Would you recommend AEG over Bosch? I had considered their Bosch Series 6 9KG washer and matching dryer, not been sure about AEG after last bad experience a few years back.
the 7000 washer dryer has the new leak detection hose with a huge block where it goes on the water tap. Because of that I had to make a new hole in front of the sink unit back support. You're meant to pour 2 litres of water in most models prior to starting up to clear any debris in the system so please read instructions folks.
I found very difficult to undo the upper transit bolt & it was stuck in after the bolt was removed. Took me ages to prize the rubber out. Yours was a bit of tugging but mine was well and truly stuck and came out in pieces which did fix back together. Nevertheless it was a half hour job and hurt my fingers.
Thanks Mike :). It’s a good flexible machine - plenty more videos to come :). It’s a weird hybrid between PEX and rubber - but it’s a really thin bore, which makes for a quieter but slower fill.
Hello! In the user manual it tells that you should wait at least six hours after you have laid it down to turn it on. There was a reason which I can’t recall right now! Could you include it as a note in the video? Excellent video ❤
Lovely machine, how would compare it with similar priced machines also I notice you have a Miele undercounter dridge or freezer. I was thinking of getting the same, would you recommend them.
Hi, thanks for your comment :). It’s a good all rounder machine and I wouldn’t hesitate in recommending one. The Miele fridge is ok, but I would personally just get the Liebherr one as it’s cheaper and offers electronic control rather than manual. We have a Liebherr undercounter freezer as Miele don’t do frost free and that’s good. I would much prefer a standard upright fridge/freezer though, I don’t like having to bend down to look in the fridge.
Nice machine, I dont think I've ever unboxed a machine that's arrived with a spanner for its own transit bolts other than the Miele. Sorry I also never replied to your whatsapp!
Thanks! They’re not bad for what they are. The LG came with a spanner too! It’s a nice touch, when I installed the original Siemens I had to go to Wickes mid install to get a spanner kit as all my tools were back at the garage 😂
Great machine and worth every cent! It can wash our daily load of laundry in just one hour and it always came out perfectly clean
i prefer this to the Siemens, best of luck with both😊
Thank you! I like them equally, though I would prefer it if AEG did a 1600 in more than 8kg in the new range here 😊
@@TheWashHouse i love it mostly because of Nidec😅
I like in the UK and I ahev the 7000 series UniversalDose 1600 10kg
@@JaiJai-vb5vy yes but they don’t do 1600 in the ones with the jet over 8kg unfortunately which is a shame
@@TheWashHouse Oh in other country's they do have 9kg 1600 with jet!
Beautiful! I really need to see your collection ! X
Thanks Gary! Hopefully when it’s all organised and curated nicely it’ll be ready for visits :) x
@@TheWashHouse Ohh lovely will have to sort something 🤣
Ooo i didnt see that coming, looking foward for the videos😍
What can I say, I’m a man full of surprises 😂
Fantastic looking machine. Hopefully it’ll heat well!
It heats very precisely - I was pleasantly surprised 😊
Omg😍, can't wait to see more video's of it, hopefully? :)
Plenty of videos of this and the Siemens to come 😊
Would you recommend AEG over Bosch? I had considered their Bosch Series 6 9KG washer and matching dryer, not been sure about AEG after last bad experience a few years back.
the 7000 washer dryer has the new leak detection hose with a huge block where it goes on the water tap. Because of that I had to make a new hole in front of the sink unit back support. You're meant to pour 2 litres of water in most models prior to starting up to clear any debris in the system so please read instructions folks.
Great machine❤
It really is!
I found very difficult to undo the upper transit bolt & it was stuck in after the bolt was removed. Took me ages to prize the rubber out. Yours was a bit of tugging but mine was well and truly stuck and came out in pieces which did fix back together. Nevertheless it was a half hour job and hurt my fingers.
Amazing washer you are an amazing UA-camr
Thank you 😊
Fabulous, look forward to seeing the programmes - PS I see more companies are using those PEX cpld fill pipes?
Thanks Mike :). It’s a good flexible machine - plenty more videos to come :). It’s a weird hybrid between PEX and rubber - but it’s a really thin bore, which makes for a quieter but slower fill.
Wonderful
Thanks :)
Hello! In the user manual it tells that you should wait at least six hours after you have laid it down to turn it on. There was a reason which I can’t recall right now! Could you include it as a note in the video?
Excellent video ❤
Thanks for your comment. That advice is only for heat pump dryers with the refrigerant - that wouldn’t apply to washing machines :)
@@TheWashHouse awesome! I have the washing/dryer combo and this explains why I should wait 6h to start the machine. Of course I let it 10h to relax 😎
@@mitriada that would make sense :). How do you like the heat pump washer dryer?
@@TheWashHouse they delivered it to me, but it was scratched. I’m waiting for the new device next week. Let’s see :)
@@mitriada I wish you the best of luck! Let me know how it goes :)
Lovely machine, how would compare it with similar priced machines also I notice you have a Miele undercounter dridge or freezer. I was thinking of getting the same, would you recommend them.
Hi, thanks for your comment :). It’s a good all rounder machine and I wouldn’t hesitate in recommending one. The Miele fridge is ok, but I would personally just get the Liebherr one as it’s cheaper and offers electronic control rather than manual. We have a Liebherr undercounter freezer as Miele don’t do frost free and that’s good. I would much prefer a standard upright fridge/freezer though, I don’t like having to bend down to look in the fridge.
would you record an overview of the shows in the app? please 🥺
Nice machine, I dont think I've ever unboxed a machine that's arrived with a spanner for its own transit bolts other than the Miele. Sorry I also never replied to your whatsapp!
Thanks! They’re not bad for what they are. The LG came with a spanner too! It’s a nice touch, when I installed the original Siemens I had to go to Wickes mid install to get a spanner kit as all my tools were back at the garage 😂
LG give spanners as standard with all of their machines.
I had a Bosch with a spanner when fuzzy logic first came out.
@@blakaeg I wonder if Samsung do too? the other South Korean company
Bellissima
Is it better than bosch-siemens?
this or siemens 700iq?
Where is this washer made …I’am due for a new washer.
HA Here interesting sticker says Krakow pl but is not there
Beutifual washer
Thank you :)
Where is new video AEG cycle?
Patience is a virtue 😊
PLZ DO SPIN CYCLE NEW AEG
Where ist the Siemens
Read the description 😊