How to LIVESTREAM VIDEO from a DRONE to ATAK UAS Plugin Tool
Вставка
- Опубліковано 27 сер 2024
- How to livestream video from a drone to the ATAK UAS Plugin Tool
LINK TO PART 1:
How To INSTALL ATAK and the UAS PLUGIN in the DJI Mavic 3T
• How to INSTALL ATAK an...
How to live stream video from a drone, UAV, UAS into ATAK UAS plugin tool. Drone live streaming video,
UAV live streaming video platforms,
Drone live streaming video software, ATAK, CIVTAK, WINTAK, ATAK Go
ATAK GoV5, ATAK UAS tool live-streaming video tutorial
How to livestream video with wowza
Wowza video livestreaming
Wowza video livestream
Hope this tutorial is helpful! Let us know in the comment section below how the livestreaming goes and what aircraft you’re using! Here is the link to PART 1:
How to INSTALL ATAK and the UAS PLUGIN in the DJI Mavic 3T
ua-cam.com/video/60mbK6ejAmM/v-deo.html
Thank you so much for putting this tutorial together! Works perfectly!!!
Glad it helped! 🔺
You the man! Worked first try! Great tutorial
Thank you and great job getting it up and running! 🔺
keep crushing it guys! I would recommend a couple changes on how you are doing the stream sharing. You are making it way harder than this needs to be.
Roger that! We’re always looking for an easier way to do things. What changes would you recommend making to the stream sharing?
AJ, what would you recommend? It did seem a bit clunky but how could we make it easier? That is not take anything away from what Seth is doing with TAK and the UAS Tool. So kudos to you Seth. Thanks!
No worries! My priority was to get people up and running successfully so they could use the software. I’m sure there’s a lot of things that could be streamlined in the process! 🔺
All good. Let me get something written up for this to help.
Great tutorial!!
Thank you! 🔺
I want to know how to connect ATAK to my AUTEL drone
You should be able to follow the steps in the video tutorial here:
ua-cam.com/video/60mbK6ejAmM/v-deo.htmlsi=EkVd6kU4BgRIypUc
Just select AUTEL from the “settings”, “default platform monitoring” menu instead of DJI Go or DJI GoV5
What if i dont have a dji. I have a custom drone that runs on PX4?
Here’s a link on how to install ATAK and the UAS plugin tool. ua-cam.com/video/60mbK6ejAmM/v-deo.htmlsi=EkVd6kU4BgRIypUc
I didn’t see PX4 as a selectable platform in “Settings”, “Default Platform Monitoring”. But you might be able to run it directly by selecting none then trying to launch your flight software after ATAK and the UAS tool is running. If not, you can pull the stream directly from the aircraft into ATAK by following the steps in the tutorial at the 6:02 mark.
Hello
Thank you for the video
I have an issue because there is no IP address after the primary server how can I deal with this please? Thank you for your help
Make sure to launch the stream. Then it will display the IP address after the primary server. 🔺
@@Skynetdronesystems Hello and thank you very much for your answer,
but even when the stream is live i don't have any IP address appearing
Hmmmm what are you using for a codec? RTSP, RTMP, SRT?
do you guys have a method of streaming for a DIY drone possibly but routing the video recive to the pc some how ?
Go to 6:02 of the tutorial. You can pull the stream from any drone that has a place to enter an RTMP, RTSP, SRT encoder link. See if that helps, if not let me know and we’ll figure out a work around.
@@Skynetdronesystems i'm not saying i know a lot about drones but i mean for none digital drones like dji like analog video witch i'm more wondering if there is a hardware way to connect the receiver to a android or PC to live stream it
its hard to explain but most of the time diy drones aren't sending the video to a computer so you cant use software they have separate parts that don't export video outside of HDMI cables ( FPV camera--> VTX----> (VRX)/----> screen or goggles )
I see what you’re saying. There is a PDF I found that completely explains how to incorporate DIY FPV drones into ATAK recently. It’s titled “UAS FPV GUIDE” if you locate that pdf file inside the ATAK site TAK.gov or ATAK application and download it. It has step by step instructions regarding analog etc.
@@Skynetdronesystems i searched the website and i know how its sounds that im asking for a walk thru but i could not locate any pdfs with the link provided
I found it for you. Hopefully this helps.
To download the PDF:
-Open the ATAK application. -Then launch the UAS plugin.
-Click return to UAS tool.
-Open Settings
-Scroll down to the bottom until you see “Show FPV guide”
-Click on the 3 vertical dots in the top right inside the PDF. Then click download
The FPV guide is something I’ve been excited to dig into but haven’t had the time to yet. Let us know if it works for you and anything interesting you find inside the PDF!
🔺