Turning Scrap Wood Into a $40 Jewelry Box With a CNC Machine
Вставка
- Опубліковано 30 січ 2017
- In this video I put a piece of scrap wood into my small CNC machine and make a $40 jewelry box with a custom engraved monogram on the lid.
I sell these tiny wooden boxes for around 40 dollar each on buy/sell pages on FB. The custom engraving on the lid turn this into a great personal gift.
I made the box with the Shapeoko 3 CNC machine. It should be possible to make 3-4 boxes per hour.
If you are interested in the Gcode for this box please leave a comment.
I hope you like this video and want to give it a thumb up, share it, give it a comment and subscribe to my channel for more videos.
Become a patreon and I'll put your name on my Patreon hall of fame wall. Find out more:
/ schneider
Thank you for watching - Навчання та стиль
If you want the gcode file for this box please leave a comment below and if you like the video please subscribe to my channel. Thanks for watching.
Dieter Schneider Schöne Box und tolles aussehen! 👍Mit einer CNC kann man schon einiges machen.👍Grüsse von meinem Kanal😄
Sorry, but I don't speak German (I'm Norwegian even though my name is German)
Dieter Schneider Thanks for the info, so I did not expect. 😄 Great project and a beautiful look of your box. 👍 With a CNC can do a lot of cool things. Greetings from my channel 😄
Love to have the G-Code!
Excellent channel, you can and me gcode?
Stick vinyl on before carving with vbit will get your stencil for spraying
Great way to use leftover exotic wood scraps!
absolutely amazing
That is a great way to use up those little pieces of very good lumber that I find myself unable to throw away and saving for later. THANK YOU for the video.
Thanks, glad you found it useful
nice idea for a small and local bussines. Thanks.
Excellent Job!! These boxes are great for all sorts of objects! Thanks for sharing!
Thanks
Great little project!!! Thanks for sharing!
Thanks for watching
Hello Dieter, just find your channel. Great!
This is beautiful! Great job.
If you cut little boxes like this on a 45deg angle you get a consistant grain on all sides
Thats pretty smart
Looks really nice!
I've done something very similar on my shapeoko. If you were going to go into production I would suggest using your bandsaw to cut raw material to within 1/4 of finished size and then using a drill press vice for work holding. That way you have one operation to mill the outside and inside profiles, then flip it over and deck it off with another simple operation, no tabs required and much easier to secure/locate.
Great tip, thanks.
Amazing I wish I had the knowledge to program a CNC.
I've been CNC machining for few months now and really considering to invest in a laptop,cad and machine.
Love wood work that's my background but fell into CNC machining alloy and steel this really excites me
wow nicely done
Hermoso trabajo Dieter, una linda mezcla entre tecnología , arte y trabajo apasionado, Gracias por compartir
Thanks for sharing your idea. Great for using up some of my scrap wood.
WOW! I would love to get the G code from you and try this. Thank you
Great project. Loved the video. Have a Shapeoko 3XL, love it. The GCODE would be a bonus. Keep the videos coming. Thank you
Ask to pay for them
Awesome project, I would love the gcode, Thanks!
love the box would love the gcode great gift idea
I just bought myself a new rawcnc 2.0 machine and would be glad ho have the g-code
Really cute project.
Thank You :)
Great little project with just a small amount of material. Love the idea of spraying the gold paint into the monogram. Would love the G-code! Thanks.
Awesom, would be great for my daughter wedding.Thanks a lot
Would love the Gcode for this! Awesome build and use of scraps. Subbed for sure!
Awesome little box. Would love to have the gcode. I don't even have a shapeoko yet, but your video is making me consider leaning to the cnc compared to others.
Ask to pay for them
That is very awesome
Nice work Dieter! I appreciate you including production time. Please make GRBL files available. I subscribed and liked.
Great box. Just finished a multibot Cnc machine and it is working well. I subscribed and would love the g code. Thank you
amazing...........very pro
I am just now building my CNC. It will be awhile before it is running and I love to come across videos like yours for new ideas.
I would love to have your g-code.
Very cool, I would like to check out the gcode. Thanks for sharing.
Ask to pay for them
Love it! Great way to use up scrap wood. Like and subscribed. Any chance the gcode is still available?
Very nice, ever thought of using Oracal before carving the initial? Would love the GCode
I just ordered my shapeoko. I am collecting a few projects that I want to start with . One thing I like is making boxes. I would love your G-code to learn and understand.
Ask to pay for them
Hi Dieter saw and liked what you did just great.
Those boxes look cool. I would love to get the g-code for them.
Very nice.
Thank You
Nice box, perfect for an engagement ring, wowing her even more with her initial on the box. How do I get the plan.
Nice project I'll love to have geode
Like your video and your website. I'm just starting with CNC and I would like the g-code for the box. Thanks for being so generous to us newbie's.
Ask to pay for them
Very nice work! I would love to get the G code from you and try this. Thank you.
Ask to pay for the files
This is such a beautiful box. I would love to try this one out on my Shapeoko 3. May I please have the gcode?
Thanks mate that is one cute wee box, the plans wood be great if still available.
Ask to pay for them
Yes, I would like the gcode file for this cute box. Thank you!
would love the gcode if possible, great work
Beautiful things really do come in small packages. I would really appreciate the G code to try making one.
