I took the needle holder screw from my machine to the local hardware store and told them I need this same screw only twice as long. They found me the correct screw for less than a dollar. It fit!
I put this on my machine, at first it didn't work because it was out of alignment. I gently pressed the arm on the walking foot in a spring like manner to align it. It works GREAT. Perfect for quilting.
Thank you for doing this video. I have been wondering for a long time if there was a walking foot for industrial single needle machine for quite some time. I have the DDL 8700-7 that has back tack and thread cutter on it...... wondering if the little arm on the right side of the needle will get in the way.......I love this machine!
@@CB-hi7mf Hmmm, .....You replied 6 days ago to a 3 year old question...I have a similar need....Which hardware store?..The threading is 1/8"-44 and the original screw has a length of 4.5 mm...Thanks..
The other videos I have seen use an “M3” metric = M. The length is roughly 19mm or 3/4”. One inch is 25.4 mm so 13mm = 1/2”, 19mm = 3/4” and 25mm = 1” by package. I am a retired ASE Master tech who worked on vehicles like dealerships, but I see leather seats. Use a slow speed and position the foot and needle for no interference. Do not pull except lightly as this bends needle and can break. Hope this helps!
Taking a chance someone will reply.... will this walking foot work with the TL-2000QI better than the big bulky one that comes with it? This one looks smaller. My feeddog also cuts into the back when making vinyl bags. Can it be replaced with a Teflon feeddog and not do that? Thank you :)
Hi Dave I have a high shank ruffler. if i was to buy the long needle screw do you think it may work ok on my ddl8700 as its only the horseshoe shape that sits around the needle bar/screw on my Janome 6600p. Thank you in advance.
i got that walking foot from Goldstar. changed the screw but the stitching seemed to buckle at the lower fabric. And the stitch is too close. stitch #4
does the walking foot come with the heavy duty feed dog plate I have an odd machine It is a Mercury M-145-H industrial lockstitch for medium to heavy materials Could you help please
Thank you for the info about the walking foot. I have a Juki DDL 8700 that is about 10 years old now. I wonder if there is a way for it to do a zig zag stitch on any Juki and, 2., I have to put the needle in sideways because it never worked when the groove in the needle was facing me. Was that a malfunction in the factory? I have never seen a needle that installs with the groove in the needle facing the right side of the machine. Take care. Barbara
Barbara Mobarak hi. Can’t speak for other machines. But on 8700 needle groove is on right side. Also can’t comment on doing ZigZag on this machine but would love to know myself.
Most of the industrials, every brand, thread from left to right, not many at all thread from front to back. I have used many different brands for over 40 years. I am talking on a straight stitch single needle machines.
My question, is do you have to keep a slower speed when using the walking foot? They are useful for sewing fine fabrics like silk, tulle, etc. but I am afraid that I would need to sew much much slower than normal with my Juki. I hope you can respond to some questions. thank you
I have the same machine and the same light. The light isnt that great. I am using a magnifying light that attaches to the table now. Bought online. Amazon and Walmart sell several types. I bought the Bosch cause it has a lid cover.
I want to know what will happen if you change the thread to a leather thread? I am still researching butI have heard there are different types of threads for leather.
I've been wondering if you could fit a walking foot attachment to an industrial sewing machine. Just ordered the attachment from Goldstartools for my old Mitsubishi machine and looking forward to trying it out. Cheers from Melbourne, Australia
I would like to see a reply here or at least to someone else, can you confirm where you obtained the longer needle screw? I have tried several hardware stores and the threads don't seem to match up with the hole and I can't fully use the same sized screw. Or can you at least let us know if that's available for purchase through you. I already have a walking foot, I would like to use it with my DDL 8700.
I recently bought a screw to turn my ddl 8100e into a walking foot. I got the M3-05 x 12mm. I had a cord lock attached to the body of the screw so that the walking foot lever fits into it snugly when sewing. I hope I am making sense as I am explaining this at 146am. 😂 But that is the size of the screw we bought. It came in a pack of 3 at canadian tire.
