Rose Anvil x White's Drifter 3.0 drops Oct 17, get early access to the release by getting on the Limited Edition email list here - bit.ly/3BDRgei Grab a Rose Anvil Slim Neck Strap for your camera gear needs here - bit.ly/3Nek3c9
Can you cut in half the new koio capri they changed a few things and I’m curious also the To boot newyork minimalist sneaker would be cool to see too please and thank you
Work boot recommendation for a winery worker I'm usually washing tanks & regularly stepping in 2 inches of hot caustic water & chlorine water every day Is there any boot besides a pure rubber boot can is built to last such work conditions
I've been wearing these boots for two years, including almost daily in the winter. They've worked really well. They keep my feet dry and the rubber grips well on snow and ice. Good job Red Wing.
I have had eight pairs of Red Wings, and these are good boots for being waterproof and comfortable. My only issue with these boots is that water stains have developed, which I have never had on any other RWs
I would not wear them on the pavement because that's what I did, and I wore the soles flat in about a month and a half. The thorogood soles are a lot tougher and they actually have a shank, these however use leather insoles I guess you could call them as compared to fiberboard with the thorogoods.
Before watching this video, a word about Gore Tex and all of those "Breathable" fabrics in general. Gore Tex is EITHER waterproof OR it's breathable. It is physically impossible for it to breathe when it's wet. Once it's wet on the outside, it cannot breathe because of that moisture coating and blocking the pores. Gore Tex is such a well known name brand, they charge a large hit, sometimes 15% of the selling price of a garment as Gore Tex commission for the label. Testers on UA-cam have tested multiple brands of the membranes, and Gore Tex came out mid-field compared to other membranes on sports products and clothing. Best in the world currently is made by Alpinestars out of Italy, for their motorcycle apparel lines.
I’ve actually watched gore-Tex being produced and you are correct. It should be marketed as “extremely water RESISTANT”. I personally wear gore-Tex lined boots however. But some work is involved. Gore is a 5-7 mil poly film produced in 5-6’ wide sheets and stored in reel “roll” form. As it goes down the mil test line, it gets perforated. When formed into a bootie the perforations point outwards away from the body, like tiny volcanoes on the outside of the fabric. This allows moisture to be pulled from the feet, while limiting moisture to enter into the tip of the volcanoes. But, after an amount of time being saturated , it will hit a pressure state where sweat out and moisture in hit an even pressure and moisture enters. To solve this issue, wear boots that have a thick, durable leather exterior and treat that leather with sno-seal. It’s bees wax seals the outer leather itself (while having an open grain on the inside allowing the gore to “breathe” , while rolling water off the leather, never allowing the leather to absorb moisture and get to the point of saturation which is when the gore will reach that osmotic pressure point. And it keeps the exterior leather flexible and pliable which increases the durability and overall lifespan of the leather. Gore lost its patent years ago and that’s why we see so many “knock off” products such as “chippatex” being introduced. Yes, it is the same exact product as gore. But no, it doesn’t get the attentive qc that gore demands in its contracts, and no, the companies using it do not have to turn in product for gore qc secondary testing and approval. So, gore themselves turn in a better product overall. And, if used in conjunction with a well made/well owner treated outer leather, and good socks that absorb moisture themselves before testing the limits of osmotic pressures between the gore and saturated leather, for 99% of its life will be basically “waterproof” in many users terms. Such as sitting in a tree stand in constant heavy rain. Or snow, or the real test….mud and melting frost earth in spring, where your feet are on a literal “sponge” and the pressure of your own weight causes puddling around your feet. In most of the situations, your other clothing will fail before a well treated pair of actual gore-Tex lined boots. But again, you are correct. Only material that is truly water proof is rubber. Which holds in sweat and water just as good as it holds it out. That’s the only way a person will experience true water proof. And that experience sucks as your feet will be saturated with sweat and eventually get cold in the weather.
Ive seen over 40 vids throughout the years and every time he cuts the shoe in half, is like a TF2 unboxing crate moment of "will this shoe make us proud or disaapoint???"
I’ve worn these boots to work 6 days a week since 1914. I’m primarily working overhead stringing telegraph lines. I haven’t so much as broken a lace, even in the great ice storm of ‘36. These boots served me well during two tours liberating France. Every morning after a hearty breakfast at 5 am, i polish ‘em up with your momma’s bacon grease and walk to work rain or shine.
