The bumper plates would be great for small led fog lights since now your missing a headlight. Why to crank out the vids keep it up. It's been months since my last upload.
The bumper looks awesome with the block off plates. And your right about the look of it when you paint it black it's all going to blend in 😍😍. Just make sure they aren't going to rub on the radiator because it could possibly wear a hole in it keep up the great work brother. You already know 💙💙💙
Also, save that template for the block off on the bumper I wished I would have had that as an option whenever I had my EF hatch you know they have an issue with cooling you may have just created a solution for the market it can go on the table with all the wings 😎💪
@@petrolhead8851 you're missing the point that tucked radiator is in the same position as most intercoolers so if you had a back door intercooler that would be great you could also trim to fit your setup and just use it as a base template 😉👍
Hey you should fix the door so you can paint it with the other parts. . Your videos motivate alot of us to work on our cars and hopefully when my son is older I can start a project car with him. Congrats on all your accomplishments and thanks for all the wisdom you share with us.
The fender cut outs work for drag racing too. The air that gets trap in the fenderwell acts as drag, wasting horsepower. You'll see those allot on 3 piece front ends🤘
Hella killer. Those bumper pieces look sweet. Even if they were left aluminum. (I agree black will look better though) glad to see Khaki getting some love again. #dbfam
I love this. I always thought it would be cool to make my Accord Wagon look more cyberpunky and I never realized that those little pockets like that actually did anything or if it was just aerodynamic styling. I think I'm going to try that now.
That plastic your talking about is called polycarbonate. Tap Plastics, Grainger has it. I think you should color match those aluminum pieces you added. Worst case you can always go satin black . Good luck 👍
Man! My eyes are playing tricks on me. Your logo looks like a Ninja to me!😂 I hope I’m not the only one that sees that. Anyways! Love the Content🤗keep up he good work and inspiration!☺️🙏🏼
Those end caps you built are dope! It would look sick if you put like 4 smaller sized offset dimple die circles in them to match the upper grill piece you have dimple died!
the diversion panels on the bumper are sick! only thing is, i think you'll optimize it even further if you angle or curved the side pieces so that they meet with the radiator cooling fins instead of meeting it at the edges. this would mean recreating them though..
Hell yeah late night upload ftw. BTW them bumper templates came out pretty nice. Probably look alot better when they're sprayed. Keep up the good work brotha!
I have a possible idea for you if you really, really want to keep the bumper grill and bumper bar on Khaki. I don't know how much space you need behind the bumper for it to fit, but if you swap out your fans for the low profile Spal fans you would gain a few inches where you could mount the radiator further into the support. It probably won't be enough space to put on the full oem bumper bar but you could probably just cut out a little bit of the bar, only on the back side of it to give you the space you need for the radiator to fit into. Now I know it kind of late for that because you already cut everything but I believe you still have that other EF in your back yard. You know the one you hate. lol Keep doing your thing man, i really enjoy your videos!
Dude it would look a lot cleaner if you hooked ur intake piping up to the headlight duct imo and it would also allow a lil more air to flow in easier rather than having the circle velocity stack poking thru it. Im pretty sure thats how its intended to be ran as well but, I could be wrong.
Great video, wheretf Junior at!? Coming through flossing, boy you better roll through and show some love and bring it back to the old skool we see the "egg" coming up... Can we get an update at least? Daaaaamn!
Bro my dond name tody too lol , hey nice prjejet I just got me a 1990 hatch , is in the paint shop getting the 2021 type R baby blue color , think big oh her I need to fallow your idea
Those bumper covers are genius
Love the feeling of showing off your car to your close friends and them supporting your build
Those bumper pieces you made for the cut out are so dope 🔥🔥🔥
Sick job on the bumper.
Juniors car has came along way!
Thank u bro it sure has. I’m trying. Lol
@@josemolina3745 your hatch is sick why don’t you have any videos
The bumper came out amazing. Khaki gonna be back to its former glory in no time.
The neighbors must you guys with all that noise. Especially when Junior comes over. 👌💯 It sounded good 👍🏾
Bruh, it’s 12:19am in Vancouver BC Canada 🇨🇦 and it’s my birthday.
