Link to aliexpress alitems.com/g/1e8d114494cb5d5bb76d16525dc3e8/?ulp=%E2%82%AC%204%2C24%20%2029%25OFF%20%7C%20C6%20H1%20H3%20Led%20Headlight%20Bulbs%20H7%20LED%20Car%20Lights%20H4%20880%20H11%20HB3%209005%20HB4%209006%20H13%206000K%2072W%2012V%207200LM%20Auto%20Headlamps%20https%3A%2F%2Fa.aliexpress.com%2F_mtzWWiX
This video gave me courage to remove my front bumper to replace my xenon bulb. My hand could not fit from the tyre well so I had to remove the bumper. Cheers!
Its worth it honest it is, they look class but its just a bit messy to get them in there, then the possibility of them not working in 6 months but sure just try it.
@@GPTV2020 just a quick question where did you get the bulbs and the bag of plastic clips. The headlamp and grill in my honda are slightly different they most have done a facelift at some stage.
Yes the face-lift was done in 2011, headlights are the same just different colour and front bumper and grill is different. Got them from ali express! I will try post a link here.
Great and informative video mate! I'm about to remove my bumper as well and would follow your video. Only difference between our bumpers is that mine has the headlight washers which I think I have to remove the covers first.
Thanks alot. Some people are saying that they don't need to remove the bumper they have access from the wheel well. I found it very difficult from there, you will probably find an easier way yourself but this way works for me. Good luck.
Subscribed without hesitation. The only video (and the other one too) that gives precise blow by blow account of how to do this. I’m not sure how anyone can get the bulb changed from the wheel well. It looks impossible. I’ll just follow your style. I spent more than 40 minutes at Halfords…..they had no clue. Now I have the confidence to do it (mot failed because of this!). One request, if you don’t mind. I know it’s been about three years, but what tools, including sizes did you use? Your power tool, is it just a standard one? Link to where you bought those retainers? Thank u.
Hey thanks for your comment 👍. Standard Phillips head screw driver, and a flat head to remove the plastic clips. 10 mm socket with an extension to reach under the headlights (about a foot long extension) a long nose pliers to remove the clips fully. And this is an amazon affiliate link to a variety box of these clips. amzn.to/4a4LQ8V. Hopefully it's not too difficult for you.
Good video mate. I've two Accords. 2004 executive vtec petrol, and picked up an 2009 GT 2.2 diesel last week. Not looking forward to replacing these bulbs at all. I've leds in the petrol Accord. 2nd set now. 1st set lasted 3 years!!! I also had them led reg lights like yours but both started flickering after a year or so. Put the standard ones back in for now. I have a fresh set to put in when I get time. Alloys look cool, very nice.
Thanks for your comment, yeah they are difficult enough to replace when there is no need for them to be so hard to replace, i just always buy two sets so if they start flickering or stop working i can replace right away.
Hi ,nice video , one question , is that possible that when somebody changed Xeon bulbs then partner could be gone? I had my bulbs exchanged however pattern is gone from low beam light
Hey, i have an affiliate link in the description to everything i use, these are the two affiliate links to the clips anyway. If you have a trim removal tool it is easier to remove them and it's possible you will not break them, so you may not need to buy the clips before hand. But it's better to have it and not need it! 😂
Thanks for the detailed video. I`m trying to find any information on the height adjustment for my 08 Tourer, and so far I was not able to find anything else. With your close-up of it, I might have an idea what I need to do, so heading to the car now.
@@GPTV2020 pretty sure I'll get it done. Just need to buy a longer screwdriver. All my longer ones are too thick for that gap with the headlight in place. Again, thank you for all the details in your videos!
Awesome vid! For my CU2 ( I have the 4 cyl variant) I believe the USDM comes with HIDs for low beam stock well at least mines has. I didn’t have to remove the bumper. As for my DRLs I’m using a dual beam LED from Auxbeam. I’ve had them for about 2 years now. I have some what of a short cut to get to the fog lights as well. Here’s a suggestion if you’re open to it, purchase the After market Acura headlights. I wish I could post a pic for you to see. Also the trunk release boot release switch in the middle of those rear plate lights, does it still work?
You can post a pic to my Instagram instagram.com/gptv2020?igshid=1gy3gj41mmwdv Id like to see them, i was looking at getting the newer 2011 European headlights in the future they have clear indicators. I have see those leds, but i wanted to see how good the cheap ones are first.