Still Can't Locate the longer screw for the needle bar to make the walking foot attachment work on the DDL-8700...Have found the original screws (part# SS-7080510-TP) offered from a number of sources, but as for a longer one...No Joy...The spec size for the original is 1/8-44 ( 4.5mm long)...In the video it was indicated that I should have one in my cache of misc. spare parts...On many of the machines parts lists, the size is not even indicated, just referred to as "screw"...
I bought the walking foot from you and could not use it because I would have to change a screw I have no idea where to find I think you should include that screw 🫤
I took the needle holder screw from my machine to the local hardware store and told them I need this same screw only twice as long. They found me the correct screw for less than a dollar. It fit!
Did you happen to get the size from the store ?
Robyn Flanders she said yes
Thanks K, I'll try that
www.goldstartool.com/walking-foot-high-shank-even-feed-rwa2.htm
I have had my DDL 8700 for two weeks now thanks for your coaching I have never before sewed anything now Im having more fun than a barrel of monkies.
Good instruction. I hope you do more videos showing all the different attachments
I put this on my machine, at first it didn't work because it was out of alignment. I gently pressed the arm on the walking foot in a spring like manner to align it. It works GREAT. Perfect for quilting.
I read that if you moisten the eye of the needle, the dry thread is attracted to it and goes right in. I tried it. It works.
They sale needle threaders for pennies on eBay. I leave them everywhere to thread the machine. Works great for eyes that are not so good.
Thank you for doing this video. I have been wondering for a long time if there was a walking foot for industrial single needle machine for quite some time. I have the DDL 8700-7 that has back tack and thread cutter on it...... wondering if the little arm on the right side of the needle will get in the way.......I love this machine!
what about fluffy quilt like polyester minky material 4 layers with some quilting or felt in middle in between like a quilt? sewing a circle shape
What brand or part number is the walking foot. I have a single needle Juki DDL 8700. I love it.
Thank you for your videos, I have a Juki DDL8700H and enjoy learning from you.🤟
I can't find the longer needle clamp screw on your website. Do you have a link?
Hardware store.
@@CB-hi7mf Hmmm, .....You replied 6 days ago to a 3 year old question...I have a similar need....Which hardware store?..The threading is 1/8"-44 and the original screw has a length of 4.5 mm...Thanks..
Awesome! Great information on high shank walking foot for industrial machines!
What screw did you use for the needle set screw to hold the walking foot arm?
The other videos I have seen use an “M3” metric = M. The length is roughly 19mm or 3/4”.
One inch is 25.4 mm so 13mm = 1/2”, 19mm = 3/4” and 25mm = 1” by package. I am a retired ASE Master tech who worked on vehicles like dealerships, but I see leather seats. Use a slow speed and position the foot and needle for no interference. Do not pull except lightly as this bends needle and can break. Hope this helps!
Taking a chance someone will reply.... will this walking foot work with the TL-2000QI better than the big bulky one that comes with it? This one looks smaller. My feeddog also cuts into the back when making vinyl bags. Can it be replaced with a Teflon feeddog and not do that? Thank you :)
I would like to sew leather on the 8700 can you do a video on it.
Can I use the same method in this video with the Juki DDL5550N.? Thank you.
Hi Dave I have a high shank ruffler. if i was to buy the long needle screw do you think it may work ok on my ddl8700 as its only the horseshoe shape that sits around the needle bar/screw on my Janome 6600p. Thank you in advance.
