Man that hatch looks so good. Just finished my 500hp d16z6 turbo build civic coupe. Still wish I could find a hatch but they are so rare. Love your videos, keep them coming!!
Dang 500hp, no playin around there! Have fun with it but be careful too man! Yes, kinda hard to find a decent example of these cars. Mine was pretty garbage from the get go to be fair and still is but I’m working on it ha
Closed cell foam would be better, lighter and more insulating for your battery in the box. You can check around people who ship a lot, they may have some laying around. If not it’s dirt cheap to buy. I hadn’t checked out the channel in a while. The EG looks good!!
Thank you very much! Yeah for real, been on jackstands far too long. Next weeks episode is perfect for you then. it’s all sound clips of the HKS and the car is moving the whole episode! haha! thanks!
I had to replace one of these seals on my freshly built turbo ep3, was a pain getting the pulley off but shes all good now. Not sure why mine failed though. Great build bro, love it.
Ah yes, the pesky seal. Maybe yours wasn’t sitting quite right. Strange that a new seal would leak. But who knows, I can imagine it! Sounds like a cool car you’ve got! Thanks for hangin out
I did learn when I used the solid hasport mounts if they’re over torqued (I impacted mine on) it vibrated more than it needed too, I believe it’s only around 40 ish foot pounds, it’s been a while but I know there’s a torque spec to reduce SOME chatter
That’s really interesting Donald, thanks a lot for that info! I impacted mine on too so maybe it’ll reduce some if I chill out on that. Dang man, you had the solid mounts. Woooo that must’ve rattled your teeth out! These are the U70a mounts and they’re pretty intense. Thanks again though dude!
Oh dude I’ve been sweating my ass off down here in FL while doing all these latest videos. Started wearing my swimsuit lol. I’m glad to hear you’re getting going on your own project! Have fun with it and thank you
Good video dude, I just started following your channel and Instagram as well, love your energy and love for your car. Keeping going dude. Hope to see more track videos from you.
Hey thanks a lot! Sure appreciate you hangin out and your positivity as well. Track day is coming! Looking forward to getting out there. I’ll be sure to film how it goes for better or worse hah
This one is from good ‘ol Harbor Frieght. If you really want a super torquey impact I’d check out the Milwaukee like the other comment here or the Craftsman
On the timing.. I have so many questions regarding setting up timing 🙄. Like what if I swap a head, what do I do if the head doesn't have markings or words on the cam gear, does the block need to be set a certain way, what about the dizzy, etc.. gonna learn one way or another though 😂; at least glad I understand that I'm going to be working with an interference engine so I can try to manually crank it before breaking anything with the starter 😂
Kudos brotha! First starts are always a moment of intense 2nd guesses. Did I tighten this? Did I check that? So glad that she turned over and played nice....somewhat lol. I hope this is the beginning of many years of you enjoying your hard work and perseverance.
I’m not sure of the brand off the top of my head, sorry. I believe I bought it off amazon a year ago or so. Check there, should have a good amount of choices. That or Pegasus Auto Racing Supplies. They have cool stuff
Hey! My girlfriend and I really want to get this new shirt you released on your store. I searched through the store and it only comes in T-shirts. Are you able to provide a tank top option for us? Let me know if you can help, thank you!
Hey man, the tank tops are up on the site if you still want to pick a couple up for you and your girlfriend. Thanks for your support dude! I know you’ve been around for a long time on the UA-camz
Interesting, your d16a has that weird emissions piece @.59 seconds. The Y8 has that part too, I forgot what it was, but the damn part broke on Civic beater, not sure what it doesn't but it ran fine without it lol.
Good eye and actually I moved that entire water pipe and thermostat housing over from my Y8 previous, so it lives on through the d16a. Again, great eye you’ve got. I think it can be plugged with the proper size bolt and just delete that thing. I just have yet to look for that proper size bolt. From what I understand that piece aids in warming up the engine to the temp it wants to be at for normal operation
Hey man I just seapwd a d16a into my y7 car what harness and ECU did u use and how did u get it to run I had issues getting spark due to the crank sensor
D16a non vtec you should be able to just swap over the long block. If I am in that spot I would use all the same everything around the longblock, literally just switch out the longblock. reuse everything wlse
Man that hatch looks so good. Just finished my 500hp d16z6 turbo build civic coupe. Still wish I could find a hatch but they are so rare. Love your videos, keep them coming!!