I assume this is the 2.2 idtec are you planning to do a headunit upgrade? Cus I've been looking everywhere for a decent plug and play headunit for mine. Great video btw
I have the same honda i need to change the grill and this night the left low beam bulb died 😁 my plan was to put led's but if i put the led bulbs I'm gonna remove the lids log beam seems fine without lids. Advise? 😊
You could get moisture inside on the lens then, but someone here gave a tip and said drill 3 holes at the top and 3 holes at the bottom and that works so try that.
Would you believe it if i told you i just done my nct today and it passed but i need a headlight alignment, they said they LEDS were fine. But hey you know how it is here, they could pass in mine and fail in yours!
My covers over the H1 are both missing, the headlight unit has not fogged up yet in over a year..! Maybe leave them off yours so the fans can do their job.
Hi, just srew 3, 3mm hols on buttom und top side, driving with this Setup 4 Year this my Vw Golf 4 on northsea-side in Germany. No problems bis condensation.
@GPTV2020 thanks bro actually I ordered the black grill with black badge I'm just looking how to install after looking your video it seems easy Thanks brother 😊
Sorry for the late response, very busy. No on my car it is H1 for the dipped beam, 9005 for the high beam and H11 for the fogs. I think some cars are different like acura tsx or newer 2012 accords.
I took my bumper off on mine today to change the bulbs 😭 started at 12pm. Put yellow leds in the fogs too. Got bumper clips from Wish also, I think about 5 original ones survived. Sorry to hear about the CRV, absolute cu*ts! Dying to know what's up with you're Accord, surely can't be dpf again?
Lol when i know for sure then you'll know!! Anyway yeah its a job to change them bulbs, spots are not bad, and them clips 😡 but well worth it! I know some people are just out to make other peoples lifes harder.
@@GPTV2020 I didn't put leds in the dipped beam though, just Osram blue 4200k. Don't fancy taking that bumper off in 6 months time 😂 I tried the method in the manual first but couldn't get at it, my arms and hands look like I've been attacked by a tiger 🙄 changednthe clutch and flywheel 2 weeks ago... €1500 parts and labour. So screw that, got both myself brand new online for €550. Then €250 to my mechanic. 4 days without the car.
4 days without but saved 800 quid and saved yourself from looking like a tiger attacked you again! Lol. I always get people to do the hard jobs, its less cost and saves time so you can do whatever. The rich man isn't the mechanic its the bloke that owns the garage.
Why change the bulbs ? Surly not because they are a bit brighter? Why , no point!! Unless your doing a night rally or want to blind other drivers 😙. Don’t waste your money 👍
I see your point but no really, they are a lot brighter and clearer on dark roads, i live on darker roads so its a safety matter plus the colour is a lot nicer then the warm glow of the halogen ones, like using a candle to see where im driving.
As much as I love my accord, I hate to change H1 bulb. It's pretty fuckin ridiculous (excuse my language) Can somebody tell me why Honda done such a stupid thing? I honestly hate this...btw thanks for nice video. Greetings from Switzerland...
Link to aliexpress alitems.com/g/1e8d114494cb5d5bb76d16525dc3e8/?ulp=%E2%82%AC%204%2C24%20%2029%25OFF%20%7C%20C6%20H1%20H3%20Led%20Headlight%20Bulbs%20H7%20LED%20Car%20Lights%20H4%20880%20H11%20HB3%209005%20HB4%209006%20H13%206000K%2072W%2012V%207200LM%20Auto%20Headlamps%20https%3A%2F%2Fa.aliexpress.com%2F_mtzWWiX
This video gave me courage to remove my front bumper to replace my xenon bulb. My hand could not fit from the tyre well so I had to remove the bumper. Cheers!
Your very welcome
I have to say your videos are great! Genuine guy helping us with your tutorials. Fair play man 👍
Fantastic comment thank you so much.
I was going to swap all my bulbs in my 2011 Accord to led, but after watching your video, i wont bother. So thanks enjoy the channel
Its worth it honest it is, they look class but its just a bit messy to get them in there, then the possibility of them not working in 6 months but sure just try it.
@@GPTV2020 just a quick question where did you get the bulbs and the bag of plastic clips. The headlamp and grill in my honda are slightly different they most have done a facelift at some stage.