LOVE THESE! I bought these direct from the Red Wing warehouse sale last October at HALF PRICE and love them. I was worried about the lining coming loose vs the original plain leather moc toes, but they’ll been bulletproof.
I’ve had these for a couple of years now. I wear them to work every day. Outside repair work, not inside office work. I use them to ride my motorcycle too. They are still waterproof. I really didn’t like the red color at first, but now they have turned a lot darker, so they look a lot better. I had them resoled last year. Only thing is, it took 3 months to get them resoled from Redwing, and the stitching was too close to the edge, and the stitching is already breaking. I didn’t say anything when I picked them up, because I need them for work, and I didn’t want to wait another 3 months.
Love the Moctober special!! Could you do a video for the Duradero Boot Company? They offer a free sole replacement with every boot so Im curious what their quality is. Love the videos and the education behind the companies. Cheers!!
Great video. I’m definitely contemplating the GORE-TEX version. Would love to see you do a 6” moc toe collab with Whites. Would be cool to see your twist on them.
I have owned these boots since they were released 2 years ago. Super comfortable and they are basically still new. Holding up super well. The leather has a red dog sorta color - perhaps fading a bit over time. Also seem to wear lighter at wear spots like red dog. I also really like the look of no stitching for the heel counter. I find that visually appealing and an interesting cue that this is a special boot.
I’ve had a pair of these for over 2 years now and they have been amazing. I’ve resoled them with Vibram Wedge sole as it’s more durable. I wear them several times a week. I have been hiking in them in really arid rocky conditions, as well as using them to cycle everyday to work! They have held up amazingly well. The inner lining is still intact, despite heavy wear. The leather is soft, but tough. Really comfortable boot and don’t need to worry about breaking them in.
I’ve had these for two years, so I’m excited you’re cutting these (even though it was painful to watch). I have thousands of dollars of higher end boots and shoots and this is in my top 3 favorite pair to wear.
Thank you for another great video. Is there any chance to cut safety moc toe boots that are available in the UK market at the moment such as Grinders and SL-Saint?
I have owned these for 2 years. I love them. They are so comfortable. The gore Tex feels like a slipper and keeps my feet dry. Plus, the color is amazing.
Absolutely!! I'm a hater in general of the Brunts but I'm super curious to see what the story is on those. My bet is they're probably going to be a "decent, just overpriced" type review.
Seems like a slab of leather over top of a thin layer of quality foam would be a good compromise, I would expect that combo to have more or less the benefits of both materials. I'm not much of a moc toe fan, but that is a REALLY attractive moc toe boot!
Has Rose Anvil ever cut in half one of their steel toe "Traction Tred Lite" moc toes? I cant find a video with one of those getting cut in half, but i would really like to see what the guts if their steel toe mocs are made of. Cheers!
I bought them at Red Wing store event near Penn Station in NYC like two weeks ago for .... $125. Believe or not, single pair of Work boots - $99, double pair - $150. Single pair of Heritage boots - $150, double pair - $250. And I wore them next day canvassing upstate NY. 16 miles in a day. I was comfortable all the way. Of course upper rim made a small sore on my foot despite long sport sock. But overall - great feeling!
I’ve been wanting to see how redwings cowboy boots compare to traditionally made cowboy boots. Specifically the nail seat or pecos. Most of the time I’m surprised how traditionally made their products are. Hope their cowboy boots are also traditionally made
I just picked up my 2nd pair of Keen Cincinnati boots (6" w/ carbon fibre toe) and highly recommend. Comfortable, keep my feet dry and durability is good. Had to replace the old ones (about two years old) when the pull loop on one finally let go.
The foam insole topping is fine. But, listen closely Red Wing, NOBODY WANTS A FIBERBOARD INSOLE FOR $369. How many of your once competitors have burned their brand to the ground by selling crap for short term profits? Do you really want to be the next?
I'm not quite sure I agree that Red Wing is trying to get more people into their more hard core boots with this model. It costs more than the hard core models! I think it's a good choice as a hunting boot given the Gore-Tex and quasi-waterproofed leather, though.
