Algolaser MK2 Homing Issue And Fix
Вставка
- Опубліковано 25 тра 2024
- On the first power up of the Algolaser Alpha MK2 the Y end stop microswitch was not hitting the stop causing some serious chattering. A minor adjustment to the switch fixed the issue.
This video augments my blog entry at:
hagensieker.com/2024/06/01/al...
Algolaser
algolaser.com/?sca_ref=452188...
Algolaser Alpha MK2
algolaser.com/products/algola... - Фільми й анімація
Hi there, I'm having the same issue but unfortunately the fix only works for a short time and it fails the homing again, seems like the gantry loses it alignment after the laser head travels some distance along the y axis, I tried to tighten the v wheels screws of the y axis rails but that doesn't solve the issue.
Can you please confirm if your issue is permanently fixed?
Cheers
Go to my blog linked in the comments and I have a video linked to Algolaser showing how to align the front end to hit the stop correctly. Mine seems to be fixed permanently by what I showed in this video.