Very detailed way of repairing. i think its first on youtube. Some print head using normal jetting with syringe does not unclog. This method cleans at new level.
terimakasih telah berbagi ilmu pengetahuan, dan telah memberi saya inpirasi, dan sekarang saya tidak penasaran lagi dengan isi dalam head print, trimakasih bro.....
Hi This is Dinesh from Fiji Islands. thanks , very good your description , ive also tried fixing, i have a large format printer with a DX-7 printheads and also a Belqutette 4 station DTF printer but But DTF printer is clogged and could not fix without sucess , but for ,my large sublimation printer, now am trying much deeper methods bit like yours. a question Just how do you apply glue in very thin sections just around the nozzles, it seems almost impossible without proper equipment.
Hello friend, first of all, thank you for this great contribution and advice that you give to all of us. I wanted to ask you how you put the glue without covering the holes before putting the plate, thank you very much for everything
This was a very good tutorial and maybe you should do this for others and get payed for the help of cleaning a Epson L1800 head, I dont have a L1800 printer but I will get one for DTF...🙏
Nice video, maybe only 1 of this type in the internet. imagine that you have explaination step by step for it. But how can you took out the orginal layers? I had like 20 of printheads, but not epson, I think I will try this way.
Hello, thanks for the video, I really needed it, I have several questions, 1. what are the ink removers, Thinner, Isoprofilic Alcohol and car paint remover, could that be? 2. the use of 2000 sandpaper, is it done to the entire part that has glue and when doing so does the sandpaper not damage the individual nozzles? 3. Can I get the sticker on Amazon? Or what alternatives do I have to buy another different sticker from the link, it's because they don't send me to Colombia
Hello, For the ink remover, I use a paint stripper (gel type) fast acting. When applying you should apply it until the ink is completely removed. Then to remove the paint stripper, I used paint thinner and carefully brushed it to the applied area. Lastly I will put the printhead into the ultrasonic cleaner to completely remove the paint stripper. For the sandpaper. Sand all the area of the printhead that the adhesive will be applied just to flatten all the surfaces. It should not be damaged, just be careful and do it slowly. I am not sure if the product is available on amazon. But I will try to find it on other online shopping sites. If I find it, I will put the link in the comment section.
hi sir. do you already encountered a x-hot error? it says that it's motherboard or printhead failure, and i already confirmed that the printhead that has an error since i have a spare defective printhead. epson L805 printer, 3 months head.thank you
Hello, I have a DTF Epson L1800 and I am having a problem with it not turning on. The power on the back does work, but power the button on the front won’t come on so nothing works. First started with two buttons on the front blinking red, then I turned it off completely about 2 or 3 times then now it’s not powering on. Can you help?
Not recommendad EPSON L1800 new relaced head BAD Experience Bad quality gives loss RS-8730 EPSON ahmedabad office and vcare service center to the customer vcare service and office ahmedabad gujarat india take car all take before cheking Not proper Answer india team
Very detailed way of repairing. i think its first on youtube. Some print head using normal jetting with syringe does not unclog. This method cleans at new level.
pls more tutorial , your info makes my brain hungry for more!! i love your content kabayan
terimakasih telah berbagi ilmu pengetahuan, dan telah memberi saya inpirasi, dan sekarang saya tidak penasaran lagi dengan isi dalam head print, trimakasih bro.....
Hi This is Dinesh from Fiji Islands. thanks , very good your description , ive also tried fixing, i have a large format printer with a DX-7 printheads and also a Belqutette 4 station DTF printer but But DTF printer is clogged and could not fix without sucess , but for ,my large sublimation printer, now am trying much deeper methods bit like yours. a question Just how do you apply glue in very thin sections just around the nozzles, it seems almost impossible without proper equipment.
Thank you for all the content you put together in the video
I would like for you to demonstrate this repairing of the printhead steps by video if possible. Thanks
this is realy honest way . thank . we would live the practical of it .
Hello friend, first of all, thank you for this great contribution and advice that you give to all of us. I wanted to ask you how you put the glue without covering the holes before putting the plate, thank you very much for everything
This was a very good tutorial and maybe you should do this for others and get payed for the help of cleaning a Epson L1800 head, I dont have a L1800 printer but I will get one for DTF...🙏
Hello... I'm looking to get a Dx7. Print head fix .. it is delaminated... Do you have a general estimate on how much it will cost ..thank you
Nice video, maybe only 1 of this type in the internet. imagine that you have explaination step by step for it. But how can you took out the orginal layers? I had like 20 of printheads, but not epson, I think I will try this way.
i think this video is the saint graal of printhead repair!