This is my daily driver and I love this shoes. Funny how I own both exact model shown for a comparison, and surprisingly, Gore-tex one is more comfortable. And I actually hiked with it multiple times in Colorado and it was pleasing to walk with. They are durable, and leather is surprisingly really good quality.
The Blood Core Kilties look awesome and I want them. I don't have boots they would work for unfortunately. Looking forward to more stuff made out of the blood leather project.
Great video!! I know it is moctober, however, Nike has made a couple of air Jordan’s that have collaborated with A Ma Maniere. They have been marketed and believed to be the best of the best of the air Jordan’s. I’ve got a pair of air Jordan 4 A Ma’s and they are made of some sort of suede. But on the inside they seem to have a genuine leather lining to the TOE. And the suede on them looks extremely hairy, but the grain pattern is very hard to find by me. They seem to be premium. I feel like we need to know if these A Ma shoes are really that premium and really worth that premium price.
Well let's hope they keep it up because whatever has Gore-Tech on it. That's what I want the Jordan ones. Those are real with the Gore-Tex label. The Air Max 90s That's a real shoe made from defense material
Even with the poron, it's still super firm underfoot. It's too thin. If you value underfoot cushion in boots that feel like running shoes, they're hard to find.
Found a pair of the 8 inch red wing mock toes at a thrift store for 8.50. Snapped them up right away! My size too. I’m hoping in a few years to get them resoled, and possibly new footbed so I can break them in myself this time.
Gore-Tex is the best. I have some Jordan 1 Gore-Tex and those Jordans are made the best they feel real like what nike used to be? Before they started using plastic
It’s been known since it came out what the 8864 was built with internally. There is no secret. I have had a pair since it mace out and I wear it in rain and snow. It being pretty good.
The wing shooter is a great boot! Love the soles on those! Overall a better boot but foreign made, I wish they’d just make the wing shooter in the USA!
If the leather is waterproof why do they need a goretex lining? I'm sure the goretex lining will degrade after several months and stop working just like every other goretex boot I've owned. At least you'll be able to wax the leather up to help keep your feet dry on these boots though.
Be careful, these ARE true to size. I heard order a size down? Mistake for sure. The Iron Rangers are opposite, and run big. So if you have size 10 get a 9.
You ever see the Cabela's boots? Around 100 bucks. I got some for free working for a park and actually worked in em today and it wasn't bad. I noticed reviews saying they've been the same for 30 years. They look like logger Timbs with a kiltie haha.
My red wing is an Irish setter and I only wear them during the winter as they are very warm. They may have the same lining as those but are a different model. Mine are not moc toe mine are the logger style.
Can you do the Rocky Outback Gore-Tex Hiker? I think it's a pretty good budget option for boot that won't be worn everyday. They're at least made in the Dominican Republic rather than China, and the cup soles are side stitched all the way around.
Rose Anvil x White's Drifter 3.0 drops Oct 17, get early access to the release by getting on the Limited Edition email list here - bit.ly/3BDRgei
Grab a Rose Anvil Slim Neck Strap for your camera gear needs here - bit.ly/3Nek3c9
I was just about to ask about these perfect timing
Can you cut in half the new koio capri they changed a few things and I’m curious also the To boot newyork minimalist sneaker would be cool to see too please and thank you
Work boot recommendation for a winery worker
I'm usually washing tanks & regularly stepping in 2 inches of hot caustic water & chlorine water every day
Is there any boot besides a pure rubber boot can is built to last such work conditions
*_400 bucks for cork and generic wedge toe soul... AHHH NO!!!_*
I've been wearing these boots for two years, including almost daily in the winter. They've worked really well. They keep my feet dry and the rubber grips well on snow and ice. Good job Red Wing.
You got softt hand brother
@@m.landberht9374I like soft hands.
I have had eight pairs of Red Wings, and these are good boots for being waterproof and comfortable. My only issue with these boots is that water stains have developed, which I have never had on any other RWs
I would not wear them on the pavement because that's what I did, and I wore the soles flat in about a month and a half. The thorogood soles are a lot tougher and they actually have a shank, these however use leather insoles I guess you could call them as compared to fiberboard with the thorogoods.
Don't lie. You've been wearing converse and Jordans .
