שלום! Masterfully designed! Simplex in build and ingeniously conceived. I am making a jumbo wall rosary with 60 chain beads +spares. They must be 2 1/4” round. What size cube would you suggest beginning with to achieve this? Thanks for the idea!~
I love ideas like this hahaha, I’m gonna build one this week, I have left over pine board perfect for the enclosure! hahaha Awesome idea fantastic results, Thanks for sharing! Cheers!! 🍻🍻
My god, I’m paying a guy a fortune to turn the blocks of wood i already cut, not balls, then I still have to take them and drill holes in them for parrot toys, I have 2 angle grinders I could spare, did you do a how to on the build, if not will you please..I’ll sub, like..this is obviously the comment and I’ll turn on post notes, just in case you post that, no joke I’m paying him €3 and I provide the blocks of wood, am I getting ripped off, he says he uses a lathe, but I’ve never seen one, I treated myself to a mither saw last week but I’m a little scared of it…I set it up and did one cut, but I need a new spot for it taught a place in the corner of the bird room would work when the birds are inside …sorry felt like I had to say..but I can’t fit longer pieces of wood in there so may rethink it’s location..I need a tools shed at the rate I’m buying tools, I just don’t know how to use most of them effectively, to get the best from them..I’m a diy newbie, it drives me mad, stuff like changing the disk’s on my two angle grinders, I’ve two because the centre nut in my 1st got so tight on there I gave up and decided to get another one, and have two different disks on them use one for sanding and another for a different grit..is there a tip to move those..there’s a few things like that that drive me nuts, another is drilling holes in wood, I need all sorts of sizes of holes, I make parrot toys for my own birds but if I could do my own balls of wood faster or at all because I pay someone to do it right now, so I got a drill thinking ,,cool I’ll drill holes, get a strong drill , cordless I taught would be handy, n omg I just wanted to drill holes, ppl in shops tell me I can’t drill holes at all with a hammer drill, do I need one of those other drills for that job, so I couldn’t find wood drill bits to fit my drill, it’s a head reck trying to drill a god dam hole, u have no idea the frustration it as caused me, even just trying to get a drill bit turned into a shit show..then I got one of those round things with teeth, the drill bit is for wood it cuts core’s from the wood..but it is stuck to the drill attachment..I took the drill bit off with the nut on the side, but it’s on there so tight, I don’t even have a male neighbour I could ask to unscrew it….I’ll guess I’ll have to do as I did with the angle grinders, get more than one…
So we just have to guess what tool is inside and how it’s built???
That’s no fun
It’s a sander and you see him change the sanding disc
Great idea! How did you make the machine, and can it be made to produce 6-8" balls?
ua-cam.com/video/ERhlOiewVAA/v-deo.html
שלום!
Masterfully designed! Simplex in build and ingeniously conceived. I am making a jumbo wall rosary with 60 chain beads +spares. They must be 2 1/4” round. What size cube would you suggest beginning with to achieve this? Thanks for the idea!~
Do you mind if I get a little details? like what is the machine down there ? is it a router?
thank you so much
regular sander
I love ideas like this hahaha, I’m gonna build one this week, I have left over pine board perfect for the enclosure! hahaha
Awesome idea fantastic results,
Thanks for sharing! Cheers!! 🍻🍻
Very Nice and innovating! Thanks for sharing.
What is that machine?
What bit did you use on the pony router?
WTF? I think I’ve seen 1 of these on “The Price Is Right” TV Game Show with Bob Barker? You Rock ma man! Will you do Plinko next ?
It is possible to make more than one ball at the same time?
Good question , maybe yes but I didn’t try it , I also think that it will take more time
way to demonstrate that it CAN be done without showing HOW it can be done
very informative 🤨
thanks. I own both vacuum and da. I will build it tomorrow. once again thank you
is it a sander or an angle grinder?
Angle grinder with sand paper
Not bad!
I am looking for....how to make it not how you make it 🤗
Wouldn't it just be less hassle to buy beads?
Of course it is , but What will you do if you dont find the peace that you need ??
My god, I’m paying a guy a fortune to turn the blocks of wood i already cut, not balls, then I still have to take them and drill holes in them for parrot toys, I have 2 angle grinders I could spare, did you do a how to on the build, if not will you please..I’ll sub, like..this is obviously the comment and I’ll turn on post notes, just in case you post that, no joke I’m paying him €3 and I provide the blocks of wood, am I getting ripped off, he says he uses a lathe, but I’ve never seen one, I treated myself to a mither saw last week but I’m a little scared of it…I set it up and did one cut, but I need a new spot for it taught a place in the corner of the bird room would work when the birds are inside …sorry felt like I had to say..but I can’t fit longer pieces of wood in there so may rethink it’s location..I need a tools shed at the rate I’m buying tools, I just don’t know how to use most of them effectively, to get the best from them..I’m a diy newbie, it drives me mad, stuff like changing the disk’s on my two angle grinders, I’ve two because the centre nut in my 1st got so tight on there I gave up and decided to get another one, and have two different disks on them use one for sanding and another for a different grit..is there a tip to move those..there’s a few things like that that drive me nuts, another is drilling holes in wood, I need all sorts of sizes of holes, I make parrot toys for my own birds but if I could do my own balls of wood faster or at all because I pay someone to do it right now, so I got a drill thinking ,,cool I’ll drill holes, get a strong drill , cordless I taught would be handy, n omg I just wanted to drill holes, ppl in shops tell me I can’t drill holes at all with a hammer drill, do I need one of those other drills for that job, so I couldn’t find wood drill bits to fit my drill, it’s a head reck trying to drill a god dam hole, u have no idea the frustration it as caused me, even just trying to get a drill bit turned into a shit show..then I got one of those round things with teeth, the drill bit is for wood it cuts core’s from the wood..but it is stuck to the drill attachment..I took the drill bit off with the nut on the side, but it’s on there so tight, I don’t even have a male neighbour I could ask to unscrew it….I’ll guess I’ll have to do as I did with the angle grinders, get more than one…
"How to troll"
Very Cool
Lovely but it takes too long !!
Oh, looks like an angle grinder
I subscribed so you wouldn’t have 666 subs anymore 🙏🏽
Thank you !
@@mikaelbenitah7774 you’re welcome. That’s not the only reason it’s just one of them lol. Just reread my first comment. Sounded kinda rude.
Производительность фантастическая.
Smart
Great .
А ви робите намістинки сині і жовті
Super
Demorado, mas legal!
au top!
?????????????????????????
Not a perfect sphere and a waste of time
You should do a demo in the Gaza strip.
Clicbait