Thank you for pointing out the software's current limiter. I thought I had a bad connection and couldn't figure out why the leds were so dim. I have a 500w (converted PC) power supply so was able to set the wled setting considerably higher than 850mA. Problem solved!
I have tried to download ESP home flasher keep getting error "Using 'COM3' as serial port. Unexpected error: could not open port 'COM3': PermissionError(13, 'Access is denied.', None, 5)
I’ve got a question I’ve got 3 5M 60led/m and want to add them to one light however In WLED it says that you shouldn’t have more than 800 is there a way to make 2 lights but make one continue after the other in the animations rather than duplicating it. Or how else could I achieve this as I plane to make a panel and plan to make more in the future
I did all the esteps, but I just can make that my WLED app found my Dig-Quad v2, and I don't know how to see what IP adress being assigned, to adding manually to the WLED app? Please advise
Looking for a little help....my lights are no longer accepting the settings and turn on random colors. I cannot control the colors or effects thru the WLED app. In fact they just turn on...and sometimes its only the first few lights in the chain.....any ideas?
Have an LED related question? Be sure to ask your question in DrZzs Discord led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.
So, I just upgraded to the new Diguno and I am only getting the first 30 leds to light. I changed settings to 150, but still only lighting 30. Why might this be happening?
I noticed I can't get the blank female header strip back in place. It's a little bit too tight with the hardware next to it and it doesn't go down far enough anymore.
Using a Falcon controller or something similar, you can upload sequences via xlights which include the music, you can those sequences to a "Playlist" which will cycle through the songs and sequences to go with the songs. Is that possible to dig quad and the esp32? How much data can be stored on the devices to make a "show"?
The best way to troubleshoot this and any other quesitons that arise is to join the discord channel. There are a lot of smart people there that can answer questions like this. It can be difficult to troubleshoot via youtube comments.
I have wled on a new Dig-quad. Is there a way to run a 10 preset playlist starting at 5pm every night for 5 hours(for a xmas display)? I have built the presets already and have the preset cycle checked.
will the lights come on as soon as you connect power, prior to selecting the output pin, or does the pin need to be configured before you'll see any lights come on? Just got the new dig quad and can't get my lights to come on.
I have a problem only the first light works turns on blue I cant change color or do anything I am going to order another quad to see this one is brand new. I put a #10 fuse because none of the fuses it came with were any good . Is there something I am missing. Thanks
@@stutzTHEman13 i figured out the problem i had the wires backwards i had the blue and white wires wrong i switched them out and it works now. On my plug the blue wire was negative and the white wire is data wire. Try that it should work.
Question about number of leds. I encountered problem with WiFi when I entered 300 APA102 leds. My whole WiFi network is slowed down and I even lost a lot of packets when pinging router from PC. Why is that? Have somebody encountered this problem?
You can set it to 0.75 in Settings>Playback Speed and he will sound normal. I kind of like the faster speed myself, his videos can get kind of lengthy without it.
Such an amazing resource thanks for putting up these videos! Are you able to help me with a question about the dig quad and dig uno? I'm trying to run ws2801 pixels and I'm not sure if it's possible to remap the clock and data pins to the screw terminal pins? I love my quad and uno and would like to be able to use them to run these pixels of possible. Thanks in advance!
Can you have several controllers acting together, i.e. they are set up independently each controlling its own strip, but then you want to make them behave as one controller driving the two strips as if it were a single longer strip?
All the coordinated strings need to be on the same controller. A Dig-Octa can handle the most separate strings. More that that and you need a falcon player or something that uses a bigger CPU.
@@DrZzs Then what is this info I saw on quinled sure about how one controller can control a second one? To quote WLED Remote Sync WLED features a method where multiple controllers can be synced to run the same effects. Since this only sends through what effect to run it doesn’t generate a lot of network data. This also means that there is no continuous sync over multiple controllers so again either using WiFi or Ethernet won’t make a very big difference. WLED Remote continuous If you do wish to run an LED strip or pixel string divided over multiple controllers and for these effects to be in perfect sync as if it’s a continuous LED strip, the setup is a little bit different. Instead of setting up a sync of the effects and data, starting from WLED 0.13 you can setup a remote controller in the LED preferences menu and it’ll all act like it’s one big continuous strip so even effects like “comet” will act like they’re moving over the multiple controllers like it’s one whole using this “DDP” option!