Before watching this video, a word about Gore Tex and all of those "Breathable" fabrics in general. Gore Tex is EITHER waterproof OR it's breathable.
It is physically impossible for it to breathe when it's wet. Once it's wet on the outside, it cannot breathe because of that moisture coating and blocking the pores. Gore Tex is such a well known name brand, they charge a large hit, sometimes 15% of the selling price of a garment as Gore Tex commission for the label. Testers on UA-cam have tested multiple brands of the membranes, and Gore Tex came out mid-field compared to other membranes on sports products and clothing. Best in the world currently is made by Alpinestars out of Italy, for their motorcycle apparel lines.
Where can I read/watch more about the alpine stars stuff!?
I’ve actually watched gore-Tex being produced and you are correct. It should be marketed as “extremely water RESISTANT”. I personally wear gore-Tex lined boots however. But some work is involved. Gore is a 5-7 mil poly film produced in 5-6’ wide sheets and stored in reel “roll” form. As it goes down the mil test line, it gets perforated. When formed into a bootie the perforations point outwards away from the body, like tiny volcanoes on the outside of the fabric. This allows moisture to be pulled from the feet, while limiting moisture to enter into the tip of the volcanoes. But, after an amount of time being saturated , it will hit a pressure state where sweat out and moisture in hit an even pressure and moisture enters. To solve this issue, wear boots that have a thick, durable leather exterior and treat that leather with sno-seal. It’s bees wax seals the outer leather itself (while having an open grain on the inside allowing the gore to “breathe” , while rolling water off the leather, never allowing the leather to absorb moisture and get to the point of saturation which is when the gore will reach that osmotic pressure point. And it keeps the exterior leather flexible and pliable which increases the durability and overall lifespan of the leather. Gore lost its patent years ago and that’s why we see so many “knock off” products such as “chippatex” being introduced. Yes, it is the same exact product as gore. But no, it doesn’t get the attentive qc that gore demands in its contracts, and no, the companies using it do not have to turn in product for gore qc secondary testing and approval. So, gore themselves turn in a better product overall. And, if used in conjunction with a well made/well owner treated outer leather, and good socks that absorb moisture themselves before testing the limits of osmotic pressures between the gore and saturated leather, for 99% of its life will be basically “waterproof” in many users terms. Such as sitting in a tree stand in constant heavy rain. Or snow, or the real test….mud and melting frost earth in spring, where your feet are on a literal “sponge” and the pressure of your own weight causes puddling around your feet. In most of the situations, your other clothing will fail before a well treated pair of actual gore-Tex lined boots. But again, you are correct. Only material that is truly water proof is rubber. Which holds in sweat and water just as good as it holds it out. That’s the only way a person will experience true water proof. And that experience sucks as your feet will be saturated with sweat and eventually get cold in the weather.
@@haijj Fortnine
@@jasongaudreau2075another great comment
Great comment
We need a RW Beckmans video ASAP!!!!
Ive seen over 40 vids throughout the years and every time he cuts the shoe in half, is like a TF2 unboxing crate moment of "will this shoe make us proud or disaapoint???"
I'm always worried he's going to cut off a finger or three. That would be horrible. You can't pick your nose if you don't have fingers! 😂
@@darksu6947
Dont worry about that. It woldn’t get in the video 😆
The 1907 is awesome and really comfortable once broken in, IMHO the best Moctoe Red Wing makes.
My Japan market 9877 Gold Sequioa Irish Setters might have some thoughts about that!
I’ve worn these boots to work 6 days a week since 1914. I’m primarily working overhead stringing telegraph lines. I haven’t so much as broken a lace, even in the great ice storm of ‘36. These boots served me well during two tours liberating France. Every morning after a hearty breakfast at 5 am, i polish ‘em up with your momma’s bacon grease and walk to work rain or shine.
The purists won't like this...
Wow
One of the last true Americans right here.
LOVE THESE! I bought these direct from the Red Wing warehouse sale last October at HALF PRICE and love them. I was worried about the lining coming loose vs the original plain leather moc toes, but they’ll been bulletproof.
Respecfully, be more careful on the bandsaw youre making me nervous.