Yes the face-lift was done in 2011, headlights are the same just different colour and front bumper and grill is different. Got them from ali express! I will try post a link here.
€ 4,31 30%OFF | C6 H1 H3 Led Headlight Bulbs H7 LED Car Lights H4 880 H11 HB3 9005 HB4 9006 H13 6000K 72W 12V 7200LM Auto Headlamps
a.aliexpress.com/_m0jzVP7
€ 3,71 26%OFF | Factory Price!!! 100PCS Black Plastic Rivet Car Fender Bumper Push Pin Clips 10mm Hole For Honda Wholesale Quick delivery CSV
a.aliexpress.com/_mMJEeN7
Thanks to your help I have managed to change mind that went off 2 days ago. I will share your content in the Honda page UK. Good job man
+rene obuka your very welcome, im glad it was helpful and thank you very much for sharing, thats great thanks again.
Great and informative video mate! I'm about to remove my bumper as well and would follow your video. Only difference between our bumpers is that mine has the headlight washers which I think I have to remove the covers first.
Thanks alot. Some people are saying that they don't need to remove the bumper they have access from the wheel well. I found it very difficult from there, you will probably find an easier way yourself but this way works for me. Good luck.
well done, your geting better n better on editing bud :)
Thanks a bunch pal.
It was nice to watch, I like that way 😎👍 keep up good work
I like to change it up a bit, because everyone is different and like things a different way. Just hit 60k views too!
Congratulations 👍👍👍
Very appreciate for what you are doing !
Thank you for your comment and support.
Subscribed without hesitation. The only video (and the other one too) that gives precise blow by blow account of how to do this. I’m not sure how anyone can get the bulb changed from the wheel well. It looks impossible. I’ll just follow your style. I spent more than 40 minutes at Halfords…..they had no clue. Now I have the confidence to do it (mot failed because of this!). One request, if you don’t mind. I know it’s been about three years, but what tools, including sizes did you use? Your power tool, is it just a standard one? Link to where you bought those retainers? Thank u.
Hey thanks for your comment 👍. Standard Phillips head screw driver, and a flat head to remove the plastic clips. 10 mm socket with an extension to reach under the headlights (about a foot long extension) a long nose pliers to remove the clips fully. And this is an amazon affiliate link to a variety box of these clips. amzn.to/4a4LQ8V.
Hopefully it's not too difficult for you.
Good video mate. I've two Accords. 2004 executive vtec petrol, and picked up an 2009 GT 2.2 diesel last week. Not looking forward to replacing these bulbs at all. I've leds in the petrol Accord. 2nd set now. 1st set lasted 3 years!!! I also had them led reg lights like yours but both started flickering after a year or so. Put the standard ones back in for now. I have a fresh set to put in when I get time. Alloys look cool, very nice.
Thanks for your comment, yeah they are difficult enough to replace when there is no need for them to be so hard to replace, i just always buy two sets so if they start flickering or stop working i can replace right away.
Hi ,nice video , one question , is that possible that when somebody changed Xeon bulbs then partner could be gone? I had my bulbs exchanged however pattern is gone from low beam light
Hi! What is the correct size for push clips please? Look like I need one package before start doing this. :D Thank you!
Hey, i have an affiliate link in the description to everything i use, these are the two affiliate links to the clips anyway. If you have a trim removal tool it is easier to remove them and it's possible you will not break them, so you may not need to buy the clips before hand. But it's better to have it and not need it! 😂
Thanks for the detailed video. I`m trying to find any information on the height adjustment for my 08 Tourer, and so far I was not able to find anything else. With your close-up of it, I might have an idea what I need to do, so heading to the car now.
Thanks for your comment. Hopefully it helps.
@@GPTV2020 pretty sure I'll get it done. Just need to buy a longer screwdriver. All my longer ones are too thick for that gap with the headlight in place. Again, thank you for all the details in your videos!
Awesome vid!
For my CU2 ( I have the 4 cyl variant)
I believe the USDM comes with HIDs for low beam stock well at least mines has. I didn’t have to remove the bumper.
As for my DRLs I’m using a dual beam LED from Auxbeam. I’ve had them for about 2 years now.
