Thanks m8. I might not know Korean, but I understand the steps well enough to change out some old parts now. Figured it would be more complicated, because HK
Holding the firing pin and firing pin block in place while putting the roll pin back in is indeed tricky. Your method of holding the firing pin in place with your finger is cool, but it doesn't work for my larger fingers. For others who may have the same issue, I found the best way is to start the roll pin into the top of the slide with your plastic mallet/hammer (making sure it doesn't go in too deep, maybe 1.5mm) then insert the block spring, block and firing pin into their places in the slide and hold the firing pin in as best you can with your fingertip, then put your punch into the roll pin hole from the bottom, which will properly orient the firing pin to hold the blocker in place, flip the slide over, and tap the pin the rest of the way in from the top, while holding the punch lightly in place. As the pin is driven in from the top, it will push the punch out of the hole.
Very helpful, took many views before I realized you were saying to hold the firing pin in.
Thank you!
thank you so much. I am glad you understood HK language!
Thanks m8. I might not know Korean, but I understand the steps well enough to change out some old parts now.
Figured it would be more complicated, because HK
I am glad you understood the language of HK. Yes. It is slightly more trickier than most of the striker pistols.
Holding the firing pin and firing pin block in place while putting the roll pin back in is indeed tricky. Your method of holding the firing pin in place with your finger is cool, but it doesn't work for my larger fingers. For others who may have the same issue, I found the best way is to start the roll pin into the top of the slide with your plastic mallet/hammer (making sure it doesn't go in too deep, maybe 1.5mm) then insert the block spring, block and firing pin into their places in the slide and hold the firing pin in as best you can with your fingertip, then put your punch into the roll pin hole from the bottom, which will properly orient the firing pin to hold the blocker in place, flip the slide over, and tap the pin the rest of the way in from the top, while holding the punch lightly in place. As the pin is driven in from the top, it will push the punch out of the hole.
Thank u verry usefull video
Greetings from the Netherlands
Hey Thank you for watching. Even if you didnt understand Korean, I am sure you understood Hk language.
Cool vid thanks for sharing!
thanks for stopping by.
이거 덕분에 몇년 묵은 때 벗겨냈습니다!! 감사합니다!!
안녕하세요? 감사합니다. USP가 있으신모양이네요. 건강하시고 주위에 널리 알려주시기 부탁드립니다. ㅎㅎ
크~ 감동입니다.... 자세한 설명 감사합니다..유튜브에 나온 동영상중 가장 자세하고 이해가 쉽게 설명 해주셨네요...역쉬 짱이십니다~~
별말씀을요. 봐주셔서 감사할뿐입니다. 한 500발-1천발정도됐을때 한번 닦아주시면 될듯합니다.
Thanks. Helpful even if I don't understand Korean.
LOL I am grad I could be a help. USP is one of my all time favorites. I assume you have an USP too!
HK USP9 Full size in stainless steel. Adding LEM, match weight, jet funnel, soon.Very Lara Croft.
Sweet~~ Where did you get the match weight from? I might make Tomb Raider Experts if the price of the weight is right.
자세한 설명 감사합니다, 나중에 한번 해봐야겠슴다.
Jin 110474 사실 한두번햐보면 감은 옵니다. 가끔 스프링이튀어서그렇죠. ㅎㅎ
ㅇㅇ 이번 편은 자바바님 스페셜이로군요. ㅎㅎ^^
그나저나 HK USP 계열은 파이어링 핀 닦을 대마다 롤 핀을 다 빼야하니 정비가 쉽지 않겠네요.
+날개달자 분해로따지자면 usp계열이 좋지않은듯합니다. 어차피 많이뜯는건아니니 그나마 다행이지요.
펀치가 몇mm인가요?
흠... 죄송합니다. 저영상찍은지가 좀되서 펀치싸이즈가 생각이 안나는군요. 아마도 펀치가 핀보다 살짝 작은싸이즈면 되지 않을까 생각됩니다.
Wtf