Do you still get long pauses as it streams in new tiles. I found this impossible to deal with as I fly online in Vatsim. The long pauses would result in me being disconnected from the network.
@@wycliffeb Hi thanks for your comment, I haven’t noticed any long pauses when flying, I guess it depends on the speed of your broadband connection. I’m getting 50+ Mb/s download. Thanks for watching 😎✈️
@@wycliffeb That’s a great speed so must be something else, I don’t do much flying online now! What version are you using? V0.7.1 should give better download speed of the tiles.
@@RBEmerson SAM is a plugin for Scenery Animation and enhancements. If you haven’t got it then don’t worry. Look closely at the order of the Scenery_packs.ini file. If you still need help then join my Discord and I will try to help you there.
I just installed the latest 7.2, and it looks good and works but I have a rendering issue where it doesn’t fully render with distance. Only in the area where my plane is, but if you look at mountains for away they are default green (unless I zoom into them). Anyone else have this issue or know a fix?
@@FlySim24 Thanks for the quick reply, and great video btw! I tried messing with the rendering settings, and even on the maximum distance it still does the same thing, kinda weird :/
Thanks for your videos, running xp12 without any other stuff but auto ortho, asian airports like in malaysia and vietnam has trees on runways and ramps how to fix this thanks!
@@FlySim24 Sure one was WBGG start of rwy 25, wbkk rwy 02 and the other one was in dananag in vietnam most of the ramp was cover with trees, how do you disable the overlay say just for Asia if i decide to fly there? so far usa, and europe haven't found this issues cheers!
To disable the Overlay, replace the overlay line in Scenery_packs.ini file with this, (you can use Notepad) SCENERY_PACK_DISABLED Custom Scenery/yAutoOrtho_Overlays/ If you are not sure how to do this come on my Discord and send me the file and I will edit it and sent it back to you.
My issue is that I use both XP11 and XP12, so it's impossible for AO to work in both as it uses same config file and cache directory. I get a lot of pixelated and blurred tiles when was trying AO in XP12, and also in XP11 with any version above v4.4. Now using only v4.4 in XP11, works perfectly. Not sure is the same cache directory the only culprit, I really don't have the time to investigate.
This is something that I have been thinking about doing so I will investigate and then share my findings in a video. I’m sure it’s possible with AO v0.7.1 ✈️😎
@@FlySim24 Interesting. I've tested 0.7.1 and it was injecting blurry and pixelated tiles all over in both XP11 and XP12, so I reverted back to 0.4.4, and using it only in XP11.
XP11 user, I get no building from the default scenery. Is that mean I have to use simheaven or other to make my building come back? I got the airport but nos cities.
It sounds like a problem with the order of airports, libraries and authos in the scenery_packs.ini file. Check my video and see the order of my file. Hope this helps ✈️😎
@@FlySim24 I highly recommend you buy the xorganizer that on version 330 supports autoortho natively. Using the Simhaven packages is also a great option to populate the scenery with buildings, houses, etc
When I try to download north america, the download speed is around 1mbps, and the north america scenery is downloaded, however I haven't downloaded Africa, Oceania, etc. Is that why it is slow??
Downloading scenery files can be tricky as it depends on how busy the server is. Try at different times and it doesn’t matter what order you have downloaded them, you can get just the area that you want to fly and leave the rest.
@@FlySim24 Thank you! I downloaded it with no problems! However when I open X-Plane and try to spawn, I get this error message.... user-images.githubusercontent.com/130621536/278785939-9742ed45-7304-41cf-bfac-db7da03b92a1.png If you know how to fix can you please tell me (if possible)? Thank you.
Hi, if you use v0.7.1 you can setup for the sceneries to download to a common disk drive that will be used by both, but you need to do the installation separately for XP11 and XP12 (2 different folders) to run it. Hope this helps ✈️😎
do you know how many files there are? i have tried installing it on numerous occasions but everytime it gets to the 15th file it just says "DONE downloading EU autortho 15" < whatever it says with 15, this has lead me to believe there are 15 but when i launch up Autoortho it just says "COULDNT LOAD AUTOORTHO NOT FULLY INSTALLED"
Hi, there are 15 files but when downloaded it then needs to process the files and that take a long time. If you see “Done” at the bottom of the main screen then that’s when it has finished installing ✈️😎
Click to Subscribe…
www.youtube.com/@flysim24?sub_confirmation=1
Do you still get long pauses as it streams in new tiles. I found this impossible to deal with as I fly online in Vatsim. The long pauses would result in me being disconnected from the network.
