Building the Tamiya 1/72 scale SPITFIRE Mk.Vb
Вставка
- Опубліковано 29 чер 2024
- I wondered whether to install an aerial wire, but decided it was unnecessary after referring to the following site.
spitfiresite.com/2010/04/spitf...
-------------------------
Kit information:
Tamiya 1/72 SUPERMARINE SPITFIRE Mk.Vb/Mk.Vb TROP.
Music information:
DOVA-SYNDROME (dova-s.jp/)
"浮かび上がる真実の系譜" (Music by MAKOOTO)
"Decision" (Music by roku)
"industrial zone" (Music by MATSU)
"lost in the fog" (Music by hotaru sounds)
"crux" (Music by まんぼう二等兵)
00:00 Unbox
01:56 Cutting parts off
02:27 Internal parts painting
08:35 Decal application(cockpit)
09:09 Cockpit assembly
09:44 Fuselage Assembly
12:08 Painting
23:36 Decal Application
28:40 Final Assembly
30:38 Completion - Авто та транспорт
Excellent model! Also thank you for sharing your techniques.
ive never seen that trick with the paper that was brilliant
eye candy. lovely result 👍
Lovely spit. Great work
Just ordered this kit from E-Bay mainly because I noticed it comes with an Aboukir filter and I’ve got some spare decals for an aircraft equipped with that sort of filter.
Superb, well done on this build. Looks great. New subscriber.
An excellent build. Finish is sublime!! One very very small observation if I may?…. The wingtip navigation lights are the wrong way around. Red should always be on the left (port side) of any maritime vessel or aircraft. When I was in the Royal Air Force, we were taught to remember that “The RED PORT was LEFT on the table”. Congrats again on a fabulous build :D
Thank you for pointing this out.
I made a mistake in painting according to the instructions in the manual. I should have looked into it because it felt strange.
It always feels strange because you want to thing "Right = Red"
The common phrase to remember is "Red Port Wine".
good job.
Got a new subscriber
Great build! I especially liked the color overlapping and modulation. Really nice effect.
Question: did you use glossy black base coat on purpose or would it be the same to use flat black?
Thank you for your comment!
Regarding the black color of the undercoat, I have not noticed any change between gloss and matte.
(I use the one with the larger inventory)
Wow,A stand with a 1/72nd aircraft kit.
Yes, If using a stand, a square hole must be made under the fuselage.
Excellent! Thank you!!
I’m starting the PM 5941 kit tomorrow. Could you share the glues you used & the manufacturer of the brushes?
Thank you!!!
Sorry for the late reply. I used below items.
Glue
Tamiya cement [Item No:87003]
Tamiya extra-thin cement [Item No:87038]
Brushes
Tamiya modeling brush high finish pointed brus (fine) [Item No:87049]
Air brush
GSI Procon boy platinum PS269(out of production)
*I recently bought a PS 289 to replace it.