I never looked at the rotations that close. Sounds fundamental but I think no one is paying enough attention(Maybe the riggers are) about this. It's really a good subject. Thanks.
Awesome series,very useful for me,I think it is a very important issue in c4d.really hard to find enough tutorial about it,I think it is a very valuable series, thank you very much for sharing.Have a nice weekend.
@ShepperdOneill I know it has been a few years on this - thank you for the information! If I wanted to instance the whole assembly and have it follow the same target, would that be possible? Say a plane flying overhead and both turrets follow it's motion, but one is an instance of the original (or even a cloner with a lot of them)?
Hey Sheppard, Just wanted to let you know, at 8:00 you're not using the native constraint as intended, you need to select the constraint tag, then select the Basic tab, check on "Up", this will create a new tab called "Up-Vector", this is where you need to put your "Up" null.
Hi Shepperd, Awesome tutorials. Your explanations are very clear and to the point. Everything works fine in R21 with the same (buggy/odd) behavior as you demonstrated for the native tools. Doesn't look like anything has been changed. However, in both R20 and R21 all of Cactus Dan's tools are in one long list. They do not follow the sub-folder structure of the plugin and as it shows in your videos, which makes it hard to visually scan and apply. Any idea how to make the nested folder structure show up properly? Thanks!
Hi Judah! I was not able to get the CD Tools to work in R21. Did you do anything special to get them to work? If I can get them to work with R21 on my end, I'll see if I can find a solution to your problem. As of right now, I can only get them to work with R18.
Hi Shepperd. I just copied them into the folder that links from the Edit > Preferences... dialogue at the bottom. c:/Users/**username*/AppData/Roaming/Maxon/**C4D Installation**/plugins. They won’t show up in the Program Files directory under plug-ins. And I placed the 2 INSYDIUM bridge files into the root level of the “CD Tools” folder. While I was writing this I decided to try an experiment and so I took the INSYDIUM files and copied them into each of the sub folders and moved those all up to the root level. That works for the most part, however not all the folders show up in Cinema. So I’m thinking that only some of the tools work in R20 and R21. I’ll keep you updated as I work through your tutorials. :)
Hi Judah. Thanks for letting me know. I also have tried to use the Insydium bridge files, but I was not able to get them to work. I tried both locations, (plugins folder in the "Program Files", and also the plugins folder in the "preferences" like you listed). Currently running R21.115.
@@ShepperdOneill So many variables to keep track of. Here are some screenshots of R20 and R21. Latest versions of both. www.dropbox.com/s/vtd7zxswainpipo/Screencap_Extensions_R21.jpg?dl=0 www.dropbox.com/s/l129h06p75yryjn/Screencap_Plugins_R20.jpg?dl=0
@@ShepperdOneill Yes I also have 21.115 (Using subscription model) and I was not able to get the plugin to work either despite trying all the fixes mentioned. Hopefully the rest of the series, we won't need the plugin (will continue to try to get it to work...) Amazing tutorials by the way.
Good tutorial, thank you. But I dont'get the reason why is default axis on the housing object is wrong (12:40)? And why do we need to rotate him twice this way ?
Hi I love this series!!! THANKS A LOT FOR THIS! I am looking for a tutorial on how to create an zipper... are you able to make that too or do you maybe know any good tut?
I have been beating my head against a wall trying to install the CD Tools and Bridge into C4Dr21. I've tried everything and I cannot get r21 to recogonize these plug ins. PLEASE HELP.
Not sure if you've been able to solve this by now, but I was just able to install the CD tools in R21, here's what I did - Make a new folder within your C4D plugins folder with the two bridge files from insydium. You can then simply drop the CD plugin folders into the new folder and C4D should recognize them in R21.
hey brother can i send you my riging problem video ,,,,please solve that when i main object rotate ,like head ,,,,,that rotation effects to the eyes or thier rotation,,,, i also try make eyes or eyebrows children of head object,,,but its still effecting my controllers like eyes rotation sliders or other controllers.....please help soon
I wanna say thank you man U are sharing the true knowledge. Is there a way I can learn more from u. I would like to pay. like patreaon or something Pleaase let me know.
@@ShepperdOneill Your connection is not private Attackers might be trying to steal your information from insydium.ltd (for example, passwords, messages, or credit cards). Learn more NET::ERR_CERT_AUTHORITY_INVALID Help improve Safe Browsing by sending some system information and page content to Google. Privacy policy
@@BOSSdesigns That sounds like a problem on your end. Your clock might be out of sync, or it could be another issue. If you're not able to solve it, here is the direct download link... insydium.ltd/site/assets/files/downloads/CD_Tools.zip
I never looked at the rotations that close. Sounds fundamental but I think no one is paying enough attention(Maybe the riggers are) about this. It's really a good subject. Thanks.
Thank you, Dan and his family for the free plug ins and you for the great tutorial! Very sad Dan passed away so young.
Awesome series,very useful for me,I think it is a very important issue in c4d.really hard to find enough tutorial about it,I think it is a very valuable series, thank you very much for sharing.Have a nice weekend.
Thank you, and you're welcome! More will be coming soon!
Great tutorial! Thank you so much!
(Can't believe it's been 7 years since you sub-D modeling series...Those are extremely helpful too!)
You're very welcome! Time goes by so fast! lol
Wow! I think this channel is one member of the "undiscovereds club" in youtube.
Welldone Shepperd.
Thank you!
Much respect to Cactus Dan 🌵
Rest In Peace!
@ShepperdOneill I know it has been a few years on this - thank you for the information! If I wanted to instance the whole assembly and have it follow the same target, would that be possible? Say a plane flying overhead and both turrets follow it's motion, but one is an instance of the original (or even a cloner with a lot of them)?