I’ve had these for a couple of years now. I wear them to work every day. Outside repair work, not inside office work. I use them to ride my motorcycle too. They are still waterproof. I really didn’t like the red color at first, but now they have turned a lot darker, so they look a lot better. I had them resoled last year. Only thing is, it took 3 months to get them resoled from Redwing, and the stitching was too close to the edge, and the stitching is already breaking. I didn’t say anything when I picked them up, because I need them for work, and I didn’t want to wait another 3 months.
Love the Moctober special!! Could you do a video for the Duradero Boot Company? They offer a free sole replacement with every boot so Im curious what their quality is. Love the videos and the education behind the companies. Cheers!!
Great video. I’m definitely contemplating the GORE-TEX version. Would love to see you do a 6” moc toe collab with Whites. Would be cool to see your twist on them.
Just wondering, is it a good idea to Add leather conditioner prior of my 1st use?
Rad intro. I'm not a moc toe guy, but I enjoy Moctober vids
Keep it up, team.
I have owned these boots since they were released 2 years ago. Super comfortable and they are basically still new. Holding up super well. The leather has a red dog sorta color - perhaps fading a bit over time. Also seem to wear lighter at wear spots like red dog.
I also really like the look of no stitching for the heel counter. I find that visually appealing and an interesting cue that this is a special boot.
Irish Setters were also called red setters in the UK. Probably why they use this russet colour
I’ve had a pair of these for over 2 years now and they have been amazing. I’ve resoled them with Vibram Wedge sole as it’s more durable. I wear them several times a week. I have been hiking in them in really arid rocky conditions, as well as using them to cycle everyday to work! They have held up amazingly well. The inner lining is still intact, despite heavy wear. The leather is soft, but tough. Really comfortable boot and don’t need to worry about breaking them in.
I’ve had these for two years, so I’m excited you’re cutting these (even though it was painful to watch). I have thousands of dollars of higher end boots and shoots and this is in my top 3 favorite pair to wear.
Thank you for another great video. Is there any chance to cut safety moc toe boots that are available in the UK market at the moment such as Grinders and SL-Saint?
I have owned these for 2 years. I love them. They are so comfortable. The gore Tex feels like a slipper and keeps my feet dry. Plus, the color is amazing.
Are you going to do the new Origin Moc toe for Moctober fest? Very interested in that boot.
Not redwing related but would be crazy if we see Brunt’s new moc toe that’s made in the USA get chopped in half
Absolutely!! I'm a hater in general of the Brunts but I'm super curious to see what the story is on those. My bet is they're probably going to be a "decent, just overpriced" type review.
That's CRAZY 💯🔥🙏
If I'm paying as much as these cost I want at least a leather midsole. Will the rockrooster Mantua be in the moctober lineup this year?
Seems like a slab of leather over top of a thin layer of quality foam would be a good compromise, I would expect that combo to have more or less the benefits of both materials.
I'm not much of a moc toe fan, but that is a REALLY attractive moc toe boot!
Favorite series you do!! Brunt just dropped a “USA” made boot hope to see it in this years moctoeber series! Take care dude
Has Rose Anvil ever cut in half one of their steel toe "Traction Tred Lite" moc toes? I cant find a video with one of those getting cut in half, but i would really like to see what the guts if their steel toe mocs are made of. Cheers!
Is the toe box structured with plastic like thorogoods?
I hope you get to do the new origin moc toe. Looking forward to that one.
I bought them at Red Wing store event near Penn Station in NYC like two weeks ago for .... $125. Believe or not, single pair of Work boots - $99, double pair - $150. Single pair of Heritage boots - $150, double pair - $250. And I wore them next day canvassing upstate NY. 16 miles in a day. I was comfortable all the way. Of course upper rim made a small sore on my foot despite long sport sock. But overall - great feeling!
The Hoka brand has released a new Kaha 2 Frost GTX model. I think it's worth taking this model for a review. After all, winter is coming
I love red wings! And I’m glad they did those right. I have a few pairs of them for over 10 years now. And they still look great and comfortable.👌😎👍
You’re killing it please keep it up love the moctober series!!!!!!
I’ve been wanting to see how redwings cowboy boots compare to traditionally made cowboy boots. Specifically the nail seat or pecos. Most of the time I’m surprised how traditionally made their products are. Hope their cowboy boots are also traditionally made
Nice.. How does the KEEN Utility Cincinnati work boots rank for Mocktober?