Dang 500hp, no playin around there! Have fun with it but be careful too man! Yes, kinda hard to find a decent example of these cars. Mine was pretty garbage from the get go to be fair and still is but I’m working on it ha
Can’t wait for a track day, want to see it race!!!
Well I’m happy to hear that David, thanks man! I’m looking forward to bringing that content soon enough!
Thats how we learn. Every mechanic started somewhere. Trial and error. Cool vid.
Thanks for that encouragement and I agree. We learn as we go. Thanks, hope you stick around!
I have an HKS hi power on my Fit, best sounding exhaust I've ever had. EG looks beautiful man, I'm jealous! Enjoy it!
Oh nice dude! I love the look of the HKS on the Fit. Good for you!
Your EG is beautiful. So clean and well set up!
Hey thanks a lot! Big interior upgrade coming soon in the videos
Rob's got the track itch! Lookin boss man. She is gonna be a world of difference on the track.
You know it Nick! Looking forward to carvin up some pavement
Closed cell foam would be better, lighter and more insulating for your battery in the box. You can check around people who ship a lot, they may have some laying around. If not it’s dirt cheap to buy.
I hadn’t checked out the channel in a while. The EG looks good!!
Interesting, thanks for the advice!
Good job man. Love the HKS exhaust and I’m ready to see this car move! 👍🏼
Thank you very much! Yeah for real, been on jackstands far too long. Next weeks episode is perfect for you then. it’s all sound clips of the HKS and the car is moving the whole episode! haha! thanks!
I had to replace one of these seals on my freshly built turbo ep3, was a pain getting the pulley off but shes all good now. Not sure why mine failed though. Great build bro, love it.
Ah yes, the pesky seal. Maybe yours wasn’t sitting quite right. Strange that a new seal would leak. But who knows, I can imagine it! Sounds like a cool car you’ve got! Thanks for hangin out
Them harbor freight tools come in handy!✌🏾nice build
Always lol
Soo proud of you guys, man that d16 sounds healthy!!
Thank you Arthell! Yeah, it sounds good man, hopefully it is haha
Great video good stuff! And yes I'm still following you....
Haha still here!
I just got a 98 ek coupe. Can’t wait to start modding it
Duuu it!
Regarding the oil seal, lesson learned for the next time.
Yeppers
Yeaaaaaaahhhhhhh!!!!!!! Sounds nice and reliable and starts up so easy! Great iob on the swap! Can't wait to see her back on track!
Yesss looking forward to the track day
What a clean hatch.
I did learn when I used the solid hasport mounts if they’re over torqued (I impacted mine on) it vibrated more than it needed too, I believe it’s only around 40 ish foot pounds, it’s been a while but I know there’s a torque spec to reduce SOME chatter
That’s really interesting Donald, thanks a lot for that info! I impacted mine on too so maybe it’ll reduce some if I chill out on that. Dang man, you had the solid mounts. Woooo that must’ve rattled your teeth out! These are the U70a mounts and they’re pretty intense. Thanks again though dude!
Nice you did it man props on Sri king single cam
Haha thanks Curtis!
Congrats on the start up bud! Can’t wait to start wrenching on my EJ1 now that it’s cooling down here in VA #SingleJingleGang
Oh dude I’ve been sweating my ass off down here in FL while doing all these latest videos. Started wearing my swimsuit lol. I’m glad to hear you’re getting going on your own project! Have fun with it and thank you
Good video dude, I just started following your channel and Instagram as well, love your energy and love for your car. Keeping going dude. Hope to see more track videos from you.
Hey thanks a lot! Sure appreciate you hangin out and your positivity as well. Track day is coming! Looking forward to getting out there. I’ll be sure to film how it goes for better or worse hah
Just wondering what impact are you using on the crank pulley. Im in seach of one but I want one with the strength for crank pulley.
Check out Milwaukee
This one is from good ‘ol Harbor Frieght. If you really want a super torquey impact I’d check out the Milwaukee like the other comment here or the Craftsman
Awesome thank you
Dude!!!!!! Im so jealous of your car. It looks Sooooooooo Nice!!!
