PR 5000 V2 Update - 7 Months Later - Rep Fitness Power Rack
Вставка
- Опубліковано 13 січ 2021
- The Rep Fitness PR 5000 V2 is an amazing power rack which I highly recommend, even after consistent use for 7 months. I expect this rack to last a lifetime honestly, so I will keep you guys updated on how it holds up over the next few years!
PR 5000 V2: www.repfitness.com/strength-e...
IN STOCK GYM EQUIPMENT: www.repfitness.com/in-stock-i...
TEN THOUSAND CLOTHING: bty.tenthousand.cc/dakkak
15% OFF EVERY ORDER CODE USING: DAKKAK
SBD KNEE SLEEVE REVIEW: • SBD Knee Sleeve Review...
STRONG ELBOW SLEEVE REVIEW: • STrong Elbow Sleeve Re...
INZER LEVER BELT REVIEW: • Inzer Lever Belt Revie...
JOINT SUPPLEMENTS I USE:
Spring Valley Turmeric Curcumin: amzn.to/2Mx9y4J
Wiley’s Finest Peak EPA 1000mg EPA + DHA Omega-3: amzn.to/2F0xOYA
Move Free Joint Health Supplement: amzn.to/360NDux
Thank you guys for watching!
Your support is much appreciated!
Please drop a like, and subscribe if you haven't already!
Thank you guys for watching!
Your support is much appreciated!
Please drop a like, and subscribe if you haven't already!
Follow me on IG for more frequent posts/updates.
Instagram: Dakkakfitness
GEAR I USE:
CAMERA: amzn.to/2HP0O80
ZOOM LENS: amzn.to/2Z4c7ij
PRIME LENS: amzn.to/2HNDffY
BEST $50 JOGGERS: amzn.to/2QAzkpB - Спорт
PR 5000 V2: www.repfitness.com/strength-equipment/power-racks/pr-5000-v2/#5ea8188521d6f
IN STOCK GYM EQUIPMENT: www.repfitness.com/in-stock-items/#5ea8188521d6f
Keep up the great work!
Love the videos!! Inspired me to build a PR - 4000!!!
Glad to hear you are getting the lat/row attachment. I had to re-arrange my entire gym to fit one on my PR-4000 but it was definitely worth it. Makes the rack even sturdier too.
Can’t wait!
That rack looks amazing, nice setup.
Just saw this video. I just bought the rep pr 5000 in this same color scheme. I played football for the university of New Mexico and that’s the university’s colors. I’m doing my garage gym in those colors. Really glad I went with the clear coat red scheme.
I have the rep PR4000 blue powder coat, no problems with it scratching, but my sandwich j cups have plastic lining. I love yours though, I wish I would’ve went with the PR5000 just based on looks!
Love the videos, can you post a video of your failed lifts and comment on why they failed or how you go about adding accessory workouts to fix your lifts based on the lifts?
For sure! Good idea
I have the stuff havent used it yet because I'm moving in a new house soon then I'll open it up and finally use it.
Sweet video!
I have this power rack too. It’s Clear coat with 41” Metallic black cross members. I think the Multi grip pull up bar is awesome. Wish it was knurled but other than that it’s solid.
One thing to note: If you care about matching everything then I would go with Matte Black vs metallic because all of the attachments and jcups come in matte black.
I have the 41 and plate storage on the back post but sometimes I wish I got the 30 inch rack and went with the full 6 post. All depends on your budget and space !
Overall love the rack. I got clear coat because of Mohammad.
Just got a PR-5000 a few weeks ago and pretty much my only complaint so far is the pull up bar not being knurled. Have to stop in the middle of sets constantly to re-grip. But it still works beautifully, that's a minor complaint
Hey Mohammad, REP issued a safety recall for those affected. It was only a specific manufactured lot. If you haven’t received any notice, then you are not affected and should not worry about the safety strap failing. The weld on a specific lot was done incorrectly and thus, would not hold weight. They called me so many times that I thought they were spam. Ha ha but they finally left a voicemail and that’s how I was able to find out. They also emailed me but it went to spam. They seem to have really high quality customer service.