Where can I buy all of these parts separately? I'm wanting to refurbish a few of my old printheads to keep as backups
Cool video kinda draggged a bit but good stuff. Possibly a dx5 repair in future ?
Good guidance
Hello, thanks for the video, I really needed it, I have several questions, 1. what are the ink removers, Thinner, Isoprofilic Alcohol and car paint remover, could that be? 2. the use of 2000 sandpaper, is it done to the entire part that has glue and when doing so does the sandpaper not damage the individual nozzles? 3. Can I get the sticker on Amazon? Or what alternatives do I have to buy another different sticker from the link, it's because they don't send me to Colombia
Hello,
For the ink remover, I use a paint stripper (gel type) fast acting. When applying you should apply it until the ink is completely removed. Then to remove the paint stripper, I used paint thinner and carefully brushed it to the applied area. Lastly I will put the printhead into the ultrasonic cleaner to completely remove the paint stripper.
For the sandpaper. Sand all the area of the printhead that the adhesive will be applied just to flatten all the surfaces. It should not be damaged, just be careful and do it slowly.
I am not sure if the product is available on amazon. But I will try to find it on other online shopping sites. If I find it, I will put the link in the comment section.
Thaks Friend
Hello, I forgot to ask, which liquid to put in the ultrasound machine?
Saan makakabili ng glue idol?
@@jaimeGonzalez-cb9hn did you find the adhesive sir?
Guys the glue i use to stick those metal plates is Clear Epoxy resin A and B
Ultrasonic cleaner get the 75khz ones
What is your whatsapp number please. I need you to guide me on repair process.
Thank you I've been searching
all over to confirm if that would be a great glue and you solved my problem God bless 🙌
@@orbitalgrimoire1027 why 75 and not 40 ?
@@АлексейКошевой-з7з can you explain please?
is there a way to repair shorted dx5 head? no ink comming out of the nozzle but not clogged
hi sir. do you already encountered a x-hot error? it says that it's motherboard or printhead failure, and i already confirmed that the printhead that has an error since i have a spare defective printhead. epson L805 printer, 3 months head.thank you
Hello sir where do i use the distilled water and alcohol. and what solution needed in ultrasonic. TIA
how did you place the glue between nozzles?
HI, can you give some advise to change Head Manifold?
How do you apply the adhesive between all those nozzles so precisely?
Would be nice if you do a video of you actually doing the repair Hands-On
Hi I have 2 epson dx5 printhead and 1 epson dx7 printhead delaminated. Do you know a service to refurbish it? Can you fix them?
Hello, I have a DTF Epson L1800 and I am having a problem with it not turning on.
The power on the back does work, but power the button on the front won’t come on so nothing works. First started with two buttons on the front blinking red, then I turned it off completely about 2 or 3 times then now it’s not powering on. Can you help?
Sounds like your motherboard is fried!! Order a new motherboard!
After cleaning I get error 0x80 do you know what it means?
magkano po paayos sayo ng print head ng L1800?
I have thander jet printer but have some problem in mainbord
Boss, hm bili mo sa microscope? My Shopee link po?
How much pa repair ng head L1800 2pcs.
is this applicable for ecosolvent used printer head?
from where i can buy the glue
Do you sell print heads?
How do I remove the original layer of glue?
By Hair Dryer or Hot gun with Very low heat otherwise it will melt plastics.
thanks
Can I send you the printer head so you can fix it for me?
nice bro 👍
I call a local printer service man... Now my printer at epson service center...
any body can help me
how to apply adhesive on the plate
Bonding Adhesive Link (International Market):
Bonding Adhesive Link (Asia: Philippines Market):
shopee.ph/product/927553529/22270163985/
Hello how are you can you fix my print head I have like 4 need to get fix thank let me know plz
I want buy. But im from indonesian 😢, do you help me ???
You talk to slow.. much better u demonstrate with video than talking like a kid..
Not recommendad EPSON L1800 new relaced head BAD Experience Bad quality gives loss RS-8730 EPSON ahmedabad office and vcare service center to the customer vcare service and office ahmedabad gujarat india take car all take before cheking Not proper Answer india team
Hello... I'm looking to get a Dx7. Print head fix .. it is delaminated... Do you have a general estimate on how much it will cost ..thank you