radio like that, the one with the efi display on it 🤔
Bj what state is your shop located in?
Georgia
How did you mount the 6x9’s in the rear? I know it’s tight back there, did you have to use a plasma cutter to do some cutting?
Not at all it’s some minor cutting involved but nothing major a good pair of metal cutters and your 👍🏿
@@bj_from_the478 Thanks BJ!
Amazing work. I wish I was close. Hard to find people that care this much. Can you share what grommets you use to go through the body to the frame with the grounds ?
What voltage meter did you use?, it looks dope. And i really enjoy ur videos sir💯🔥💪🏿
🔥🔥🔊🔊
Hey BJ I spoke with you the other day, from Valdosta ga... I know you are busy with relocating and won't be available til next month as you stated... I spoke with you about getting some door panels done in my 01 Tahoe but also wanted to see about getting a custom center console made that goes all the way to my back seat that holds amps and my 90ah xs power battery. Also the back dash board is cracked a bit so I would like to redone with (2) 6.5/speaker grilles. If you could give me a close estimate so I know what to put aside for you when I bring it to you I would greatly appreciate it bro
Cool give me a call tomorrow I got you
@bj_from_the478 💯 Will do
Wow,it's so cool!Do you have a need to test automotive electronics? I think this is also suitable.
My husband has a 1971 Delta 88, I want to get this done for him for Christmas. How can I get in touch with you?
Sure you can reach me at 478-262-9307 Monday-Friday 10am-6pm eastern standard time 🙏
Машина сплошной оргазм я прям кайфанул мечта )
🤣🤣👍🏿
i just bought a 73 vert im from Houston.. can i order the panels from you?
Need a consule built for 72 chevy impala how do I get in contact with you to start the process? Thanks
What speaker are you running 🏃
Sorry are you talking about mids or bass
@@bj_from_the478 yes mid and high
@@bj_from_the478yes mids and highs
How do I contact you for a full system install on a 72 Oldsmobile?
Had some speakers put in a regular car
He doesn’t put in all the screws and clips back in your car doors.
Have your stuff rattling like a some groceries.
🍇💪🏼💜
Nasty
Thanks 🙏
Where you located at
Warner Robins Ga Google OCD Audio LLC
I see you have over 10k subs , did you do the giveaway ? How to go about getting estimates?
A giveaway? Maybe he can give you a application so you can get a job instead of begging on here!
@landonjackson4565 😆 🤣 so I will guess that you just started following BJ , If you are really tuned in, you would know BJ was doing a giveaway once he hit 10k subscribers 😉. It's not that serious ,
@@jermainekennedy4415 ok than wait for him to bring it up instead begging for freebies
I need to get a center dash speaker pod from asap. What’s your contact information sir
BJ where is your shop located and what is your phone number?
Warner Robins Ga and you can google my business OCD Audio LLC 🙏👍🏿 I appreciate you tuning in
How do we contact you? I’ve tried IG and the number provided on your page but nothing
478-262-9307 Monday-sat 10-6 👍🏿
What's a phone number to contact you?
Where are you located