Ask to pay for them
Ser godt ud. Keep up the good work
Takker. I will :)
Dieter, excellent project. May I please have the G-code? Thanks -- look forward to more projects from you.
that one puff of paint had me rolling
Hello! Great job! do you still have the Gcode for this? Im looking for a project to start working on my CNC machine
Quite interested in the g-code. Thanks
Dieter very nice box, I would also like the gcode if you are still offering it.
Excellent work and if possible please could you forward the g-code as they would make excellent xmas gifts
Looks great. Nice job. If you still have the g code I would appreciate it
Excellent man craft.. Great video.. Really appreciate if you can give the gcode.. Thanks again..
Hi Dieter, wonderful content! I'd like that Gcode file for the box? my CNC is arriving soon and i'd like to tinker with it for my first project!:)
Grate video, tnx for sharing. I would like to ask you a suggestion about making small jewellery boxes like/similar the one you just did here. What is the most affordable cnc printer you will choose, on budget, just to do that? Thank you and good luck for your business.
beautiful work, would love the gcode please. Thanks
Hello i would love the gcode? It looks great! I may scale it up for the wifes pandora bracelet
Ask to pay for them
Very nice idea. I am interested in obtaining the Gcode for this project. Thank you
Very nice! I find that with a lot of paints, the wood absorbs a lot of the paint so that it shows even after sanding. Do you have any ideas on this; do you find that wiping off the majority of the excess (as you do) is enough?
Thanks. Wiping off helps but I also sand. As long as the engraving is dep enough it's not a problem. Another method is to finish it first then engrave and paint. This way the paint does not go down in the wood but it must also be sanded and finished again so it's more time consuming.
Thanks for the response! That last one is a great idea (while indeed more time-consuming); I'll see if that works for me.
a beautiful box, love to make one for the wife
I'd be interested in the gcode please. Excellent video!
Ask to pay for them
Dieter, nice work. I'll take the gcode if you don't mind still sharing please.
Great little box would love to get the g code for it and please do tell, what did you use to fill the carving. TIA
Thanks fpr the video great job Ive been trying to cut one out but never works put im new to cnc. would you be able to share the gcode or dxf so I can see what I'm doing wrong
Great project I would like the Gcode
Ask to pay for them
If you still have the gcode I would love to get them thanks great video
Would love to get this code. I just got a Shapeoko and this would be a good project.
super!!!👍👍👍👌👊
Thanks Nikos :)
This is great. Would love to have GCode file for this please.
Nice video, I have built a desktop cnc and would very much like the gcode please
Very nice work...I would love to have the gcode of this...Thanks...
Tolle Idee! Die Box würde ich gerne nachfräsen.
Awesome vid, I have just got a cnc of my own would I be able to get the gcode if it’s still available please
I would love the gcode
Great video! I would love a copy of the G Code. Thank you
Ask to pay for them
I like the box. Would like the Gcode please. Would like to make one. Thanks
Would you care to tell us more about the spindle and VFD you use? I grow tiered of my Dewalt (and noise that comes with it) and sure, the gcode would be nice. I'd love to try it.
I use a Makita router (I guess it's the same "class" as the Dewalt) so it's quite noisy as well. Here I'm using a 1/4 inch spiral cutter bit. I don't have VFD. I'll publish the gcode for download on my site soon (www.dieter.me)
I would love to have the G-Code for this!
great project...can you drop Gcode for this box...very interesting idea
Really cool! What software do you use to generate the gcode? I want to learn on how to use those V bits to do engraving. Thank you!
Thanks. I use a free program called F-engrave to generate the gcode and UGS (which is also free) to run the code
I would love the gcode file. Great work.
Ask to pay for them
thanks for sharing, what drill bit is that for the engraving?
Thanks for the video. Would you please send the g-code. This box will make a very nice gift.
I didn't know what country you are in, in my country I'll be lucky to sell this for 2$.
Still a nice piece of work.
Keep making such great ideas.
that is absurd statement.
Frenk Vortice
By ABSURD, You mean strange or silly?
Alaa Jannoud yes it is very nice but I agree 40$ for mostly machine made is a bit of a stretch I can see maybe 20$ with custom engraving now if this were completely hand made with regular power tools then I could see that price
Hi Dieter, on 5:23 where did you bought that paper? what is the name ? also could you please share a gcode
Hey sir, nice looking box. Do you still have the g-code for this?
I would love the gcode for my wife
Would appreciate the gcode. thanks!
Great! What material you use for the inside?
What is your technique to make the bottom and the lid snap together? Thanks
What brand/model machine do you use. I need to cut letters and lettering from wood . Whats the maximum working area for the machine?
Shapeoko 3. 40x40 cm
Hi Dieter, do you have the G-code available yet? Thanks
Awesome video! What kind of CNC do you have? What machine do you recommend for beginners? Thanks.
Thanks, it's a Shapeoko 3. It's the only cnc I have owned, but I'm very happy with the machine.
Hi, very nice work. Is it still possible to get the Gcode file? Thanks in advance.
One man's trash is another man's treasure?
very nice and good job will like to test it on my cnc
G code pls
Loved the video and would like the G-code please. And thank you
Ask to pay for them