Yes but you need!!! 2 ballbearings to bear the spring between the lever. When you dont use 2 the mechanism will go hot and starts to glow from the friction heat. www.dropbox.com/scl/fo/s44altzs0pvs4puxz4zwl/h?rlkey=wsp03lf7fiah80i2iid020tnb&e=1&dl=0
@@Kj-bq1xg its an easy build. The rod has to be as precise as possible in diameter so that the drillbit moves not out of center when you pull it down. It works for drilling only end mills break off like spagetti because of the runout. You can drill a hole but that is thanks to the V shaped drillpoint that selfcenters it self.
Hello, well done, do you have the link for the plan ?
Yes but you need!!! 2 ballbearings to bear the spring between the lever. When you dont use 2 the mechanism will go hot and starts to glow from the friction heat. www.dropbox.com/scl/fo/s44altzs0pvs4puxz4zwl/h?rlkey=wsp03lf7fiah80i2iid020tnb&e=1&dl=0
Thx you for the link and the advice! I will try to make it 😊
@@Kj-bq1xg its an easy build. The rod has to be as precise as possible in diameter so that the drillbit moves not out of center when you pull it down. It works for drilling only end mills break off like spagetti because of the runout.
You can drill a hole but that is thanks to the V shaped drillpoint that selfcenters it self.