Woo! Thanks dude! I’ve got a big interior refresh coming up for the eg. It’s pretty gross from before, you’ll see.
On the timing.. I have so many questions regarding setting up timing 🙄. Like what if I swap a head, what do I do if the head doesn't have markings or words on the cam gear, does the block need to be set a certain way, what about the dizzy, etc.. gonna learn one way or another though 😂; at least glad I understand that I'm going to be working with an interference engine so I can try to manually crank it before breaking anything with the starter 😂
Kudos brotha! First starts are always a moment of intense 2nd guesses. Did I tighten this? Did I check that? So glad that she turned over and played nice....somewhat lol. I hope this is the beginning of many years of you enjoying your hard work and perseverance.
Lol you’re absolutely right! I spent a good while going over my mental checklist before even starting to film this. Sounds like you do the same!
It may be a mess but you learned from it. That's what matters in situations like this.
Sweet build man! What battery box are you running in the EG? I’m looking to buy one
I’m not sure of the brand off the top of my head, sorry. I believe I bought it off amazon a year ago or so. Check there, should have a good amount of choices. That or Pegasus Auto Racing Supplies. They have cool stuff
I like your Honda civic sir
Well thank you, sir
did you use a 0bd1 distributor? swapping the same d16a into my ef sedan!! already mpfi converted
Yeah, that’s right. I used the d15b7 obd1 distributor. Shouod work for you then
@@RefineMovement for sure thank you! Very cool build, d series all the way!!
Hey! My girlfriend and I really want to get this new shirt you released on your store. I searched through the store and it only comes in T-shirts. Are you able to provide a tank top option for us? Let me know if you can help, thank you!
I’ll look into it Michael, and post back here. Thank you for your support!
Hey man, the tank tops are up on the site if you still want to pick a couple up for you and your girlfriend. Thanks for your support dude! I know you’ve been around for a long time on the UA-camz
Refine Movement - Thank you so much! This is amazing!!!
Interesting, your d16a has that weird emissions piece @.59 seconds. The Y8 has that part too, I forgot what it was, but the damn part broke on Civic beater, not sure what it doesn't but it ran fine without it lol.
Good eye and actually I moved that entire water pipe and thermostat housing over from my Y8 previous, so it lives on through the d16a. Again, great eye you’ve got. I think it can be plugged with the proper size bolt and just delete that thing. I just have yet to look for that proper size bolt.
From what I understand that piece aids in warming up the engine to the temp it wants to be at for normal operation
Hey man I just seapwd a d16a into my y7 car what harness and ECU did u use and how did u get it to run I had issues getting spark due to the crank sensor
D16a non vtec you should be able to just swap over the long block. If I am in that spot I would use all the same everything around the longblock, literally just switch out the longblock. reuse everything wlse
hello dude! how u doing?
what is your engine build?
regards from Brazil
Doing well thank you! At the moment its a stock D16a with a Z6 intake manifold, and an Si transmission.
@@RefineMovement cool! I have a Hatch Si with D16Y8 and Kawasaki 37mm ITB's.
Where can you get those fresh post mount bolts on the timing belt side?
I got them straight from Honda! Your local dealership should be able to get them. They look good right?
I love this channel bruh👌🏽
Man, thanks a lot! Happy to have you hangin out
What wheels are those, they look sick 👌🏿
Thanks man! They are 949 Racing 6UL’s 15x8 +36 offset
How often do you guys post your videos?
Been posting 1 a week for the last few months. Always Mondays
what cables do you use for your battery?
Sorry I’m not sure the name of the brand. Supplies to make them can be bought from eBay or Pegasus Auto Racing Supplies
Why put that power robbing intake back on?
eg, it’s what I’ve got at the moment.
@@RefineMovement Fair enough brother. Keep up the good work
What part of Florida you from?
Central Florida
Yo, want to sell that ported y series pump?
No, sorry. I’ll actually be sending it back to Bad Guys soon
@@RefineMovement durn
Finally...like share and subscribe
When messi quit football
clean the underside of your hood. rest of engine bay looks good
Yeah it needs it. I repainted the rest of the bay
First!
Save the sohc!
Need a battery tie down
I have a strap that locks down the whole battery box, just isn’t hooked up in these clips
@@RefineMovement more so the actual battery inside the box. Timber won't work on track
👎🌎🚀🚘