I have some what of a short cut to get to the fog lights as well. Here’s a suggestion if you’re open to it, purchase the After market Acura headlights. I wish I could post a pic for you to see. Also the trunk release boot release switch in the middle of those rear plate lights, does it still work?
You can post a pic to my Instagram instagram.com/gptv2020?igshid=1gy3gj41mmwdv
Id like to see them, i was looking at getting the newer 2011 European headlights in the future they have clear indicators. I have see those leds, but i wanted to see how good the cheap ones are first.
drill some holes in the cover?
Take that into account.
I assume this is the 2.2 idtec are you planning to do a headunit upgrade? Cus I've been looking everywhere for a decent plug and play headunit for mine. Great video btw
Yes It is the 2.2 idtec cu3 n22b1 but no on the headunit, im not doing any upgrades any time soon. Thanks for your support
I have the same honda i need to change the grill and this night the left low beam bulb died 😁 my plan was to put led's but if i put the led bulbs I'm gonna remove the lids log beam seems fine without lids. Advise? 😊
You could get moisture inside on the lens then, but someone here gave a tip and said drill 3 holes at the top and 3 holes at the bottom and that works so try that.
Will the NCT pass the LED bulbs?
Would you believe it if i told you i just done my nct today and it passed but i need a headlight alignment, they said they LEDS were fine. But hey you know how it is here, they could pass in mine and fail in yours!
If u got a 2.4l petrol pretty easy don’t have to remove the bumper just the battery than u can access it
My covers over the H1 are both missing, the headlight unit has not fogged up yet in over a year..! Maybe leave them off yours so the fans can do their job.
Hum really 🤔? Ok if they go again maybe i will look at doing that so! Good man thanks for that.
Hi, just srew 3, 3mm hols on buttom und top side, driving with this Setup 4 Year this my Vw Golf 4 on northsea-side in Germany.
No problems bis condensation.
Cool i may do that so thanks
Bro how to remove the front grill 😊
@@deepbx7886 in this video i show how to remove the grill ua-cam.com/video/vLLl5d6BRUs/v-deo.html
@GPTV2020 thanks bro actually I ordered the black grill with black badge
I'm just looking how to install after looking your video it seems easy
Thanks brother 😊
@deepbx7886 yeah it's not hard.
High beam is H7?
Low beam H1?
Fog lights H4?
Is that correct?
Sorry for the late response, very busy. No on my car it is H1 for the dipped beam, 9005 for the high beam and H11 for the fogs. I think some cars are different like acura tsx or newer 2012 accords.
I took my bumper off on mine today to change the bulbs 😭 started at 12pm. Put yellow leds in the fogs too. Got bumper clips from Wish also, I think about 5 original ones survived. Sorry to hear about the CRV, absolute cu*ts! Dying to know what's up with you're Accord, surely can't be dpf again?
Lol when i know for sure then you'll know!! Anyway yeah its a job to change them bulbs, spots are not bad, and them clips 😡 but well worth it! I know some people are just out to make other peoples lifes harder.
@@GPTV2020 I didn't put leds in the dipped beam though, just Osram blue 4200k. Don't fancy taking that bumper off in 6 months time 😂 I tried the method in the manual first but couldn't get at it, my arms and hands look like I've been attacked by a tiger 🙄 changednthe clutch and flywheel 2 weeks ago... €1500 parts and labour. So screw that, got both myself brand new online for €550. Then €250 to my mechanic. 4 days without the car.
4 days without but saved 800 quid and saved yourself from looking like a tiger attacked you again! Lol. I always get people to do the hard jobs, its less cost and saves time so you can do whatever. The rich man isn't the mechanic its the bloke that owns the garage.
Why change the bulbs ? Surly not because they are a bit brighter? Why , no point!! Unless your doing a night rally or want to blind other drivers 😙. Don’t waste your money 👍
I see your point but no really, they are a lot brighter and clearer on dark roads, i live on darker roads so its a safety matter plus the colour is a lot nicer then the warm glow of the halogen ones, like using a candle to see where im driving.
As much as I love my accord, I hate to change H1 bulb. It's pretty fuckin ridiculous (excuse my language) Can somebody tell me why Honda done such a stupid thing? I honestly hate this...btw thanks for nice video. Greetings from Switzerland...
I know it's so ridiculous, i think honda just want people to return to honda to get light bulbs changed. But I'm kinda used to doing it now.