I just picked up my 2nd pair of Keen Cincinnati boots (6" w/ carbon fibre toe) and highly recommend. Comfortable, keep my feet dry and durability is good. Had to replace the old ones (about two years old) when the pull loop on one finally let go.
The foam insole topping is fine. But, listen closely Red Wing, NOBODY WANTS A FIBERBOARD INSOLE FOR $369.
How many of your once competitors have burned their brand to the ground by selling crap for short term profits? Do you really want to be the next?
I'm confused, if the leather is waterproof, what's the point of the Gortex liner?
I'm not quite sure I agree that Red Wing is trying to get more people into their more hard core boots with this model. It costs more than the hard core models! I think it's a good choice as a hunting boot given the Gore-Tex and quasi-waterproofed leather, though.
I'm so surprised it took someone this long to make a gore tex moc toe.
My Irish setter boots lasted me through 14 years of drywall hanging they were the best boots I have ever owned
I'm definitely wearing it for work. It will be nice to have a steel toe, an electrical hazard & and a waterproof 8 inch version.
This is my daily driver and I love this shoes. Funny how I own both exact model shown for a comparison, and surprisingly, Gore-tex one is more comfortable. And I actually hiked with it multiple times in Colorado and it was pleasing to walk with. They are durable, and leather is surprisingly really good quality.
It would be so cool to have a 6” Rose Anvil x White’s Drifter 3.1 with that black/red tea core! Think about it guys 🤙
I love these videos!
Can you do some of the 24-- series Red Wing boots? (2475, 2462, etc)
A video idea - since winter is coming maybe You could do a comparison of few „cheap” and accesible winter shoes.
love watching these reviews. I bought the ND2 boots from one of your videos. they're still going strong.
The Blood Core Kilties look awesome and I want them. I don't have boots they would work for unfortunately. Looking forward to more stuff made out of the blood leather project.
love the redwing heritage..i wear ironrangers. You chanel is EXCELLENT!
Is this E or EE width? Or just D?
Hopefully redwing makes an 877 variant like this!!!
Yes would love to see an 8” version of these
Made a Review of the new Thursday Boots the Challenger. They seem like an impossibly awesome boot! Maybe the wholly grail of boots!
Love your work man! I'm curious as to your thoughts on Origins new moc toe boot. Would make for a good moctober addition.
In the spirit of Moctober, you should cut moc toe style slippers such as minnetonka, uggs, and any moc slippers
Good boots, I personally like the Thorogood waterproof 1957 moc toes a bit better.
DuPont Teflon tetrafluoroethylene
It's what the body craves, forever.
Didn't they change the formulas to move away from more harsher materials years ago hence why, Gore-Tex isn't as weatherproof as it once was?
@@griffservo8074stops the hepatitis and AIDS sticking to your insides. No one ever mentions that benefit
Great boots in my opinion. Redwing should make an 8” version of these.
Great video!! I know it is moctober, however, Nike has made a couple of air Jordan’s that have collaborated with A Ma Maniere. They have been marketed and believed to be the best of the best of the air Jordan’s. I’ve got a pair of air Jordan 4 A Ma’s and they are made of some sort of suede. But on the inside they seem to have a genuine leather lining to the TOE. And the suede on them looks extremely hairy, but the grain pattern is very hard to find by me. They seem to be premium. I feel like we need to know if these A Ma shoes are really that premium and really worth that premium price.
So if you had to buy the 1907 or these, what would be your choice ?
Ryan f9 has well presented and informative video about goretex .
What are you 3D printing? I hear the unmistakable sound of a Bambu Labs P1S or X1C at 8:00!
Ive had Ultradry™️ Irish Setters for 5 years. FRIGGIN LOVE THEM. there i said it.
Let Moctober begin! I have these and love them!
I would like to hear your thoughts on the duradero boot/ company. Thanks for your videos.
When Red Wings _comfort_ boot is better than the "Heavy Duty eXtreme! Warrior Work" boots of companies like Carhartt and Caterpillar.
It’s not a bad boot if you believe it
I have the original moc toe boots and found i had to go up a size with these gore tex boots because the lining makes them a tighter fit.
