VEVOR TOOLS 3600psi 2.6gpm pressure washer unboxing, assembly and review
Вставка
- Опубліковано 4 лют 2025
- lets look at this non sponsored review on this vevor 3600psi pressure washer
@vevor.official
s.vevor.com/bf...
#vevor #pressurewashing #vevordiyproject
Product link
s.vevor.com/bfRxDm
Thanks for the review. I literally was going to order it until I told myself to head to UA-cam University. You gave me all the info I needed. Ordering it right now.
I’m glad I was able to be of assistance
Mine came in the mail today and works great. Thanks for the video and for telling how much oil it needs (18 oz)
Glad I was able to help
Thinking about ordering the 3400psi unit, for the simple reason it's ~$120 less than the 3200 psi unit that I was going to buy from Harbor Freight.
I saw your video and ordered the washer. The instructions that came with my unit said I also needed to add ND oil to the water pump and to fill it half way on the sight glass. Guess what - no sight glass!! There's another brass fitting on the end of the pump and I'm guessing that is how you determine oil quantity?
Hey Kyle, thanks for reminding me i have to pressure wash the siding, lol.
I have a number of Vevor products like an 18.5 ft, telescoping ladder which is super sturdy even with my 280lb frame on it. A Vevor range hood over the kitchen stove, a couple of Vevor heat presses, and a Vevor vinyl cutter for making custom shirts, hats and hoodies. I also just got the Vevor 3400psi pressure washer and assembled it today. I have yet to use the pressure washer, but I can say everything I've bought from Vevor works really well and the prices can't be beat. I intend to use the pressure washer on my house and walkways tomorrow. I'll get back to you guys and let you know how it goes.
Really waiting for your comment, because I'm going to buy this machine for professional use, but I'm worried that might be a less powerful model will be enough for me.
@@YefimovNikita , I pressure washed my house, driveways and walkways today and the Vevor 3400psi did a wonderful job. I would say it is close to bare minimum for what you would need to do professional jobs. No lower than 3200psi for pro jobs. I personally would get the Vevor 3600psi for $15 more if I were using the machine for professional jobs but the 3400psi would get the job done as well. Excellent machine imo.
@@redwolfacutinaantam7725 Thank you very much for the reply. I am planning to buy a 4400 PSI 4.0 GPM , it seems to me that anything below that capacity will not be enough or I will just be running it for a very long time.
Unfortunately that model was out of my budget. I do have to say I am impressed with the 3600psi.
@@YefimovNikita , be careful with a washer that powerful especially if you do houses. 4400psi can strip the wood off of houses and the paint off of siding as well as cars. Hopefully you are a pro and know exactly how to use it if using a machine that strong. Good luck with your endeavors, friend!
It lasted more than 5 min with kgm thats a good test right there seems like a solid unit for small jobs
Nice video bro 👍🏼 VeVor has some cool products 🤙🏼
Seems like a pretty solid little unit Kyle!
Hi, good video, but does the pump really have 3600lbs of pressure because on the video it doesn't seem to have it, it looks more like 1800lbs or so.
@@jeanpicard-u6j I am not sure. I did say in the video I do not have a pressure gauge to test actually output pressure. I do feel it had more than 1800psi
Hello.do u kno what type pump it go with
@@millerboymiller4316 I’m not sure I understand. Are you looking for a replacement pump?
Thanks! Just got mine
🎉 !! Definitely good information.. we all want a good deal !
Should water be coming out the right side of the pump when the sprayer is idle
I am not sure the answer to that exactly. If your leaking though the body of the pump, no. But if it is a fitting it may need to be tightened
@@kgm5512 It might be a relief valve. Adding an uploader valve as well as a pressure gauge was recommended by a buyer.
Still like it ?
yes i do
What size quick connects did you switch over to...
@@MrDre_Black325 I have not had an opportunity to switch them yet. There a a few different options on Amazon that adapt to the factory connections. I will update you when I get around to changing them! Thanks for watching
@kgm5512 just got mine today. And decided to for the first tome make an unboxing video. And everything was going smoothly. Even gave you a shoot out...lol. and I poured the gas in the tank and it all leaked out the bottom of the power washer....
Update on power washer. So what caused the gas to come out after I poured it into the tank. Was the way they routed the fuel line from the tank to the carburetor. The fuel line is to close to the part that spins when you pull the cord to start the machine. So when the motor is spinning it rubs against the fuel line hose creating a hole in the fuel line. So I just rerouted the fuel line to keep any moving part for rubbing against it.
And after going back and forwards with vevor for a couple of days. Once I mentioned that I made an unboxing video of everything along with the poor Q.C. they offered me a partial refund which more than paid for the couple of dollars it cost me to buy like 2ft of fuel line. And I've been power washing everything in sight. Hope this helps anyone who may have had the same problem I did.
@@MrDre_Black325 thank you for the update. Glad you got it all sorted out
Does it just engine oil?? Or do u also have to add petrol
Hello. The machine is shipped WITH OUT engine oil and WITH OUT gasoline. You will need to ADD both prior to use.
Mine starts up and bounces all over the driveway like it has frog legs! What am i doing wrong or missing?
Sounds like maybe the choke is on.
@kgm5512 it came out of it but it doesn't have any water pressure when I pull the wand trigger .....then I took the u loader valve out and put it back in then it worked until I left off the trigger then it spiked to over 4000psi and stalled itself out....then restarted it and it's back to no presure
@@kgm5512 unloader valve manifold was junk from the factory...they refused to replace it or fix it....they ended up refunding me after going back and forth through email and telling me to keep the machine and do w.e I want with it they didn't want it back. So I bought a new pump and manifold for 55 and it works like a charm.
You don't show where to connect the hose😢
I do apologize, this was my first video like this.
There is a recent comment under the Q&A from June 14th, 2024. Vevor answered, saying it requires 100ml of oil
100ml is roughly 3 oz. That is not nearly enough oil and will not even touch the dip stick
Oil for the pump, though. Not the engine.
@@DragonLinkBestDeck oh 🤦♂️🤦♂️thank you!!
No worries. After reading my initial comment, I can see how you got confused. I did not mention oil for pump, just oil... everything has oil lol
@@kgm5512I've seen 7 different answers from vevor on the same product thread lol
Thanks! The instructions were a bit sparse
@@RaiserRamon I’m glad I was able to help!
I'm not a fan that the hose has two different fittings instead of the same for both the wand and pressure washer. The detail in which these Chinese manufactures fool the consumer most is their numbers. Gotta test to see if it's truly 3600 psi!
I agree with you on the hose. I wish I had a way to test the actual psi and gpm but unfortunately I do not.