Mohammad you're going to be huge on UA-cam one day!
inshaAllah
Barakallahu fikum.....niiiiiice.
Just purchased the Omni rack 5000 series rack can’t wait for it to come in
How has that Omni been?
Great 👍👏👏
Clear coat looks superb! Nowadays they seem to offer only black, red and blue.
Bro requesting more of diet and workout tip videos please 🙏
That was my first long comment lol.
Last note would be that the Lowered J cups work so much better with the flip down safeties because the Jcups and the flip down won’t make contact really allowing that one inch space (:
Thanks for your insight!
I've been looking into the GR3 as an alternative. Would you recommend it?
Can you put your red crossmember(41''') to replace the pull-up bar? are those two exchangable?
How do you like those iron plates? I’m between those and the old school ones. Thanks for the video review!
Love em! The old school ones looks great too though! I love anything iron really lol
@@MohammadDakkak Awesome! Im more concerned with the weight being way off, so deciding between these or going more expensive with The Strength Co plates. What do you think?
@@this1fooItyler Hmm, if you're really concerned, then consider getting some calibrated plates. If not, I think these are okay, especially for the price.
@@MohammadDakkak So you think they’d be fine? Not really noticeable? Also gonna get the PR5000 I think
Ya I’d say my plates feel pretty even on each side. They’re not perfect but again they’re not calibrated. And nice I love my pr 5000!
Is that the Ohio cerakote bar? Also, do you worry about the concrete with deadlifting?
Do u know tje difference between the Strap safeties 2.0 and refular strap safeties for pr5000?
I
So the PR 5000 is the same as PR 5000v2. I built my rack at rep fitness its a pr5000. Iam a little confused I chose the 80" rack and 30" if I buy lat pull down attachment and stabilizer I won't need to bolt it down correct?? Will the rogue leverage arms work on this rack?
OK this is my dilemma.🙄
I currwntly have this set up PRX wall rack and separate valor lat pull down machine, separate rogue pull up bar, separate rogue band station with matador dip attachment and landmine (this is what I currently have right now) and many of other things.. I want the rogue arms so for that I will have to get another rack I think so I been looking at the one mentioned avobe..now if I get the pr5000 with lat pull down, rogue leverage arms, dip, land mind and pull up bar attachments I can sell all my other stuff and this way I will have everything consolidated in one rack..don't know if I will like everything cramped up in one place though🤔🤔. Or maybe just replace prx wall rack with rogue wall rack and keep everything else in separate stations like I have it now??🤔🤔
Did u paint the other parts red?
7 months later and I still have not seen this rack in stock =/
One of my friends was just able to put together his rack but he had to order different components separately. Best of luck man, I know it’s tough :/
I just put an order in today for the PR4000... red uprights with matte black cross memebers
You have to buy the components over time.
@@basedabdu8653 They have all the seperate pieces right now to build the PR4000 on their website.
You have to go to the REP Fitness website. Otherwise, idk what you're looking at? I bought my PR-5000V2 rack and attachments in November. It's been in stock. At least a couple times over the last 2 months. LOL
Does rep have lat pull down?
Rogue or rep? Help me decide both around 1400 shipped
You probably get more from Rep?
REP ships free anyways?
Salam bro. Great videos. I watch all your Ramadan videos and I would like to discuss with you some ideas. I’m 18 and on a Hypertrophy plan weighing at 195. Do you have an email or online Plato from where you do personal training that I can reach out to you and speak about Ramadan and lifting. All your Ramadan videos are great and these are too wanted to reach out to another natural brother who understands the natural process of lifting and Ramadan
Yes message me on IG: dakkakfitness
is that the 30 or 40 inch depth crossmember?
41”
is yours the 80 inch tall or 93 tall?
93
Bolt that baby down
يسسرررررر