Awesome tutorial. It definetely helps to understand everything with the axis systems...!!
Thanks so much! Your tutorials are great!
Thank you for including Cactus Dan plugins!
Hey Sheppard, Just wanted to let you know, at 8:00 you're not using the native constraint as intended, you need to select the constraint tag, then select the Basic tab, check on "Up", this will create a new tab called "Up-Vector", this is where you need to put your "Up" null.
Yes, you are correct! I was thinking that maybe by shift-selecting (as I did with the CD plugin) it would automatically include the up vector.
...Cactus Dan RIP...
This is wonderful! Thanks!
Finally thank you so much
Welcome!
Befor i watch this.. ..do the CD tools work in R22 and so on...?
@@simontrickfilmer CD-Tools currently only works for R14 - R20. It does not work for R21. I'm hoping that Insydium will update it.
@@ShepperdOneill did you write them? Make some (litte) pressure :-) They need to know, we need it
@@ShepperdOneill CD works now in R21. Did not test it a lot, but it get's loaded
Hi Shepperd,
Awesome tutorials. Your explanations are very clear and to the point. Everything works fine in R21 with the same (buggy/odd) behavior as you demonstrated for the native tools. Doesn't look like anything has been changed. However, in both R20 and R21 all of Cactus Dan's tools are in one long list. They do not follow the sub-folder structure of the plugin and as it shows in your videos, which makes it hard to visually scan and apply. Any idea how to make the nested folder structure show up properly?
Thanks!
Hi Judah! I was not able to get the CD Tools to work in R21. Did you do anything special to get them to work? If I can get them to work with R21 on my end, I'll see if I can find a solution to your problem. As of right now, I can only get them to work with R18.
Hi Shepperd. I just copied them into the folder that links from the Edit > Preferences... dialogue at the bottom. c:/Users/**username*/AppData/Roaming/Maxon/**C4D Installation**/plugins. They won’t show up in the Program Files directory under plug-ins. And I placed the 2 INSYDIUM bridge files into the root level of the “CD Tools” folder. While I was writing this I decided to try an experiment and so I took the INSYDIUM files and copied them into each of the sub folders and moved those all up to the root level. That works for the most part, however not all the folders show up in Cinema. So I’m thinking that only some of the tools work in R20 and R21. I’ll keep you updated as I work through your tutorials. :)
Hi Judah. Thanks for letting me know. I also have tried to use the Insydium bridge files, but I was not able to get them to work. I tried both locations, (plugins folder in the "Program Files", and also the plugins folder in the "preferences" like you listed). Currently running R21.115.
@@ShepperdOneill So many variables to keep track of. Here are some screenshots of R20 and R21. Latest versions of both.
www.dropbox.com/s/vtd7zxswainpipo/Screencap_Extensions_R21.jpg?dl=0
www.dropbox.com/s/l129h06p75yryjn/Screencap_Plugins_R20.jpg?dl=0
@@ShepperdOneill Yes I also have 21.115 (Using subscription model) and I was not able to get the plugin to work either despite trying all the fixes mentioned. Hopefully the rest of the series, we won't need the plugin (will continue to try to get it to work...) Amazing tutorials by the way.
Good tutorial, thank you. But I dont'get the reason why is default axis on the housing object is wrong (12:40)? And why do we need to rotate him twice this way ?
The axis of the housing needed to be rotated so that it would spin around its Z axis.
Hi I love this series!!! THANKS A LOT FOR THIS! I am looking for a tutorial on how to create an zipper... are you able to make that too or do you maybe know any good tut?
Thanks for the tute. I'm ssing CD Tools in R20 and they work better than C4D contraints (redraw issue). Hope CD Tools will be updated to R21...
how do you install it ? loaded it in plugins but it doesnt show up
@@jonimaginations Insydium Bridge plugin to work on r20. Not sure if it works on the latest Cinema4d releases though
I have been beating my head against a wall trying to install the CD Tools and Bridge into C4Dr21. I've tried everything and I cannot get r21 to recogonize these plug ins. PLEASE HELP.
Not sure if you've been able to solve this by now, but I was just able to install the CD tools in R21, here's what I did - Make a new folder within your C4D plugins folder with the two bridge files from insydium. You can then simply drop the CD plugin folders into the new folder and C4D should recognize them in R21.
Can u show us a rig for a tripot system? (DOF)
hey brother can i send you my riging problem video ,,,,please solve that when i main object rotate ,like head ,,,,,that rotation effects to the eyes or thier rotation,,,, i also try make eyes or eyebrows children of head object,,,but its still effecting my controllers like eyes rotation sliders or other controllers.....please help soon
The eyes should be a child of the head object so that they rotate when the head is moved.
I wanna say thank you man U are sharing the true knowledge. Is there a way I can learn more from u. I would like to pay. like patreaon or something Pleaase let me know.
You're very welcome! Right now I do not have a Patreon. I only have UA-cam where I make tutorials.
Cactus Dan's plug ins don't work with R21
They do, but you need the Bridge plugin from Insydium to make them work.
the site not open ( privacy error )
I just tried it and it works for me.
@@ShepperdOneill Your connection is not private
Attackers might be trying to steal your information from insydium.ltd (for example, passwords, messages, or credit cards). Learn more
NET::ERR_CERT_AUTHORITY_INVALID
Help improve Safe Browsing by sending some system information and page content to Google. Privacy policy
@@BOSSdesigns That sounds like a problem on your end. Your clock might be out of sync, or it could be another issue. If you're not able to solve it, here is the direct download link... insydium.ltd/site/assets/files/downloads/CD_Tools.zip
Not working
They do, but you need the Bridge plugin from Insydium to make them work.
Unfortunately, we can't download and use CD Tools anymore, what a waste of great tutorials....