@@wycliffeb Hi thanks for your comment, I haven’t noticed any long pauses when flying, I guess it depends on the speed of your broadband connection. I’m getting 50+ Mb/s download. Thanks for watching 😎✈️
@FlySim24 I have a 250mbps connection. So no issues there. Do you fly online.
@@wycliffeb That’s a great speed so must be something else, I don’t do much flying online now!
What version are you using? V0.7.1 should give better download speed of the tiles.
As usual way to far advanced for my 88 yr old mind. Thanks
Thanks for watching, but you’re never be too old to enjoy a good flight 😂✈️😎
Thanks very much for this. Helpful video!
You’re welcome, I’m pleased you found it helpful 😍✈️😎
Wow nice tips 👀👍
Thank you 😊✈️😎
For SAM, you have to select manual in the setting of the pugin.
Good tip, thanks 😍✈️😎
Er, what /is/ SAM?
@@RBEmerson SAM is a plugin for Scenery Animation and enhancements. If you haven’t got it then don’t worry. Look closely at the order of the Scenery_packs.ini file. If you still need help then join my Discord and I will try to help you there.
Changing from Doken to WinFSP resolved the error messages when starting XPlane 12 for me (and I have the Steam version of XPlane)
I’m pleased to hear that, thanks for the feedback ✈️😎
I just installed the latest 7.2, and it looks good and works but I have a rendering issue where it doesn’t fully render with distance. Only in the area where my plane is, but if you look at mountains for away they are default green (unless I zoom into them). Anyone else have this issue or know a fix?
Hi, what is your Rendering Distance set to in Graphics settings? You may need to increase it.
Thanks for watching 😍✈️😎
@@FlySim24 Thanks for the quick reply, and great video btw! I tried messing with the rendering settings, and even on the maximum distance it still does the same thing, kinda weird :/
Thanks for your videos, running xp12 without any other stuff but auto ortho, asian airports like in malaysia and vietnam has trees on runways and ramps how to fix this thanks!
Thanks for watching, you could try disabling the AutoOrtho overlay, otherwise let me know what airports and I will check it out 😍✈️😎
@@FlySim24 Sure one was WBGG start of rwy 25, wbkk rwy 02 and the other one was in dananag in vietnam most of the ramp was cover with trees, how do you disable the overlay say just for Asia if i decide to fly there? so far usa, and europe haven't found this issues cheers!
@@wakotropolis Hi, thanks for sending these, I’ll check them and get back to you soon.
To disable the Overlay, replace the overlay line in Scenery_packs.ini file with this, (you can use Notepad)
SCENERY_PACK_DISABLED Custom Scenery/yAutoOrtho_Overlays/
If you are not sure how to do this come on my Discord and send me the file and I will edit it and sent it back to you.
Hi! I got some issues with the airport buildings not showing up...
My issue is that I use both XP11 and XP12, so it's impossible for AO to work in both as it uses same config file and cache directory. I get a lot of pixelated and blurred tiles when was trying AO in XP12, and also in XP11 with any version above v4.4. Now using only v4.4 in XP11, works perfectly. Not sure is the same cache directory the only culprit, I really don't have the time to investigate.
This is something that I have been thinking about doing so I will investigate and then share my findings in a video. I’m sure it’s possible with AO v0.7.1 ✈️😎
@@FlySim24 Interesting. I've tested 0.7.1 and it was injecting blurry and pixelated tiles all over in both XP11 and XP12, so I reverted back to 0.4.4, and using it only in XP11.
XP11 user, I get no building from the default scenery. Is that mean I have to use simheaven or other to make my building come back? I got the airport but nos cities.