DrZzz you are completely right, I don’t like it at this speed, do you mind to reUpload it at normal speed, Anyway, I don’t think UA-cam won’t complain for it, right?? 😁, I hope you do it, and I will comeback to rewatch it!! 😉
I prefer the choice to increase the speed
Would’ve been hilarious if DrZzs had a pitched up squeaky voice to match
Is this on faster play mode, because i feels like i just downed 4 energy drinks
Thank you for doing these! The segment as a preset! Doh!! Makes sense, really.
Glad it helped!
He learned to overclock...himself. I approve :)
Please reupload at normal playback speed
You can play back at 0.75 speed and it sounds normal
Thank you for pointing out the software's current limiter. I thought I had a bad connection and couldn't figure out why the leds were so dim. I have a 500w (converted PC) power supply so was able to set the wled setting considerably higher than 850mA. Problem solved!
Got decaf?
I have a 150w 30amp power supply. In wled what Ma can the setting be. It defaults to 850. I am running 320 5v leds. I am new to all this.
I have tried to download ESP home flasher keep getting error "Using 'COM3' as serial port.
Unexpected error: could not open port 'COM3': PermissionError(13, 'Access is denied.', None, 5)
Great info DrZzs. Thanks for sharing.
I’ve got a question
I’ve got 3 5M 60led/m and want to add them to one light however In WLED it says that you shouldn’t have more than 800 is there a way to make 2 lights but make one continue after the other in the animations rather than duplicating it. Or how else could I achieve this as I plane to make a panel and plan to make more in the future
I did all the esteps, but I just can make that my WLED app found my Dig-Quad v2, and I don't know how to see what IP adress being assigned, to adding manually to the WLED app? Please advise
Looking for a little help....my lights are no longer accepting the settings and turn on random colors. I cannot control the colors or effects thru the WLED app. In fact they just turn on...and sometimes its only the first few lights in the chain.....any ideas?
Have an LED related question? Be sure to ask your question in DrZzs Discord led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.
just change playback to .75...or listen faster..L:OL
So, I just upgraded to the new Diguno and I am only getting the first 30 leds to light. I changed settings to 150, but still only lighting 30. Why might this be happening?
I noticed I can't get the blank female header strip back in place. It's a little bit too tight with the hardware next to it and it doesn't go down far enough anymore.
Does anyone know why when I try to connect my falcon controller to wled it just says error? Thanks
Using a Falcon controller or something similar, you can upload sequences via xlights which include the music, you can those sequences to a "Playlist" which will cycle through the songs and sequences to go with the songs. Is that possible to dig quad and the esp32? How much data can be stored on the devices to make a "show"?
Hey doc, would you happen to know how I could solve a flashing issue? Using an ESP32 DEVKIT1 board.
How many times can I split the data before I start running into issues. Im planning on running between 3-5 groups of strands off one control module
Speed Listening... its like concentrating on my GenZ grand daughter as she explains how TikToc works to me !
Pro tip: set playback speed to 0.75
Yes did the same, it's not pleasant to listen to if not set to 0.75
On my setup page it says i have 1053 leds. but i only have 695 why does it not give me the option of changing the total number of leds?
The best way to troubleshoot this and any other quesitons that arise is to join the discord channel. There are a lot of smart people there that can answer questions like this. It can be difficult to troubleshoot via youtube comments.
I have wled on a new Dig-quad.
Is there a way to run a 10 preset playlist starting at 5pm every night for 5 hours(for a xmas display)? I have built the presets already and have the preset cycle checked.
If you only plan on using your dig quad once a year, at Xmas, should you update once a year? Will it still work if you don’t? Thx.
If you are not changing the show and it's working for you, don't bother updating it.
Yay 🤩
will the lights come on as soon as you connect power, prior to selecting the output pin, or does the pin need to be configured before you'll see any lights come on? Just got the new dig quad and can't get my lights to come on.