I’d go back to sleep but you had to upload a video.
The front 2 pieces u made for the bumper, maybe paint them khaki.🤷♂️ I think it will look better.
The bumper plates would be great for small led fog lights since now your missing a headlight. Why to crank out the vids keep it up. It's been months since my last upload.
The bumper looks awesome with the block off plates. And your right about the look of it when you paint it black it's all going to blend in 😍😍. Just make sure they aren't going to rub on the radiator because it could possibly wear a hole in it keep up the great work brother. You already know 💙💙💙
Body color on those grill pieces could look pretty good as well. They came out really nice
Also, save that template for the block off on the bumper I wished I would have had that as an option whenever I had my EF hatch you know they have an issue with cooling you may have just created a solution for the market it can go on the table with all the wings 😎💪
For sure that would sell if people were running the tucked radiators on the Ef’s
@@petrolhead8851 you're missing the point that tucked radiator is in the same position as most intercoolers so if you had a back door intercooler that would be great you could also trim to fit your setup and just use it as a base template 😉👍
Can you show how junior made his headlight work with the v stack when he comes back
Hey you should fix the door so you can paint it with the other parts. . Your videos motivate alot of us to work on our cars and hopefully when my son is older I can start a project car with him. Congrats on all your accomplishments and thanks for all the wisdom you share with us.
Dude you also can paint the bumper peaces in kaki color. Or make it one with the bumber with epoxy or body filler.
Looking awesome brother 👍🏻
Just an idea maybe get 3or 4 pieces of round tubing and have them welded to each end cap making it look like a grill
awesome bumper block offs. its going to look awesome black. the fender is looking awesome also. cant wait to see it all painted
Shrouding the air to the radiator is definitely a great idea to maximize efficiency imagine some little 4-in fans to push on the front
Bumper is looking good! Radiator needs to go black too in my opinion matey
block off plates are a great idea💪💪
Whats good perfect timing just sparked up 😁🤌🏽
Glad I didn’t sleep yet heck yeah
Dope ass video!! Love the bumper
That came out really clean man! Great idea for the front bumper too!!
Once you do the front front wheel cycles the bumper bar
Dude, that looks soooo fucking good! (You should consider making more of these & putting em up for sale. )
When I need plastic materials, I buy pvc or abs piping and cut it in the center and then using a heat gun to flatten it out
It's looks 100 bro you did a great job on that front bumper it look 1000 times better
bumper pieces look awesome ! id paint the top of them black and the lower section body color.
Fuck yeah! Im really luvn this daily content. I really hope this channel hits 100k to get that sweet you tube award.
What other UA-camr do you know that has daily content?!! This guy!!!!💪 sheesh 🔥
Straight 🔥🔥🔥🔥
Hey Bravus, Have you tried to bolt the radiator on the inside of the frame instead of the outside maybe it would knock an half in or a inch in
Remember that he has clearing issues with the header.
Look sweet those block off plates!
The block off plates look like fangs 🔥
Bumper grille sections look awesome!
9:06 reason #3284 the neighbors love you so much hahahaha so funny
Maybe able to use that stuff that goes on the outside of a garden, alot of people use it for a cheap side skirt lol
The fender cut outs work for drag racing too. The air that gets trap in the fenderwell acts as drag, wasting horsepower. You'll see those allot on 3 piece front ends🤘
Keep up these constant uploads man!!
The bumper inserts give it a time attack look along with the splitter, looks good 👌👌
Hella killer. Those bumper pieces look sweet. Even if they were left aluminum. (I agree black will look better though) glad to see Khaki getting some love again.
#dbfam
Car looks even better up front, wait till after paint, gona look mean bro, ggz
I love this. I always thought it would be cool to make my Accord Wagon look more cyberpunky and I never realized that those little pockets like that actually did anything or if it was just aerodynamic styling. I think I'm going to try that now.
That plastic your talking about is called polycarbonate. Tap Plastics, Grainger has it. I think you should color match those aluminum pieces you added. Worst case you can always go satin black . Good luck 👍
Damm bro you coming from a long way for them throw back videos!!!