i got that walking foot from Goldstar. changed the screw but the stitching seemed to buckle at the lower fabric. And the stitch is too close. stitch #4
does the walking foot come with the heavy duty feed dog plate I have an odd machine It is a Mercury M-145-H industrial lockstitch for medium to heavy materials Could you help please
hi would you please the name of your walking foot attachment. thanks
On a ddl-9000c I use Juki screw SS6081210SP SCREW 1/8-44 L=12
What type of walking foot for juki ddl-5550 it old machine with oil bottom. It has clutch motor since in 90s
Thank you for the info about the walking foot. I have a Juki DDL 8700 that is about 10 years old now. I wonder if there is a way for it to do a zig zag stitch on any Juki and, 2., I have to put the needle in sideways because it never worked when the groove in the needle was facing me. Was that a malfunction in the factory? I have never seen a needle that installs with the groove in the needle facing the right side of the machine. Take care. Barbara
Barbara Mobarak hi. Can’t speak for other machines. But on 8700 needle groove is on right side. Also can’t comment on doing ZigZag on this machine but would love to know myself.
Most of the industrials, every brand, thread from left to right, not many at all thread from front to back. I have used many different brands for over 40 years. I am talking on a straight stitch single needle machines.
My question, is do you have to keep a slower speed when using the walking foot? They are useful for sewing fine fabrics like silk, tulle, etc. but I am afraid that I would need to sew much much slower than normal with my Juki. I hope you can respond to some questions. thank you
I bought the foot but still can’t find the screw for it 😪
I love the light you’re using, where can I get this lamp to buy?
I have the same machine and the same light. The light isnt that great. I am using a magnifying light that attaches to the table now. Bought online. Amazon and Walmart sell several types. I bought the Bosch cause it has a lid cover.
I want to know what will happen if you change the thread to a leather thread? I am still researching butI have heard there are different types of threads for leather.
I've been wondering if you could fit a walking foot attachment to an industrial sewing machine. Just ordered the attachment from Goldstartools for my old Mitsubishi machine and looking forward to trying it out. Cheers from Melbourne, Australia
www.goldstartool.com/walking-foot-high-shank-even-feed-rwa2.htm
Is your attachment working for you. I want to use it for quilting on my Mitsubishi industrial. Any comments.
What happens when you go in reverse? For example, when locking stitches.
You gant go in reverse with a walking foot
Can this also work for DDL 8100?
sure
I would like to see a reply here or at least to someone else, can you confirm where you obtained the longer needle screw? I have tried several hardware stores and the threads don't seem to match up with the hole and I can't fully use the same sized screw. Or can you at least let us know if that's available for purchase through you. I already have a walking foot, I would like to use it with my DDL 8700.
I recently bought a screw to turn my ddl 8100e into a walking foot. I got the M3-05 x 12mm. I had a cord lock attached to the body of the screw so that the walking foot lever fits into it snugly when sewing. I hope I am making sense as I am explaining this at 146am. 😂 But that is the size of the screw we bought. It came in a pack of 3 at canadian tire.
Can that foot be used on a juki dl555
This was a great tutoral Thank yu so much for sharing..
Still Can't Locate the longer screw for the needle bar to make the walking foot attachment work on the DDL-8700...Have found the original screws (part# SS-7080510-TP) offered from a number of sources, but as for a longer one...No Joy...The spec size for the original is 1/8-44 ( 4.5mm long)...In the video it was indicated that I should have one in my cache of misc. spare parts...On many of the machines parts lists, the size is not even indicated, just referred to as "screw"...
SS6081210SP SCREW 1/8-44 L=12
Is this attachment still available???
yes
@@GoldStarTool I went to your website and typed in the RWA-2 and it said it was not found. Can you send me the link for it?
www.goldstartool.com/walking-foot-high-shank-even-feed-rwa2.htm
@@GoldStarTool thank you
Will this work on a pfaff 463 industrial sewing thread
I'd like to know too.
Hey thank's for the information going to try it
Thank you.. appreciate your efforts..
just replace your foot with roller foot much cheaper and not complicated. Peace.
Is roller foot working for sewing vinyl/PU leather?
Hi
Is this working on my JUKI DDL 8500?
yes
Where can I buy the walking foot and the long screw?
Good
Hello
I bought the walking foot from you and could not use it because I would have to change a screw I have no idea where to find I think you should include that screw 🫤