Hello, I have a question. Last year I used the DJI T30, and this year I will be using the DJI T50. While working last year, especially with the T40 drones, there were issues with interference from surrounding signals. Problems such as uncontrolled drifting, loss of connection with the controller, and veering off the automatic route occurred. It wasn't just one person; almost all the drones experienced this issue. It was said that the cause was the use of signal jamming technologies for missile test trials by the military. However, I don't fully agree with this. Not every drone was affected by this. The T30 I used wasn't affected, nor were drones from other brands. We usually work in rice fields and flat terrains. If we use an RTK system, can we prevent such issues? Or would adding an antenna to the controller to strengthen the signal solve this problem? Thank you.
Hello, I'm a newbie as well. If you had a leica antenna as a base station instead of the dji base station, can the drone software still connect to the leica base station?
Thanks for watching! The instrument height should be on that same tab. If you need any further help feel free to reach out to us via phone or email hubs.li/Q030Zwxt0
@ Thanks for your reply. Sir, actually I didn’t find instrument height option. Will you please share this screenshot where it’s put & what is the measurement method?
Hey no worries! Any DJI Drone that can support RTK can connect to this base station. DJI Mavic 3 Enterprise series, M350's / M300's and M30 series and more. Thanks for watching!
Hi i have a problem. I have RTK1 and M210. And now i bought M350 without RTK sensor (I know its versions are different) I wanna know can I connect my drone M350 to RTK1?
Unfortunately, the M350rtk is not compatible with RTK1 base station that works with your M210. However, if you have access to an NTRIP network, you could get RTK corrections for the M350rtk that way. If you have any more questions reach out to us here: bit.ly/3Kaka6V we can help you out with configuration and get you set up. Thanks for watching!
Hi, I'm new to this industry and doing a lot of learning. My work has this exact setup (D-RTK-2, M350 RTK, we also have P1 and L2). Does this eliminate the need to set ground control points prior to flying?
Hello, I have a question. Last year I used the DJI T30, and this year I will be using the DJI T50. While working last year, especially with the T40 drones, there were issues with interference from surrounding signals. Problems such as uncontrolled drifting, loss of connection with the controller, and veering off the automatic route occurred. It wasn't just one person; almost all the drones experienced this issue. It was said that the cause was the use of signal jamming technologies for missile test trials by the military. However, I don't fully agree with this. Not every drone was affected by this. The T30 I used wasn't affected, nor were drones from other brands. We usually work in rice fields and flat terrains. If we use an RTK system, can we prevent such issues? Or would adding an antenna to the controller to strengthen the signal solve this problem? Thank you.
Hello, I'm a newbie as well. If you had a leica antenna as a base station instead of the dji base station, can the drone software still connect to the leica base station?
Yes it can. Thanks for watching!
If i set the DRTK2 module a known coordinates, where i put the instrument height ?
Thanks for watching! The instrument height should be on that same tab. If you need any further help feel free to reach out to us via phone or email hubs.li/Q030Zwxt0
@ Thanks for your reply.
Sir, actually I didn’t find instrument height option. Will you please share this screenshot where it’s put & what is the measurement method?
Will any other DJI drone work on this base station or do we need to use the Matrice? Probably a dummy question, but I'm new to the space.
Hey no worries! Any DJI Drone that can support RTK can connect to this base station. DJI Mavic 3 Enterprise series, M350's / M300's and M30 series and more. Thanks for watching!
Hi i have a problem.
I have RTK1 and M210. And now i bought M350 without RTK sensor (I know its versions are different) I wanna know can I connect my drone M350 to RTK1?
Unfortunately, the M350rtk is not compatible with RTK1 base station that works with your M210. However, if you have access to an NTRIP network, you could get RTK corrections for the M350rtk that way. If you have any more questions reach out to us here: bit.ly/3Kaka6V we can help you out with configuration and get you set up. Thanks for watching!
Hi, I'm new to this industry and doing a lot of learning. My work has this exact setup (D-RTK-2, M350 RTK, we also have P1 and L2). Does this eliminate the need to set ground control points prior to flying?
You should still be using GCP's for better accuracy. Thanks for watching!
Mavics work with it.
You need to have the “top hat” on the drone.
You are correct. Thanks for watching!