It sounds like a problem with the order of airports, libraries and authos in the scenery_packs.ini file. Check my video and see the order of my file. Hope this helps ✈️😎
@FlySim24 i'm also on v7 and xplane 12. the only problem i expected is that on the ground the buildings are gone.
Missing buildings, that could be a problem with your scenery_packs.ini file. Check the order and compare it with mine in the video ✈️😎
@@FlySim24 I highly recommend you buy the xorganizer that on version 330 supports autoortho natively. Using the Simhaven packages is also a great option to populate the scenery with buildings, houses, etc
I completely agree with you ✈️😎
To complicated I deleated orto for xplane if the custom scenery dosent have orthos then forget it to much headache
I find the latest version to be much easier to setup and use, I’m on v0.7.2 and it’s very stable ✈️😎
Hey, I recently got auto ortho 7.2.0 and my auto ortho in airports is 2d, is the any way of making it 3D?
Hi, check the listing in your scenery_packs.ini file. Also make sure you have the correct libraries installed ✈️😎
hi does hdmesh work with auto ortho? im on x plane 11 so im not sure if I should use hdmesh along with AO
Hi, yes hdmesh works fine with AutoOrtho. Thanks for watching ✈️😎
When I try to download north america, the download speed is around 1mbps, and the north america scenery is downloaded, however I haven't downloaded Africa, Oceania, etc. Is that why it is slow??
Downloading scenery files can be tricky as it depends on how busy the server is. Try at different times and it doesn’t matter what order you have downloaded them, you can get just the area that you want to fly and leave the rest.
@@FlySim24 Thank you! I downloaded it with no problems! However when I open X-Plane and try to spawn, I get this error message.... user-images.githubusercontent.com/130621536/278785939-9742ed45-7304-41cf-bfac-db7da03b92a1.png If you know how to fix can you please tell me (if possible)? Thank you.
Try starting at a different airport, make sure you’re connected to the internet. You can join my discord if you need more help.
@@FlySim24 Ok thank you for helping me
i have auto ortho installed for xplane 11 but i wanna use it for xplane 12 aswell but cant find a way to
Hi, if you use v0.7.1 you can setup for the sceneries to download to a common disk drive that will be used by both, but you need to do the installation separately for XP11 and XP12 (2 different folders) to run it.
Hope this helps ✈️😎
@@FlySim24 maybe you can make a tutorial because i already have version 6 downloaded
@@flywithkrish Sounds like a good idea, I’ll see what I can do ✈️😎
do you know how many files there are? i have tried installing it on numerous occasions but everytime it gets to the 15th file it just says "DONE downloading EU autortho 15" < whatever it says with 15, this has lead me to believe there are 15 but when i launch up Autoortho it just says "COULDNT LOAD AUTOORTHO NOT FULLY INSTALLED"
Hi, there are 15 files but when downloaded it then needs to process the files and that take a long time. If you see “Done” at the bottom of the main screen then that’s when it has finished installing ✈️😎
AutoOrtho is causing very much stuttering for me. Im on a older Version is that fixed on new versions?
Hi, v0.7.1 is much better but you will need to do a fresh install if you’re on v.4 ✈️😎
Do i have to configure the ini every time i run auto ortho?
Hi, no need to configure every time as long as you start AutoOrtho before starting X-Plane!
@@FlySim24 thanks 🙏
Is it a freeware ?
Hi, yes AutoOrtho is freeware, download links are in the description of the video 😍✈️😎
For me autoortho destroy the airports. Missing buildings. I have x-organizer and the ini it's ok
That’s strange, can you send me your secenery_packs.ini file and I’ll have a look at it. Join my Discord and I’ll try to help.
@@FlySim24 the problem was SAM3. Thanks !
@@joseperezgarcia1819 Great to hear it’s now working ✈😎
This was the weirdest robo-voice I've heard in a UA-cam video.
Thanks for your comments!
Robo voice.
Yes I know! Thanks for watching ✈️😎
Sam still an issue
Yes for me it is but some people are happy with SAM. I guess it’s ok if you don’t have many plugins ✈️😎
put manual in the setting of sam for the ortho