When i was in high school im planning to install lpg to my scooter. Put the lpg hose to intake manifold or carburetor after the air cleaner. Never tried because i dont have enough money
I have watching you video, reading the manuals for installations and electrical wiring, I think this is biggest opportunity to my country and I want to be involved in doing this, I want to know how can I get your products
I am a car electrician. I have a question about the gas system. Why does the gas pump not stop when moving from the gas system to the gas system? Thank you.
Because you need to maintain a constant fuel rail pressure. Some systems will allow you to switch to petrol under high load or even a mixture of the 2 fuels. Also, some newer vehicles monitor the pressure and also fuel pump. cutting it would throw an engine light.
Hello, please ask your distributor for advise. We work closely with our official distributors wordlwide that advise local installers. www.prinsautogas.com/en/distributors
Sorry to be so offtopic but does any of you know of a trick to get back into an Instagram account?? I was stupid forgot my account password. I appreciate any tips you can offer me!
@Matias Edward Thanks so much for your reply. I got to the site on google and I'm in the hacking process now. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
Is it really when the car is running gas and up to a speed of up to 120 km / h, for example, a little bit of gasoline .. Is the fact that the car consumes gasoline while working with gas
zohir zouari ahmed the car would run really bad if that were the case, so no. you use gasoline because that is for the cold start. after 30 seconds or so it will switch to lpg.
there are some systems that can use petrol too if can not get enough lpg or switch itself on petrol if load is higher, or above some speed, but more often is case that petrol vopur is used to burn when pressure inside petrol tank rises because petrol pump works and heats up petrol but it is not used
If you want well ( in long term) operating system,mount the injectors VERTICALLY and keep the connecting houses ( between the injectors and the manifold runners) as short as possible. Vertical mounting usually allow you to keep the connecting hoses shorter . When the injectors are mounted as on the video ( horizontally) with the time they get clogged by the heaviest not evaporated fractions of LPG which are very sticky and especially when the temperature is low . Also the infectors plungers wear out much faster and injectors open / close times increases.
can red loctite or rtv silicone be used to screw in the nozzles?
When i was in high school im planning to install lpg to my scooter. Put the lpg hose to intake manifold or carburetor after the air cleaner. Never tried because i dont have enough money
I have watching you video, reading the manuals for installations and electrical wiring, I think this is biggest opportunity to my country and I want to be involved in doing this, I want to know how can I get your products
How can I get this CNG kite to or in Nigeria
Can you tell me where is the the fuel rail sensor on a 2015 dodge ram eco diesel please and that you
And how much does it cost
I am a car electrician. I have a question about the gas system. Why does the gas pump not stop when moving from the gas system to the gas system? Thank you.
guesss the car was designed for gasoline not methane so pump is on when ignition is on
Because you need to maintain a constant fuel rail pressure. Some systems will allow you to switch to petrol under high load or even a mixture of the 2 fuels. Also, some newer vehicles monitor the pressure and also fuel pump. cutting it would throw an engine light.
Now it can be installed with injector adapter , no need to drill the intake. Am I right or wrong, please help?
Hello, please ask your distributor for advise. We work closely with our official distributors wordlwide that advise local installers. www.prinsautogas.com/en/distributors
How much do these kits cost? I am from South Africa. Are they available over here? Are there spares available?
14k to 30k
How do you open the filter holder of the solenoid valve (180/802303 / B) to replace the filter?
Thank you
Sorry to be so offtopic but does any of you know of a trick to get back into an Instagram account??
I was stupid forgot my account password. I appreciate any tips you can offer me!
@Onyx Harper instablaster =)
@Matias Edward Thanks so much for your reply. I got to the site on google and I'm in the hacking process now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Matias Edward It worked and I now got access to my account again. I'm so happy!
Thanks so much, you saved my ass !
@Onyx Harper glad I could help =)
how do u undo the hose clamps ?break them off?
Correct
Is it really when the car is running gas and up to a speed of up to 120 km / h, for example, a little bit of gasoline .. Is the fact that the car consumes gasoline while working with gas
zohir zouari ahmed the car would run really bad if that were the case, so no. you use gasoline because that is for the cold start. after 30 seconds or so it will switch to lpg.
there are some systems that can use petrol too if can not get enough lpg or switch itself on petrol if load is higher, or above some speed, but more often is case that petrol vopur is used to burn when pressure inside petrol tank rises because petrol pump works and heats up petrol but it is not used
Hi, some people are specific about injector angle?
How does this affect performance?
Thanks
gravity effects performance, liquid always wishes to go with gravity and because propane is heavier than air it will always fall with gravity
gravity effect is negligible, because pressure inside is 2 bars- what is presure difference between 2 positions of injector-up/down-negligible
If you want well ( in long term) operating system,mount the injectors VERTICALLY and keep the connecting houses ( between the injectors and the manifold runners) as short as possible. Vertical mounting usually allow you to keep the connecting hoses shorter . When the injectors are mounted as on the video ( horizontally) with the time they get clogged by the heaviest not evaporated fractions of LPG which are very sticky and especially when the temperature is low . Also the infectors plungers wear out much faster and injectors open / close times increases.
why only a positive injector angle? how will a negative angle affect it? cheers
+matai mcintyre Probably because LPG is heavier than air and tries to go down instead of up.
why is important is lpg havier than air because in system is not air just lpg vapour on 2 bars
J'ai un broblem ,ma voiture ça coupe quand je la fais en gaz ,juste pour première et deuxième vitesse, 301 1.6 Ess
saya mau beli alatnya dimana bisa dapat harga berapa saya mau menggunakan gas elpji
Please contact your local distributor: www.prinsautogas.com/en/distributors.
saya di indonesia
@@agusofficial6893 please fill in a contact form on our site explaining your request: www.prinsautogas.com/en/contact.
could i install it in my car !! Peugeot 207 1.4 ess16v ??
abdelhak badis
Yes
abdelhak badis
Normalment vti 95 ch Yes you can instaled gpl.
Sir good day..i have toyota 2006 model LPG..it cranks but won't start .
does it start on petrol
who the fuck starts a vehicle with LPG on...
Excellent
বাই আমাকে ওয়ারিন টা একটু দেখাবেন
This is great
Туц-туц, туц-туц, туц-туц, туц-туц, туц-туц, туц-туц, туц-туц, туц-туц, туц-туц...
Terrible system!!!
why?