Hell Yeah Brother
💪💪💪
Nice Job DeadBeat .. . Maybe you can include fog lights in the spot your trying to fill.
Dope azz whip Jr..
Man! My eyes are playing tricks on me. Your logo looks like a Ninja to me!😂 I hope I’m not the only one that sees that. Anyways! Love the Content🤗keep up he good work and inspiration!☺️🙏🏼
I like the lil bumper caps. They will look sick black but for now they look like lil fangs! 👌😸
I like the shiny unpainted look.
Those end caps you built are dope! It would look sick if you put like 4 smaller sized offset dimple die circles in them to match the upper grill piece you have dimple died!
Progress on Khaki so far is 🤤🤤🤤 Those aluminum blockoffs are 👌
It is morning when I'm watching this video 10:23am 🙂
its night time in New Zealand but we here💪💪wat up wat up
You should do them wrinkled black
That eg race hatch is sick would you do a legit video over it
Go to Plastic Professionals or Professional Plastics out near 38th street and baseline I believe
the diversion panels on the bumper are sick! only thing is, i think you'll optimize it even further if you angle or curved the side pieces so that they meet with the radiator cooling fins instead of meeting it at the edges. this would mean recreating them though..
Once those block offs are black it will look dope
Keep up the great content hammering out banger's fire!!!!
Bro that bumper is sick what you think of seramic coating the two pieces that what they dont warp from the heat and take rock chips better
Thanks for the awesome content.
I think u should wait a bit to up grade the look on the front. To see if it's going to overheat
Those bumper pieces would sleek color match
Went to check UA-cam and seen this ayeee
Those pieces are perfectly to install some fog lights
I kinda like the bumper fillers aluminum. It makes it look like a vampire...
Midnight post are the best.
That front would be sick on venom kinda looks like fangs
Love the daily videos
Pait it all black and 🔥 🔥
It all looks 🔥
Love the cut fenders man
The new cutouts you made look like fangs maybe think about that when you paint them maybe some vampire teeth airbrushed on those new cuts
It came out sick bro
Love the bumper pieces looks clean
Hell yeah late night upload ftw. BTW them bumper templates came out pretty nice. Probably look alot better when they're sprayed. Keep up the good work brotha!
I have a possible idea for you if you really, really want to keep the bumper grill and bumper bar on Khaki. I don't know how much space you need behind the bumper for it to fit, but if you swap out your fans for the low profile Spal fans you would gain a few inches where you could mount the radiator further into the support. It probably won't be enough space to put on the full oem bumper bar but you could probably just cut out a little bit of the bar, only on the back side of it to give you the space you need for the radiator to fit into. Now I know it kind of late for that because you already cut everything but I believe you still have that other EF in your back yard. You know the one you hate. lol
Keep doing your thing man, i really enjoy your videos!
Good job brother
The bumper Looks dope kinda looks like vampire teeth Halloweens around the corner
Damn miss junior being on the channel
Kinda feel like you should put some fog lights in the block off plates you made.
Dude it would look a lot cleaner if you hooked ur intake piping up to the headlight duct imo and it would also allow a lil more air to flow in easier rather than having the circle velocity stack poking thru it. Im pretty sure thats how its intended to be ran as well but, I could be wrong.
Could be cool.to put some extra fog lights in those block off plates
That looks dope. Dopest dope ive ever smoked
What about painting them khaki?
Halloween spirit on khaki the silver fangs
Great video, wheretf Junior at!? Coming through flossing, boy you better roll through and show some love and bring it back to the old skool we see the "egg" coming up... Can we get an update at least? Daaaaamn!
6am good morning to you too 😂
I knew there was a reason I randomly woke up 😂
Great vid.
His dog wants all the issues🤣🤣🤣
3:55am socal
Looks good
I don't see the link to that video
Looks decent. Fenders are sick tho
Love it!!!!
Bro my dond name tody too lol , hey nice prjejet I just got me a 1990 hatch , is in the paint shop getting the 2021 type R baby blue color , think big oh her I need to fallow your idea