Well let's hope they keep it up because whatever has Gore-Tech on it. That's what I want the Jordan ones. Those are real with the Gore-Tex label. The Air Max 90s That's a real shoe made from defense material
Would love to see you guys cut open a Nippon Made Onitsuka, curious to see if the price jump actually worth it
Even with the poron, it's still super firm underfoot. It's too thin. If you value underfoot cushion in boots that feel like running shoes, they're hard to find.
They’re still a good bit softer and more comfortable under foot than the standard RW construction.
Mammut Mercury's fit the bill
Found a pair of the 8 inch red wing mock toes at a thrift store for 8.50. Snapped them up right away! My size too. I’m hoping in a few years to get them resoled, and possibly new footbed so I can break them in myself this time.
Nice!
Gore-Tex is the best. I have some Jordan 1 Gore-Tex and those Jordans are made the best they feel real like what nike used to be? Before they started using plastic
It’s been known since it came out what the 8864 was built with internally. There is no secret. I have had a pair since it mace out and I wear it in rain and snow. It being pretty good.
My very first pair of Red Wings were the double boot, unfortunetly every other boot has been a distant second
I know they aren’t Mocs but a video on the work chukka would be cool.
Really hoping you guys do the Keen Utility San Jose boots! I just got some and for light duty work they’re awesome.
If you’re 8D or 8.5D please let me know I have new pairs for sale because I sized wrong. Im a 9D and these boots kick ass!!
Can we get some hype for Whites Drifters 3s? Woo!
I wish they would do heritage mocs in a steel toe
Great Moctober start! I need these boots. Thank you.
I have nike air force one highs gortex from 2006 and I can tell you the leather is better then today's shoes
The Irish Setters are already waterproof and insulated. Hey, what's everyone wearing for Patina Thunderdome? Moctober is dead! Long live Moctober!
I'm wearing a pair of Jim Green Stockman's that I treated with Huberd's Shoe Grease because I walk around in wet grass all day.
The wing shooter is a great boot! Love the soles on those! Overall a better boot but foreign made, I wish they’d just make the wing shooter in the USA!
@@NDB469 I think you'll have to check the vintage market for a pair of American made wing shooters. 😉
That fibreboard looks so dense, looks almost like leather. It looks different than usual fibreboard
If you get the right size and style for your foot the break in process isn’t all that bad.
Maybe a work week.
If you’re actually working.
ok thanks, Now I need to go buy 1. Thanks for cutting this in half.
Moctober is Back !🎉🎉🎉
I have 875,10875,1907,8088,8089,8137and 8103, all same size 8UK D. 😊
If the leather is waterproof why do they need a goretex lining?
I'm sure the goretex lining will degrade after several months and stop working just like every other goretex boot I've owned. At least you'll be able to wax the leather up to help keep your feet dry on these boots though.
Be careful, these ARE true to size. I heard order a size down? Mistake for sure. The Iron Rangers are opposite, and run big. So if you have size 10 get a 9.
Great video, cool boot. It's too bad it only comes in that one color.
GOD bless you Weston.
You ever see the Cabela's boots? Around 100 bucks. I got some for free working for a park and actually worked in em today and it wasn't bad. I noticed reviews saying they've been the same for 30 years. They look like logger Timbs with a kiltie haha.
My red wing is an Irish setter and I only wear them during the winter as they are very warm. They may have the same lining as those but are a different model. Mine are not moc toe mine are the logger style.
3:27 what are those second from the right boots? They look sick
Unlike most people I do not see Irish setter and red wing being 2 companies. I see them as 1.
You should look at the new Origin moc-toe!
Do the Duradero Moc Toe boot.
MOCTOBER! Please cover Dievair and Craft and Glory.
This gortex option would be awesome in a taller model.
Are you thinking of looking at the Lanx Moc toe boots and see how they are made?
Can you do the Rocky Outback Gore-Tex Hiker? I think it's a pretty good budget option for boot that won't be worn everyday. They're at least made in the Dominican Republic rather than China, and the cup soles are side stitched all the way around.
Get the origin Goodyear welted moc in this month!
You need to cut some Taft 365 Mocs up! I’m super curious how they are made. $70 bucks! Look like Red Wing. Just got a pair, seem legit.
They all look like red wings, thats the point