I have a problem only the first light works turns on blue I cant change color or do anything I am going to order another quad to see this one is brand new. I put a #10 fuse because none of the fuses it came with were any good . Is there something I am missing. Thanks
I am having the same problem but my first light is green. Ive been playing around with them for a while and have only got all light up white one time
@@stutzTHEman13 i figured out the problem i had the wires backwards i had the blue and white wires wrong i switched them out and it works now. On my plug the blue wire was negative and the white wire is data wire. Try that it should work.
Whew!...a few less red bulls before the video!
Hi where can I buy Dig-uno?
Question about number of leds. I encountered problem with WiFi when I entered 300 APA102 leds. My whole WiFi network is slowed down and I even lost a lot of packets when pinging router from PC. Why is that? Have somebody encountered this problem?
i'm not getting a total led count drop down. anyone got a solution?
Holy crap I could even watch this- Normal speed man Normal!
You can set it to 0.75 in Settings>Playback Speed and he will sound normal. I kind of like the faster speed myself, his videos can get kind of lengthy without it.
Such an amazing resource thanks for putting up these videos!
Are you able to help me with a question about the dig quad and dig uno? I'm trying to run ws2801 pixels and I'm not sure if it's possible to remap the clock and data pins to the screw terminal pins? I love my quad and uno and would like to be able to use them to run these pixels of possible. Thanks in advance!
Can you have several controllers acting together, i.e. they are set up independently each controlling its own strip, but then you want to make them behave as one controller driving the two strips as if it were a single longer strip?
All the coordinated strings need to be on the same controller. A Dig-Octa can handle the most separate strings. More that that and you need a falcon player or something that uses a bigger CPU.
@@DrZzs Then what is this info I saw on quinled sure about how one controller can control a second one?
To quote
WLED Remote Sync
WLED features a method where multiple controllers can be synced to run the same effects. Since this only sends through what effect to run it doesn’t generate a lot of network data. This also means that there is no continuous sync over multiple controllers so again either using WiFi or Ethernet won’t make a very big difference.
WLED Remote continuous
If you do wish to run an LED strip or pixel string divided over multiple controllers and for these effects to be in perfect sync as if it’s a continuous LED strip, the setup is a little bit different. Instead of setting up a sync of the effects and data, starting from WLED 0.13 you can setup a remote controller in the LED preferences menu and it’ll all act like it’s one big continuous strip so even effects like “comet” will act like they’re moving over the multiple controllers like it’s one whole using this “DDP” option!
Sólo puedo sincronizar los Fx normales, como sincronizo los soundReactivos fx? than
What do you do if you have the ethernet versions of dig uno
Where do I buy WLED's?
DrZzz you are completely right, I don’t like it at this speed, do you mind to reUpload it at normal speed, Anyway, I don’t think UA-cam won’t complain for it, right?? 😁, I hope you do it, and I will comeback to rewatch it!! 😉
what the output pin number for ESP32?
Usually 2, or D2 on the board. But if you've connected the leds to another pin, just change it in led settings page 👍
Imagine if we could understand what was being said at a normal speed, would make this video worthwhile to watch
I like the faster speed, I watch many UA-cam videos at 1.25% anyway so suits me. That way I can squeeze more videos in my limited time. 😃
Hahahaha DrSpeeZzz!
Thanks god we can slow down the video to x0.75 in youtube :))
It is not possible to correct the speed on android tv, so it's kinda sad that it is "hardcoded"..
hate your screwdriver, makes me jump every time lol lol lol lol looks like it is sparking
I’m sorry I couldn’t understand a word you said, the fast forward audio is ridiculous. If I wanted to hear Alvin, I would subscribe to the chipmunks.
Dr. Z sounds like you’re on steroids. Could you slow it down a bit?
Please change the sound and reupload
just change the playback speed to 75 and its fine
I bought a dig uno from Dr. ZZZ when I hooked up my dig uno my wifi it does not display the dig uno . any help any body
A good place to ask this question is with the Pixelheads on my Discord Channel: discord.gg/8gvF67h
@@DrZzs can you sync multiple esp8266 without home wifi network?
like setting up the lights on a cabin in the middle of the forest